I am trying to install all requirements of a project so i run the command
pip install -r requirements.txt
but it gives the error
Downloading/unpacking psycopg2==2.6 (from -r requirements.txt (line 58))
Downloading psycopg2-2.6.tar.gz (367kB): 367kB downloaded
Running setup.py (path:/tmp/pip_build_root/psycopg2/setup.py) egg_info for package psycopg2
Error: b'You need to install postgresql-server-dev-X.Y for building a server-side extension or libpq-dev for building a client-side application.\n'
Complete output from command python setup.py egg_info:
running egg_info
creating pip-egg-info/psycopg2.egg-info
writing top-level names to pip-egg-info/psycopg2.egg-info/top_level.txt
writing pip-egg-info/psycopg2.egg-info/PKG-INFO
writing dependency_links to pip-egg-info/psycopg2.egg-info/dependency_links.txt
writing manifest file 'pip-egg-info/psycopg2.egg-info/SOURCES.txt'
warning: manifest_maker: standard file '-c' not found
Error: b'You need to install postgresql-server-dev-X.Y for building a server-side extension or libpq-dev for building a client-side application.\n'
----------------------------------------
Cleaning up...
Command python setup.py egg_info failed with error code 1 in /tmp/pip_build_root/psycopg2
Storing debug log for failure in /home/admin/.pip/pip.log
now i knew that i have to install postgresql-server so i used following command
sudo apt-get install postgresql
all good till now and then i ran
sudo apt-get install python-psycopg2
and then i ran my command to install requirements again but got the same error and then i searched on google and tried
sudo apt-get install libpq-dev
but i got following error
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libpq-dev : Depends: krb5-multidev but it is not going to be installed
Depends: comerr-dev but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
now i am unable to detect and correct broken package...please help me...
I ran the following commands to repair broken package and then i successfully installed Psycopg2 and Postgresql ...
sudo apt-get update
sudo apt-get install python-dev
sudo apt-get install libpq-dev
sudo apt-get install krb5-multidev
sudo apt-get install libssl1.0.0=1.0.1f-1ubuntu2 ibcomerr2=1.42.9-3ubuntu1
sudo apt-get install libssl1.0.0=1.0.1f-1ubuntu2
sudo apt-get install ibcomerr2=1.42.9-3ubuntu1
sudo apt-get update
sudo apt-get install libpq-dev
apt-get install libssl-dev krb5-multidev comerr-dev
sudo apt-get install libssl-dev krb5-multidev comerr-dev
sudo apt-get dist-upgrade
sudo apt-get update
sudo apt-get install libssl-dev krb5-multidev comerr-dev
sudo apt-get install libcomerr2
sudo apt-get install comerr-dev
sudo apt-get install libcomerr2
sudo apt-get install comerr-dev
sudo apt-get install comerr-dev
sudo apt-get install 1.42.9-3ubuntu1.3
sudo apt-get install ibcomerr2=1.42.9-3ubuntu1
sudo apt-get install git
git clone https://github.com/kos0/addRemoveDistribution.git
cd addRemoveDistribution
sudo ./enableDisableDistribution.pl enable security
sudo ./enableDisableDistribution.pl enable updates
sudo apt-get update
sudo apt-get install libpq-dev
sudo apt-get update
pip install -r requirements.txt
Just follow only Steps
sudo apt-get install git
git clone https://github.com/kos0/addRemoveDistribution.git
cd addRemoveDistribution
sudo ./enableDisableDistribution.pl enable security
sudo ./enableDisableDistribution.pl enable updates
sudo apt-get update
sudo apt-get install libpq-dev
sudo apt-get update
I Fixed issue by those above steps
Related
Please help me.
i have try out alot of way to get install, upgrade my python3.7 to python3.9 yet it keep shows up error.
sudo apt-get install python3
(Python3 is already the newest version [3.7.3-1])
sudo apt-get upgrade python3
(Python3 is already the newest version [3.7.3-1])
sudo add-apt-repository ppa:deadsnakes/ppa
(file "/user/bin/add-apt-repository", line 95, in )
(sp = SoftwareProperties(options=options)
(....)
(Error: could not find a distribution template for Raspbian/buster)
sudo apt-get install build-essential python-dev libsqlite3-dev libreadline6-dev libgdbm-dev zlib1g-dev libbz2-dev sqlite3 zip
(after install 2 newly package)
sudo apt-get install python3 python3-dev
(still back to python3.7)
anyone know how to make it to python3.9?
you have to type this in terminal:
sudo apt install python3.9
but you never can upgrade your Linux python to a newer version. It is internal.
but you can install python3.9 and use virtualenv to use your code in python3.9
I want to try new PostgreSQL and follow this instruction. But installation fails:
$ sudo apt install postgresql-client-13
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
postgresql-client-13 : Depends: libpq5 (>= 13~beta2) but 12.3-1.pgdg18.04+1 is to be installed
E: Unable to correct problems, you have held broken packages.
I also tried this instruction to resolve unmet dependencies
What did I wrong and how to install psql 13?
