I have three intents, "Cold Exposure", "Poisoning" and "Frostbite". Each intent has suggestion chips to move to the next intent, i.e. the "Cold Exposure" shows a chip of "Poisoning" and "Poisoning" shows a suggestion chip of "Frostbite".
All are follow up intents of the Default Welcome Intent, so all have the "Default Welcome Intent- followup" input context.
My problem is, when I call Cold Exposure and then call Poisoning, there's no problem. However, when I call Cold Exposure and then Poisoning, and then Frostbite, I get an error "MalformedResponse 'final_response' must be set." . Im not able to call any three intents back to back. I really dont know why this is happening.Im using v2 API.
This is the only error I have in my program, so it would be great if this could be solved quick.This is a screenshot of my intents.
What is the lifespan of the "Default Welcome Intent- followup" output context in the Default Welcome Intent?
By default, when you create followup Intents, the output context lifespan set in the root Intent is 2. Each action decrements this count and the context disappears when the count reaches 0.
Try increasing the lifespan (in the grey circle next to the output context name) to something like 10 (or any other number you see fit) and remove it manually when needed in later intents (by setting it as output context with a lifespan of 0).
Florent.
I actually wouldn't have expected that the followup intents would work the way you're trying. They're all followups to the original intent, rather than to each other. So it could be that the lifespan of the original intent's Context has expired by the third one. In this case, it would revert to the Fallback Intent.
But the reason for the error message itself is that you're not sending back a reply. If you're using a fulfillment, it means it isn't sending a reply. If you're not, it could be that the "Frostbite" Intent doesn't have a reply set or that your Fallback Intent doesn't have a reply set.
Related
is there any easy way to detect that agent stopped on a roller conveyor because there are other agents ahead? I tried to use dynamic variable and conditional event but it is consuming too much performence. I don´t want to go for dynamically checking condition (with cyclic event) because I have some bad experience with it.
Thanks!
Try this:
Create a LinkedList<YourAgentType> agentsOnConveyor.
Whenever an agent enters the conveyor, call agentsOnConveyor.addLast(agent). When it leaves, call agentsOnConveyor.removeFirst(agent).
Now you have a linked representation of the agents on the conveyor.
Last, you use the "on stopped" field in the conveyor and pass the message "upstream" through the linked list, i.e. use a for-loop from the first to the last entry and send them a msg "conveyor stopped".
You may still need to check if the individual agent is moving itself or has also stopped, but it might put you on a working path
I am currently working on a parking place simulation. Before entering the parking place, a car has to cross a border. To simulate that, I added a "carMoveToBorder" block, where the car moves to a stopline. Then I added a service block to simulate the time getting served by the borderService. Now that I am having a car network, I dont really know how to specify the location of the delay or the queue inside the service block. I tried specifying the location of the delay by entering the name of the stopLine but I got an error message saying: Type mismatch: cannot convert from Agent to AnimationStaticLocationProvider
Pictures are below.
Help is appreciated.
Thank you for your time.
borderServicePicture1
borderServicePicture2
why dont you try to use Delay instead of Service. One of the difference between them is that Service has embedded queue. But maybe in your case the car will never use that queue, i mean if its right in front of border but not quite there, it means its still in CarMoveToBorder block. And i guess in Delay you just dont have to set any agent location. (btw, what happens if you leave agent location blank in Service?)
I'm linking an arcade button connected to a USB encoder with a Max patch. The button is behaving strangely. Here's what happens:
I have the button mapped to the a key. When Max is open, this functionality breaks. Even outside of Max. Even once I close Max, I need to remap the key. I'm not using MAME or anything like that; just JoytoKey for the mapping.
This issue is negated partially through use of the HIobject. Max recognizes the button and I can use it, however it's not functioning as an on/off. Rather a bang is sent on button press and release. How do I make the button work normally (send a single bang on press, and none on release)?
