So we're setting up a release where we want to copy some artifacts to a target server in order to start a deploy. unfortunately when the task starts it errors out on the actual copy with the following error:
The term 'robocopy' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
However when checking both source and target machine the robocopy command (both from Powershell and CMD.exe run perfectly and presents the default robocopy starting screen.
We're using a private build agent running windows server 2016.
I've checked PATH variables and C:\Windows\System32 is in the list and running a search on both systems gives back robocopy.exe in the same directory.
running the task on a hosted agent makes it run fine. So it definitely is a local issue, just don't see where this might be coming from.
results of echo %PATH% and robocopy on the build agent:
Results of the Release with the failing task:
As requested by Shayki the task definition:
for some unknown reason the %PATH% variable would show C:\Windows\System32 when doing echo %PATH% however when going through the environment variables inside control panel there was no entry for it inside the PATH environment variable.
Added the C:\Windows\System32 folder back into PATH system environment Variables (and putting it on top) fixed it for us.
Related
I have a third party application that has following two files in c:\sandbox folder.
SomeApplication.exe
SomeApplication.ini
The executable uses the ini file for various configuration settings. When I run this executable from the powershell command prompt after change my directory to c:\sandbox, all works great.
PS C:\sandbox> SomeApplication.exe
INFO: Its working great
However when I try to run same application without changing my directory to sandbox folder, it does not work.
PS C:\> .\Sandbox\SomeApplication.exe
ERROR: SomeApplication.ini could not be found
I try to do following before running the application
PS C:\> Set-Location -Path "C:\Sandbox"
But still get same error. Any idea what could be wrong?
The program assumes that it will be launched from the current directory and looks for the ini file using windows apis that search the current direction and the path. If you add it to the path it might work.
Evening,
I have recently installed TFS2015 and investigating the Release Management integrated solution, but have come across a huge blocker that I just cannot make sense of.
I currently have a RM2013 build working with TFS, RM Server 2013, and Powershell DSC and have setup a new deployment in RM2015, it has a single task in it 'Execute Powershell on Remote Machine' - with a very simple powershell script just writing out a string to the verbose listener.
I have verified that the file is transferred to the Agent working directory as part of the artifact transfer process, and if I call Import-Module "path to script" (Which is what the PowerShellonTargetMachines script seems to do under the hood) in the ISE of the remote server, my script runs perfectly fine - but no matter what I do, in TFS release 2015 I get this error without fail:
[error]The term 'path to script\test.ps1' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. For more info please refer to http://aka.ms/powershellontargetmachinesreadme
Now just to double confirm, the path to the scrpt is 100% correct, I have pasted it into a local ISE on the remote server, and it executes perfectly fine - but from TFS2015 Execute Powershell on Remote Server - it simply fails to run, in fact any script I point at fails to run with the exact same error (I initially thought it might be a DSC component install failure, but even with a simple test script the same issue occurs without fail!
My path in the tasks Deployment>Powershell Script parameter input is:
c:\test_scripts\test.ps1
I have tried with quotes, without quotes, dot sourcing - nothing makes a difference which is making me think something fundamentally is either broken with my installation, or I am simply doing this wrong.
Any ideas gratefully received!!!
The script has to already be on the machine. You can push the script using the "Windows Machine File Copy" task.
Fixed this... make sure you execute the PS1 file on the release agent itself unless copying the powershell files to the remote node via file copy first as indicated below
All,
Note: I have updated the question after some feedback.
Thanks to #jisaak for his help so far.
I have the need to run a PowerShell script that adds TCP bindings and some other stuff when I deploy my Cloud Service.
Here is my Cloud Service Project:
Here is my Cloud Service Project and Webrole project:
Here is my task in ServiceDefinition.csdef:
And here is the PowerShell script I want to run:
here is my attempt at the Startup.cmd:
When I deploy I get this in the Azure log:
And this in the powershell log:
Any help would be very much appreciated.
I think I am nearly there but following other people syntax on the web doesn't seem to get me there.
thanks
Russ
I think the issue is that the working directory of the batch command interpreter when it runs Startup.cmd runs is not as expected.
The Startup.cmd is located in the \approot\bin\Startup directory but the working directory is \approot\bin.
Therefore the command .\RoleStartup.ps1 is not able to find the RoleStartup.ps1 as it is looking in the bin directory not in the bin\Startup directory.
Solutions I know to this are:
Solution 1:
Use ..\Startup\RoleStartup.ps1 to call the RoleStartup.ps1 from Startup.cmd.
