Related
I need to convert PostgreSQL native queries to JPQL. How the following two SQL statements can be translated:
INSERT INTO my_table (id, some_data) VALUES (?1,?2) ON CONFLICT (id) DO NOTHING;
INSERT INTO other_table (id, other_data) VALUES (?1, ?2) ON CONFLICT DO UPDATE SET other_data = ?2
PostgreSQL ensures that each of the two statements will be executed atomically and will never fail due to conflict. How to archive the same functionality with JPA (EclipseLink)?
I am trying to do an UPSERT in DB2 9.7 without creating a temporary table to merge. I am specifying values as parameters, however I'm always getting a syntax error for the comma separating the values when I try to include more than one row of values.
MERGE INTO table_name AS tab
USING (VALUES
(?,?),
(?,?)
) AS merge (COL1, COL2)
ON tab.COL1 = merge.COL1
WHEN MATCHED THEN
UPDATE SET tab.COL1 = merge.COL1,
tab.COL2 = merge.COL2
WHEN NOT MATCHED THEN
INSERT (COL1, COL2)
VALUES (merge.COL1, merge.COL2)
I have also tried teknopaul's answer from Does DB2 have an “insert or update” statement, but have received another syntax error complaining about the use of SELECT.
Does anybody know how to correctly include a table with values in my merge, without actually creating/dropping one on the database?
I believe you need something like USING (SELECT * FROM VALUES ( ...) ) AS ...
Several months ago I learned from an answer on Stack Overflow how to perform multiple updates at once in MySQL using the following syntax:
INSERT INTO table (id, field, field2) VALUES (1, A, X), (2, B, Y), (3, C, Z)
ON DUPLICATE KEY UPDATE field=VALUES(Col1), field2=VALUES(Col2);
I've now switched over to PostgreSQL and apparently this is not correct. It's referring to all the correct tables so I assume it's a matter of different keywords being used but I'm not sure where in the PostgreSQL documentation this is covered.
To clarify, I want to insert several things and if they already exist to update them.
PostgreSQL since version 9.5 has UPSERT syntax, with ON CONFLICT clause. with the following syntax (similar to MySQL)
INSERT INTO the_table (id, column_1, column_2)
VALUES (1, 'A', 'X'), (2, 'B', 'Y'), (3, 'C', 'Z')
ON CONFLICT (id) DO UPDATE
SET column_1 = excluded.column_1,
column_2 = excluded.column_2;
Searching postgresql's email group archives for "upsert" leads to finding an example of doing what you possibly want to do, in the manual:
Example 38-2. Exceptions with UPDATE/INSERT
This example uses exception handling to perform either UPDATE or INSERT, as appropriate:
CREATE TABLE db (a INT PRIMARY KEY, b TEXT);
CREATE FUNCTION merge_db(key INT, data TEXT) RETURNS VOID AS
$$
BEGIN
LOOP
-- first try to update the key
-- note that "a" must be unique
UPDATE db SET b = data WHERE a = key;
IF found THEN
RETURN;
END IF;
-- not there, so try to insert the key
-- if someone else inserts the same key concurrently,
-- we could get a unique-key failure
BEGIN
INSERT INTO db(a,b) VALUES (key, data);
RETURN;
EXCEPTION WHEN unique_violation THEN
-- do nothing, and loop to try the UPDATE again
END;
END LOOP;
END;
$$
LANGUAGE plpgsql;
SELECT merge_db(1, 'david');
SELECT merge_db(1, 'dennis');
There's possibly an example of how to do this in bulk, using CTEs in 9.1 and above, in the hackers mailing list:
WITH foos AS (SELECT (UNNEST(%foo[])).*)
updated as (UPDATE foo SET foo.a = foos.a ... RETURNING foo.id)
INSERT INTO foo SELECT foos.* FROM foos LEFT JOIN updated USING(id)
WHERE updated.id IS NULL;
See a_horse_with_no_name's answer for a clearer example.