Here's my patch, if it helps. I don't know how useful it is without my video files:
<pre><code>
----------begin_max5_patcher----------
2245.3oc6cszbjpaEdsmpl+CTr1gB8hGYY1jJYaRVMUptvzx1ZtzPGdX6I2J
+2i3YyCoF0.M8hqbMi6FjP5b9zQe5bPvw+92+1Sluj7EMyz3Oa7Cimd524m4
opyUdlmZOwSlmB9JLJHqphlEmnwElO2TzGAowAmnBJIt3DKNhlWcUf1ydNHk
W8bZ5AZbvKQzAExxomp6j+JMllxBMLL9W+i+hgweO4WY4rveyvneymTj219n
tl3X00m7xO+S.+tJWWy7eclVqqlr3bymMLq9uw+9hvkG9NK9sCozv75Zhv9V
DhM+G.B.P1Pf+yF.Hwxl+gKn7CHzx9RajE7A83gf77T1KE4zKeKqATaQ0RrK
pfl7Z646JnOJEkD+lX.dP0NwGhJqhsnBydOIMWgFge9SM3ib7uSSGbosPKro
r+22+V82Z+Rym7OdVYKsSzrrf2ncih4zuxaJPlcFTr4APj4AQt4wBrIbsKsE
P9WrHVrdGS+jKfSU62YyL4ZnRCEnzH45bDKKegyG78rP9k+f7g1HnC.xw.d8
taHwOY4VexhOl7ow4nfeUJ5GYYm6p34TZFMNOHmkDeHhESCSJhyGPTLnJWzO
Hvxydj5g8qFacvk+lX2e19MMNzuKkZUBskOD8RP7ayODAvdkPuCeTojjBh1.
SxH1GTqJ3WDw+zRkft.WGqJCEWaWejKDa6H15AWg0.Rer9TxQZeNNy7zf3LV
KZBWwBOqY.C3cEdj4GrVChbOWqYxXpv0a.yudy0andq4vEQPIfw+DtmKyHij
IiFYPlyhF54Nkv.BpWL.O08.UVs5lr+bwqkuPUU3t.v9lKBY5C.j0B.XfqkM
4AA.dqG.bVK.f7.ON.vctoXBc4XWmh4tZ.VQU3t.vNyBv.eKzCkCya0.rhpv
1GKh+pCDg3uz.Qv1tUNYSpiCcK73Vpd5sd8zcwAbwcRxdmzSEni.R.8EAPpL
+frhPUw6lEhB7L1RFFueHGZwHG.sa1by6koqmkCtLJAOO9uID281BDrTbDx8
sPEQ+drz2rgix65p.sFHaMVoKDVuoE9vvUGruhpvcwyB7r1sDQC96nmEXvpi
NRQU3t.vnYAX.4ACvq91UopJbW.X3rTDdXKviDfQ9qlhPQU3t.vfYAXBxxy+
QBvqN3CUUgECvuFkTdaxl8lq5VuqTv16S8UwtqdmQ6tGquljdJnpCb1Brlb8
6UZEdOy8KUlRt4luoAwGSNY.rUE3qcpwwYYFs2j+XH702aSkvvox616Z67tH
fcEvNsit1hVtqsbyOv8z0Von5B8KXGQU3huoFPf28MfAon5BcFXOQ0EeKT.d
tOHa0E5Avdhp3EipDGkD8Eipkazc6NbO+xPB16ZTIWe0ONDhCAX6iJcJoZqg
Qd27dYitosF8JVqbE6.2whT1WsOGNGYgkMVP5uVf2VXazT0j.br7KOGDh4.B
1Ai4CHt98U5njDtpbNIMefVbLHOXxdnFFwN28vRMXSTexL3krjnhbJWfeuB.