Soltuion 2:
Change the current working directory in Startup.cmd so that the relative path .\RoleStartup.ps1 is found. I do this by CHDIR %~dp0 (see here) to change into the directory that contains Startup.cmd.
Solution 3:
As Don Lockhart's answer suggested, do not copy the Startup directory to the output, instead leave it set as "Content" in the Visual Studio project. This means the files within it will exist in the \approot\Startup directory on the Azure instance. (You would then want to make sure that the Startup folder is not publically accessible via IIS!). Then update the reference to Startup.cmd in ServiceDefinition.csdef to ..\Startup\Startup.cmd, and update the reference to RoleStartup.ps1 in Startup.cmd to ..\Startup\RoleStartup.ps1. This works on the fact that the working directory is bin and uses ..\Startup to always locate the Startup directory relative to it.
You don't need to set the executionpolicy within your cmd - just call the script. Also, you should use a relative path because you can't rely that there is C disk.
Change your batch to:
powershell -executionpolicy unrestricted -file .\RoleStartup.ps1
Right click on the RoleStartup.ps1 and Startup.cmdin Visual Studio and ensure that the Copy to Output directory is set to copy always.
If this still doesn't work, remove the startup call in your csdef, deploy the service, rdp into it and try to invoke the script by yourself to retrieve any errors.
Edit:
Try to adopt your script as below:
Import-Module WebAdministration
$site = $null
do # gets the first website until the result is not $null
{
$site = Get-WebSite | select -first 1
Sleep 1
}
until ($site)
# get the appcmd path
$appcmd = Join-Path ([System.Environment]::GetFolderPath('System')) 'inetsrv\appcmd.exe'
# ensure the appcmd.exe is present
if (-not (Test-Path $appcmd))
{
throw "appcmd.exe not found in '$appcmd'"
}
# The rest of your script ....
I've found it easier in the past to not copy the content to the output directory. I have approot\bin as the working directory. My startUp task element's commandLine attribute uses a relative reference to the .cmd file like so:
The .cmd file references the PowerShell script relatively from the working directory as well:
PowerShell -ExecutionPolicy Unrestricted -f ..\StartUp\RoleStartup.ps1
Ok,
So I am coming back to this after many different attempts to make it work.
I have tried using:
Startup config in the ServiceDefinition.csdef
I have tried registering a scheduled task on the server that scans the Windows Azure log looking for [System[Provider[#Name='Windows Azure Runtime 2.6.0.0'] and EventID=10004]]
Nothing worked either due to security or the timing of events and IIS not being fully setup yet.
So I finally bit the bullet and used my Webrole.cs => public override bool OnStart() method:
Combined with this in the ServiceDefinition.csdef:
Now it all works. This was not the most satisfying result as some of the other ways to do it felt more elegant. Also, many others posted that they got the other ways of doing it to work. Maybe I would have got there eventually but my time was restricted.
thanks
Russ
I have changed the shell key in windows registry to gain custom shell (Kiosk usage):
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon]
I set shell key to a batch file which runs two applications as below:
start "myFirstAppTitle" "myAppPath\myApp1.exe"
start "mySecondAppTitle" "myAppPath\myApp2.exe"
Each application runs but the second application which needs some files to be excuted throws an error which says could not find dependency files. whereas the dependency files are adjoining to the exe file and the mentioned app works fine, when starts from startup.
Meanwhile when i run the batch file manually it rusn fine.
I added the PATH command to the batch file but it did't work too.
Change the batch file to this:
set PATH=%PATH%;C:\MyAppPath
start "myFirstAppTitle" "myApp1.exe"
start "mySecondAppTitle" "myApp2.exe"
If you start executables without an absolute path, the path is relative to the current working directory. Also, when you specify an executable with a relative path, %PATH% is not searched for a matching subfolder with a matching executable.
Since the script worked when you manually started it, your working directory probably was C:\. However, when run at logon as a replacement shell, the working directory is most likely "%SystemRoot%\system32".
The problem solved strangely, i removed the title parameter of start command and it worked. In fact i used start command this fashion:
set PATH=%PATH%;C:\MyAppPath
start myapp.exe
start myapp2.exe
I have TFS running an automated build. The solution runs a cmd file which runs out batch file and then performs and xcopy at the end to copy the results to our release PC.
If I run the cmd file manually the files copy over.
If I run it in the automated build then it fails with an Access denied cannot create directory error (the directory is there).
Is there an issue with sevices creating directories on other PCs or anything like that?
Sorted - the PC name needed to be added as a user on the remote machine in order to have access rights!