Warning: this is not safe if executed from multiple sessions at the same time (see caveats below).
Another clever way to do an "UPSERT" in postgresql is to do two sequential UPDATE/INSERT statements that are each designed to succeed or have no effect.
UPDATE table SET field='C', field2='Z' WHERE id=3;
INSERT INTO table (id, field, field2)
SELECT 3, 'C', 'Z'
WHERE NOT EXISTS (SELECT 1 FROM table WHERE id=3);
The UPDATE will succeed if a row with "id=3" already exists, otherwise it has no effect.
The INSERT will succeed only if row with "id=3" does not already exist.
You can combine these two into a single string and run them both with a single SQL statement execute from your application. Running them together in a single transaction is highly recommended.
This works very well when run in isolation or on a locked table, but is subject to race conditions that mean it might still fail with duplicate key error if a row is inserted concurrently, or might terminate with no row inserted when a row is deleted concurrently. A SERIALIZABLE transaction on PostgreSQL 9.1 or higher will handle it reliably at the cost of a very high serialization failure rate, meaning you'll have to retry a lot. See why is upsert so complicated, which discusses this case in more detail.
This approach is also subject to lost updates in read committed isolation unless the application checks the affected row counts and verifies that either the insert or the update affected a row.
With PostgreSQL 9.1 this can be achieved using a writeable CTE (common table expression):
WITH new_values (id, field1, field2) as (
values
(1, 'A', 'X'),
(2, 'B', 'Y'),
(3, 'C', 'Z')
),
upsert as
(
update mytable m
set field1 = nv.field1,
field2 = nv.field2
FROM new_values nv
WHERE m.id = nv.id
RETURNING m.*
)
INSERT INTO mytable (id, field1, field2)
SELECT id, field1, field2
FROM new_values
WHERE NOT EXISTS (SELECT 1
FROM upsert up
WHERE up.id = new_values.id)
See these blog entries:
Upserting via Writeable CTE
WAITING FOR 9.1 – WRITABLE CTE
WHY IS UPSERT SO COMPLICATED?
Note that this solution does not prevent a unique key violation but it is not vulnerable to lost updates.
See the follow up by Craig Ringer on dba.stackexchange.com
In PostgreSQL 9.5 and newer you can use INSERT ... ON CONFLICT UPDATE.
See the documentation.
A MySQL INSERT ... ON DUPLICATE KEY UPDATE can be directly rephrased to a ON CONFLICT UPDATE. Neither is SQL-standard syntax, they're both database-specific extensions. There are good reasons MERGE wasn't used for this, a new syntax wasn't created just for fun. (MySQL's syntax also has issues that mean it wasn't adopted directly).
e.g. given setup:
CREATE TABLE tablename (a integer primary key, b integer, c integer);
INSERT INTO tablename (a, b, c) values (1, 2, 3);
the MySQL query:
INSERT INTO tablename (a,b,c) VALUES (1,2,3)
ON DUPLICATE KEY UPDATE c=c+1;
becomes:
INSERT INTO tablename (a, b, c) values (1, 2, 10)
ON CONFLICT (a) DO UPDATE SET c = tablename.c + 1;
Differences:
You must specify the column name (or unique constraint name) to use for the uniqueness check. That's the ON CONFLICT (columnname) DO
The keyword SET must be used, as if this was a normal UPDATE statement
It has some nice features too:
You can have a WHERE clause on your UPDATE (letting you effectively turn ON CONFLICT UPDATE into ON CONFLICT IGNORE for certain values)
The proposed-for-insertion values are available as the row-variable EXCLUDED, which has the same structure as the target table. You can get the original values in the table by using the table name. So in this case EXCLUDED.c will be 10 (because that's what we tried to insert) and "table".c will be 3 because that's the current value in the table. You can use either or both in the SET expressions and WHERE clause.
For background on upsert see How to UPSERT (MERGE, INSERT ... ON DUPLICATE UPDATE) in PostgreSQL?