9aw4oIG9mexdKH8TFz5TxGW1.TteUrHZ2VjpPc+MVbMvxKiQKOS+ZTpEC2NV
tzlDmyGgNjwGjnc66aegtZX4bQd6Fqyw1da6ZcwGZER9XVgK101FgvXyg06H
qYObAOOtIJoAJRoCZFDFU0LvQMSoVPqUyeXXOpKRC9LOYxjxdZwgltR3kmy3
7SgAQMk5XOp7ORhZz.qQkTjQOlkew7arbMnrmK+2TPnTwNmv8KK6PFMrwDpx
0U6wcWvwfy4BGLRaFFEHiGKR6lHNQBOmb4Yj3GS6vRjYnTMr7vjHdH.cVHlA
ou8h4zlPXW+ZYfEWlcMo7vfv24cN6+1d4Vf5Iw17kprA.GAh5oLgMUPQdBmO
gEJsT97fTwHKeHNKMT5PbQL6+THQAOKC13C1zzyBundVCcJyyBgttmZoqzFx
ZfgDaBafdHxnRGBGRrpuvDIbVIM9MVbmUyGuZ1rL3fmaitkCmiNkUQQVdHkO
Hec5TEpqlNUSmpoS0zoZ5zRJRvMPmBzzoZ5TMcplNUSmNlNMHH8LRApTo0SS
ipoQ0znZZTMMJTQZTcv8ZZTMMplFUSiJjFEnHMpNndMMplFUSipoQmPi1tq7
pPkd05poS0zoZ5TMc5eToSG9PNYftgmHJC8cKUSnpIT0DpZBUo6gO5F1CeMc
plNUSmpoS+CCcZaASSSX0snYYNBbbdPs5cOHpoG58BZjkTjF11sco.tdJn4Q
ZVNKt2Dlt2YOiq9xfndORTpC2t9yUk9qJ2EtU8nuYeygqqgcYHP1w9lrXDYZ
ZsBPpRQmHjS86.Y+i7qR4GnxyMIEWhr1FEChUBJcuplAbbDj0GpyRN.Gjjx1
F42cKjeemouien5zroP4uprsQ982.4GB8l91zsOxORIweLizH4WnINe5a06s
FBTm2P6ejWc1mzywBONYUVVzkNJI8HMsxQwMRWmkC.3uYjNpgsiLf5zX6sPB
.ag0Iez8AM6BoD6FhrcCYpsRnmjwLu8SDjY13tah.1VhH3reh.PhHP1OQ.JQ
D72MQvEKQDv6mHPtmrXpIBNRDAv9IBtRDA39IBxnlPagHnTfIvsKvDjRdWAm
y6PjfL.QclzQnmiUksIx+XJRIxu+LdGRDjqEZyDPdRJaajek7eXrWFikeGfb
4WjuEan7CuECVY1ObeVmlUFvMQGIJxI7VEcDYS7eyG7nhtff1.4GAgV6mDS1
BIlfq+q2wtHwaQDzHOxNhwaQLyUYY88RhcUJNDxL7f9tBRpzM7f90I4kgGUy
wHb961ww3pjEO45qQggNBxH40ZSyH0nip0s9GsMZiiRZyLyF3FNxzFT88tXz
Q0ZSyrnMTaTZt8XNKUt6LsxO4h1rMRrRtHRPyv36I3OgDMRLr+Lk1iZv+5UJ
Di+M2Z9fym+fll0HO0Jh4ofelTG.+y0GyhqOtNwEZlR+f0dI0ItPyfzv2Y4z
v1cvy7Kml79T0eYYRiKXsAeTBkkccUdXpbeEyNGTCZU4qou+MdE9+qypUK.
-----------end_max5_patcher-----------
</code></pre>
It's hard to give an exact answer without knowing what your USB device outputs, however in your patch whatever exits the [hi] object goes into the [live.text] button, which is set to Button mode, always converting it to a bang.
In the patch below I set the [live.text] button to Toggle mode. I also took the liberty of cleaning some other things up.
The next thing though is that you will need to find out what part of the output of the hi object is the information you are looking for. You can do that with a [print] object. Then you can select that number with an [unpack] and select the 1's and use that to trigger [random] (see the patch below).