UPD
Content of my sources.list.d:
kes#kes-X751SA /etc/apt/sources.list.d $ cat pgdg.list
deb http://apt.postgresql.org/pub/repos/apt/ bionic-pgdg main
kes#kes-X751SA /etc/apt/sources.list.d $ cat pgdg-testing.list
deb http://apt.postgresql.org/pub/repos/apt/ bionic-pgdg-testing main 13
Also:
$ sudo apt-cache policy postgresql-13
postgresql-13:
Installed: (none)
Candidate: 13~beta2-1.pgdg18.04+1
Version table:
13~beta2-1.pgdg18.04+1 100
100 http://apt.postgresql.org/pub/repos/apt bionic-pgdg-testing/13 amd64 Packages
Had the same problem.
in /etc/apt/sources.list.d/pgdg.list where you have
deb http://apt.postgresql.org/pub/repos/apt/ focal-pgdg main
change it to
deb http://apt.postgresql.org/pub/repos/apt/ focal-pgdg main 13
then run
sudo apt update
and then you can do
sudo apt install postgresql-13 postgresql-client-13
that worked on my machine.
Just FYI:
WARNING: The data format may change between beta releases. Be prepared
to pg_dump the database contents before you upgrade the package to a
newer beta or to a final release. Check the release notes before
upgrading.
try aptitude instead of apt-get
sudo apt-get install aptitude
sudo aptitude install <package-name>
https://askubuntu.com/a/1056378/1087086
Finally at my docker container I do next commands:
RUN yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
RUN yum -y install llvm5.0-devel
RUN yum -y install centos-release-scl-rh
RUN yum -y install llvm-toolset-7-clang
#RUN rpm -Uvh https://yum.postgresql.org/11/redhat/rhel-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm --replacepkgs
#RUN yum-config-manager --enable pgdg13-updates-testing
RUN yum -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm
RUN yum -y install postgresql13 postgresql13-devel
Commented out lines were for case before 13.1 was released
i can't download any program using Ubuntu Software.
Example error defination is that(for install Kdenlive) :
Unable to install Kdenlive:
Error while installing package: mongo-tools 3.6.3-0ubuntu1 ..... '/usr/bin/bsondump'
Try this:
sudo apt-get update
sudo apt-get install mongodb-org-tools
sudo apt-get install kdenlive
and post the errors you are getting, if any.
I am trying to install MongoDD on Lubuntu following the official instructions for Ubuntu.
But when I try to run this line:
sudo apt-get install -y mongodb-org
I get this error:
jon#jon-HP-ENVY-17-Notebook-PC:~$ sudo apt-get install -y mongodb-org
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package mongodb-org
jon#jon-HP-ENVY-17-Notebook-PC:~$
What am I doing wrong?
Try "sudo apt-get update" before "sudo apt-get install -y mongodb-org"...
Or try tutorial for Lubuntu, not Ubuntu, like this: http://tutorialforlinux.com/2014/03/12/how-to-install-latest-mongodb-on-lubuntu-12-04-precise-lts-32-64bit-linux-easy-guide/
May be it's beacause of the old MongoDb's version. Try with the latest MondoDb repository url to generate the file.
Before trying sudo apt-get install -y mongodb-org , execute the following commands in your terminal
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10
# following is the repository url for Latest MongoDb version 3.0
echo "deb http://repo.mongodb.org/apt/ubuntu trusty/mongodb-org/3.0 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-3.0.list
sudo apt-get update
sudo apt-get install -y mongodb-org
I would like to use Kivy on Eclipse Indigo on Ubuntu 10.04. I understand that python 2.7 is required (2.6 is the default on 10.04) and have python 2.7 installed as well. I've done lots of research but not found an answer. Can I do this and if so how? I don't want to upgrade ubuntu nor Eclipse since this would probably destabilise existing developments.
Kivy and Eclipse are not related, and Eclipse is not necessary for running or editing Kivy programs. I can help to answer the Kivy part of your question, and will leave Eclipse to others.
Since Ubuntu 10.04 is out of support, it's hard to tell which required system packages are not available. This will probably be the most tedious part of the process. For Kivy on Ubuntu 12.04 you need:
sudo apt-get install -y build-essential mercurial git python2.7 python-dev ccache ffmpeg libsdl-image1.2-dev libsdl-mixer1.2-dev libsdl-ttf2.0-dev libsmpeg-dev libsdl1.2-dev libportmidi-dev libswscale-dev libavformat-dev libavcodec-dev zlib1g-dev unzip
Some of those packages will have different versions on Ubuntu 10.04. Hopefully they are all available in some form.
Next you need to bootstrap an up-to-date Python setuptools environment:
sudo apt-get remove --purge -y python-virtualenv python-pip python-setuptools
wget https://bitbucket.org/pypa/setuptools/raw/bootstrap/ez_setup.py -O - | sudo python2.7
rm -f setuptools*.zip
sudo easy_install-2.7 -U pip
Now you can install an up-to-date Cython:
sudo apt-get remove --purge -y cython
sudo pip2.7 install -U cython
Next you can install an up-to-date NumPy, which is required for PyGame:
sudo apt-get remove --purge -y python-numpy
sudo pip2.7 install -U numpy
Now you can install an up-to-date PyGame:
sudo apt-get remove --purge -y python-pygame
hg clone https://bitbucket.org/pygame/pygame
cd pygame
python2.7 setup.py build
sudo python2.7 setup.py install
cd ..
sudo rm -rf pygame
Now that all of the dependencies are met, you can install an up-to-date Kivy:
sudo apt-get remove --purge -y python-kivy
sudo pip install -U kivy