I was looking for the same thing when I came here, but the lack of a generic "upsert" function botherd me a bit so I thought you could just pass the update and insert sql as arguments on that function form the manual
that would look like this:
CREATE FUNCTION upsert (sql_update TEXT, sql_insert TEXT)
RETURNS VOID
LANGUAGE plpgsql
AS $$
BEGIN
LOOP
-- first try to update
EXECUTE sql_update;
-- check if the row is found
IF FOUND THEN
RETURN;
END IF;
-- not found so insert the row
BEGIN
EXECUTE sql_insert;
RETURN;
EXCEPTION WHEN unique_violation THEN
-- do nothing and loop
END;
END LOOP;
END;
$$;
and perhaps to do what you initially wanted to do, batch "upsert", you could use Tcl to split the sql_update and loop the individual updates, the preformance hit will be very small see http://archives.postgresql.org/pgsql-performance/2006-04/msg00557.php
the highest cost is executing the query from your code, on the database side the execution cost is much smaller
There is no simple command to do it.
The most correct approach is to use function, like the one from docs.
Another solution (although not that safe) is to do update with returning, check which rows were updates, and insert the rest of them
Something along the lines of:
update table
set column = x.column
from (values (1,'aa'),(2,'bb'),(3,'cc')) as x (id, column)
where table.id = x.id
returning id;
assuming id:2 was returned:
insert into table (id, column) values (1, 'aa'), (3, 'cc');
Of course it will bail out sooner or later (in concurrent environment), as there is clear race condition in here, but usually it will work.
Here's a longer and more comprehensive article on the topic.
I use this function merge
CREATE OR REPLACE FUNCTION merge_tabla(key INT, data TEXT)
RETURNS void AS
$BODY$
BEGIN
IF EXISTS(SELECT a FROM tabla WHERE a = key)
THEN
UPDATE tabla SET b = data WHERE a = key;
RETURN;
ELSE
INSERT INTO tabla(a,b) VALUES (key, data);
RETURN;
END IF;
END;
$BODY$
LANGUAGE plpgsql
Personally, I've set up a "rule" attached to the insert statement. Say you had a "dns" table that recorded dns hits per customer on a per-time basis:
CREATE TABLE dns (
"time" timestamp without time zone NOT NULL,
customer_id integer NOT NULL,
hits integer
);
You wanted to be able to re-insert rows with updated values, or create them if they didn't exist already. Keyed on the customer_id and the time. Something like this:
CREATE RULE replace_dns AS
ON INSERT TO dns
WHERE (EXISTS (SELECT 1 FROM dns WHERE ((dns."time" = new."time")
AND (dns.customer_id = new.customer_id))))
DO INSTEAD UPDATE dns
SET hits = new.hits
WHERE ((dns."time" = new."time") AND (dns.customer_id = new.customer_id));
Update: This has the potential to fail if simultaneous inserts are happening, as it will generate unique_violation exceptions. However, the non-terminated transaction will continue and succeed, and you just need to repeat the terminated transaction.
However, if there are tons of inserts happening all the time, you will want to put a table lock around the insert statements: SHARE ROW EXCLUSIVE locking will prevent any operations that could insert, delete or update rows in your target table. However, updates that do not update the unique key are safe, so if you no operation will do this, use advisory locks instead.
Also, the COPY command does not use RULES, so if you're inserting with COPY, you'll need to use triggers instead.
Similar to most-liked answer, but works slightly faster:
WITH upsert AS (UPDATE spider_count SET tally=1 WHERE date='today' RETURNING *)
INSERT INTO spider_count (spider, tally) SELECT 'Googlebot', 1 WHERE NOT EXISTS (SELECT * FROM upsert)
(source: http://www.the-art-of-web.com/sql/upsert/)
I custom "upsert" function above, if you want to INSERT AND REPLACE :
`
CREATE OR REPLACE FUNCTION upsert(sql_insert text, sql_update text)
RETURNS void AS
$BODY$
BEGIN
-- first try to insert and after to update. Note : insert has pk and update not...