----------begin_max5_patcher----------
1559.3oc6Z0ziiZCF9bxuBDmmF4O3ypdpWpZu11SqVE4P7Lw6BXpwjYFsZ+u
WaCjPBDvIgY6glLRCAaiseedd+zjusbg6F9azRWme14SNKV7skKVXZR2vhl6
W3lQdKIkTZFlaBOKilKceptOI8Moo8ew4YV9VG4NpSdU1FpvgkatKkUJUegH
cJekIS1QKc1PkuRo4N.Gh5QfsyUgfVplZhjwyWmxxoI7pbyriZFgZlY4oToY
q.aZjs0rA3a9xOAAtGGIuR1NTP6JPTa.V9KqEzDYsTiBvq.O4.AlKXXj9BBr
B37Y8y78kK0+6IKQmb5qp8QOvoPvNBYSIDwWuLfTadef5CDCgX.BFeThPFAB
MuBTUdAI4qJBT8msxUzvxEto05ljuWPqEJWCjcxEmOeYL.FFrJV+IDDFiCQd
f.EFfhWgMshiQ.LJ.hdxIL7tPjKa.jriyKo055M1.6nBps3S3Mq6hA8kRTTv
GglbIM8nA6IRDpuD4MrDgtDiugj+hlqGknQ.+AH5HCoh89HT1kNrAcQ0U4CZ
V3HCenT57a2EVx8ngQJ3.Ka21GzlYbvynUfqAJX7GCbAsDt7CuQ3B9CFt.Gz
qtC3pR41npciumHxIYz9cvjzr5w+azbpfk33372+4u537G72KkLkSWGacn.O
DIofHTKljJVSyIaRocefqya7jlmP.nu4oxAkVcqg16xzkj8zsqIRofsoRRO9
sxFjrAJ0HVZEk+bayssepvUk0rcA5MJ7vN8jgkxyeYPv+jQkoHuN3zI8UtiK
jSOEsvGptKi9R6kqT4IiVVRdg1yXqqpyTtig9ia1ziyG21P48v+7jNB75GIB
+g3kYGyVy.7UFERmv5zp4CktwPReWuaymz+Elb0qp7s4u5TjRdWuk2xJKlNS
Z73dlQvUQfy3TuXi0afwGnW703lFAFG6s1QskYFX7VG3aT3fH7co2kx1SWY.
7AbY2qyKFoa.0j3n9pId0Aj8uFzEFYi+cofjWxZQXz7vG2XVZCYfLfj+QETP
MZndmqthrHzv4j7MFdXzoYFCQLRF6.6Kw9RJxJ6HC0EFEo9uuen1qFDbLAN7
E0cGpx.z+ANFPgAyPQBOqzQTZTSY2GVmwiIkQePu7ddlKxHlAGXaXL+wr1Ay
mcsARsAN8vmKbymVqxo0VdlCDXIP6aRsLHnGPOklH16GasDHsmtS2o2.poi+
2F32hhs5ESGqgMym.e+.eHHFqMLLG9ENBzA+R47htxs9dAsP4f6rhHFOVU30
q7hmfA1JHuJ4lkv8RjhBmVqryDr2ZKdYKKQOQDw6GYK0iUTIWqU9pDzoNzkl
ZBCF.A8gpv851PHOEV6E34oc6zMmosDI47nXIorhCGBa2vXKbIaJ4opHepMx
Nin964RAe8e8J6EhHqDsJiu+PbEkaEVJ8PfmoG5WUoPVWFAeOipaoy.ZnuJP
jNKe+Pbm9NSqvHD7bohlVWpXJ5g.xcjktLV2hKpCjySaTWOhUlNDMyV+dR3o
Jmn7ssbMQ7xlSmzpb1+T0z8oOqxXkJJNzSaGMgeasDmfJXF7UeKUUX9nTwzC
0JpHvSqc4G8fJFkJf1SEvakJhBLTQ7CpXPpfPDE3oogKMLqn.jef18K3AEbQ
J.YGEbyNj7hMT.7AEbQJ.ZGEbyNhv.sin.zCJXPJnM8GKngwFpcwDPFqA7Cp
XzjVcv1m0pyMGcvGqq5Iv6AYLZtRX6yU5lohvProNo+eQEMMdxY4YlBW8Auc
1O5FSgl51Osn+RdkHoc607xLb5TLIsTxxOTY7mN7CHoyX3hsTgol1AOmAaW3
H0jBmXgMmHsykNQi4TDiFVDg20B6YwBi8lAI7.NM5RMGqDxh0Qe1L28BoOP2
I0OPyA1YgDglKAZRnaNT28sQWXNDIrUJ39yjI7jNKN0MUFaaAW4TswuHLdnW
bVP+WeTj+pPuabb0+9WfPvJu3A55d0Tis.EvygIQnMpp52E68uT1nr1WlpC6
QJJ1SEkMC1rFtYjuvMttidxbKKu9VyAv5Jn6YsiutEhHYGSRSZOnV22BpO.e
WcbbQdEqINfR5VpOYURYoNclxBRsfXNX8kee4+Jwi4ZG
-----------end_max5_patcher-----------
I'm trying to create an agent statechart where a transition should happen every day at 4 pm (except weekends).
I have already tried:
1. a conditional transition (condition: getHourOfDay() == 16)
2: A timeout transition that will "reinsert" my agent into the chart every 1 s and check if time = 16.
My code is still not running, does anyone have any idea how to solve it?
This is my statechart view. Customer is a single resource that is supposed to "get" the products out of my stock everyday at 4pm. It is supposed to happen in the "Active" state.
I have set a timeout transition (from Active-Active) that runs every 1s.
Inside my "Active" state in the "entrance action" i wrote my code to check if it is 4 pm and run my action if so.
I thought since i set a timeout transition it would check my condition every 1s, but apparently it is not working.
Your agent does not enter the Active state via an internal transition.
Redraw the transition to actually go out of the Active state and then enter it again as below:
Don't use condition-based transitions, for performance reasons. In your case, it also never triggers because it is only evaluated when something happens in the model. Incidentally, that is not the case at 4pm.
re your timeout approach: Why would you "reinsert" your agent into its own statechart? Not sure I understand...
Why not set up a schedule or event with your recurrence requirement and make it send a message to the statechart: stateChart.fireEvent("trigger!");. In your statechart, add a message-based transition that waits for this message. This will work.
Be careful to understand the difference between the Statechart.fireEvent() and the Statechart.receiveMessage() functions, though.
PS: and agree with Felipe: please start using SOF the way it is meant, i.e. also mark replies as solved. It helps us but also future users to quickly find solutions :-) cheers
In my Text Editor application, I save the users font format selection as a preference.
Signals and slots are first set up in the constructor, and then the preferences are read as in the code below:
Constructor:
boldAction->setCheckable(true);
italicAction->setCheckable(true);
underlineAction->setCheckable(true);
fontSizeSelector->setCheckable(false);
connect(boldAction,SIGNAL(changed()),this,SLOT(bold()));
connect(italicAction,SIGNAL(triggered()),this,SLOT(italic()));
connect(underlineAction,SIGNAL(triggered()),this,SLOT(underline()));
ReadUserPreferences():
void TextEditor::readUserPreferences()
{
QSettings userPreferences(QSettings::NativeFormat,QSettings::UserScope,ORGANIZATION_TITLE,APPLICATION_TITLE);
this->boldAction->setChecked( userPreferences.value("appearance/bold").toBool() );
this->italicAction->setChecked( userPreferences.value("appearance/italic").toBool() );
this->underlineAction->setChecked( userPreferences.value("appearance/underline").toBool());
//other code.
}
Now, in the readPreferences function, when boldAction->setChecked(true);, shouldn't the text become bold because the signal and slot mechanism has already been defined? If so, then why isn't it working on my application? The bold function itself works perfectly fine.
Is there a better way of doing this than what I'm doing? Thanks for your help
There appear to be two things wrong here.
Firstly, you are connecting to the wrong signals. The changed signal does not pass a value indicating the action's checked state, and triggered is not emitted at all when setChecked is called. You need to connect to the toggled signal.
Secondly, the signal will only be emitted if the checked state has changed. So if the action is already checked and the user preference evaluates to true, nothing will happen. You probably need to take steps to ensure the appropriate default state is set before connecting the signals.