EXECUTE sql_insert;
RETURN;
EXCEPTION WHEN unique_violation THEN
EXECUTE sql_update;
IF FOUND THEN
RETURN;
END IF;
END;
$BODY$
LANGUAGE plpgsql VOLATILE
COST 100;
ALTER FUNCTION upsert(text, text)
OWNER TO postgres;`
And after to execute, do something like this :
SELECT upsert($$INSERT INTO ...$$,$$UPDATE... $$)
Is important to put double dollar-comma to avoid compiler errors
check the speed...
According the PostgreSQL documentation of the INSERT statement, handling the ON DUPLICATE KEY case is not supported. That part of the syntax is a proprietary MySQL extension.
I have the same issue for managing account settings as name value pairs.
The design criteria is that different clients could have different settings sets.
My solution, similar to JWP is to bulk erase and replace, generating the merge record within your application.
This is pretty bulletproof, platform independent and since there are never more than about 20 settings per client, this is only 3 fairly low load db calls - probably the fastest method.
The alternative of updating individual rows - checking for exceptions then inserting - or some combination of is hideous code, slow and often breaks because (as mentioned above) non standard SQL exception handling changing from db to db - or even release to release.
#This is pseudo-code - within the application:
BEGIN TRANSACTION - get transaction lock
SELECT all current name value pairs where id = $id into a hash record
create a merge record from the current and update record
(set intersection where shared keys in new win, and empty values in new are deleted).
DELETE all name value pairs where id = $id
COPY/INSERT merged records
END TRANSACTION
CREATE OR REPLACE FUNCTION save_user(_id integer, _name character varying)
RETURNS boolean AS
$BODY$
BEGIN
UPDATE users SET name = _name WHERE id = _id;
IF FOUND THEN
RETURN true;
END IF;
BEGIN
INSERT INTO users (id, name) VALUES (_id, _name);
EXCEPTION WHEN OTHERS THEN
UPDATE users SET name = _name WHERE id = _id;
END;
RETURN TRUE;
END;
$BODY$
LANGUAGE plpgsql VOLATILE STRICT
For merging small sets, using the above function is fine. However, if you are merging large amounts of data, I'd suggest looking into http://mbk.projects.postgresql.org
The current best practice that I'm aware of is:
COPY new/updated data into temp table (sure, or you can do INSERT if the cost is ok)
Acquire Lock [optional] (advisory is preferable to table locks, IMO)
Merge. (the fun part)
UPDATE will return the number of modified rows. If you use JDBC (Java), you can then check this value against 0 and, if no rows have been affected, fire INSERT instead. If you use some other programming language, maybe the number of the modified rows still can be obtained, check documentation.
This may not be as elegant but you have much simpler SQL that is more trivial to use from the calling code. Differently, if you write the ten line script in PL/PSQL, you probably should have a unit test of one or another kind just for it alone.
Edit: This does not work as expected. Unlike the accepted answer, this produces unique key violations when two processes repeatedly call upsert_foo concurrently.
Eureka! I figured out a way to do it in one query: use UPDATE ... RETURNING to test if any rows were affected:
CREATE TABLE foo (k INT PRIMARY KEY, v TEXT);
CREATE FUNCTION update_foo(k INT, v TEXT)
RETURNS SETOF INT AS $$
UPDATE foo SET v = $2 WHERE k = $1 RETURNING $1
$$ LANGUAGE sql;
CREATE FUNCTION upsert_foo(k INT, v TEXT)
RETURNS VOID AS $$
INSERT INTO foo
SELECT $1, $2
WHERE NOT EXISTS (SELECT update_foo($1, $2))
$$ LANGUAGE sql;
The UPDATE has to be done in a separate procedure because, unfortunately, this is a syntax error:
... WHERE NOT EXISTS (UPDATE ...)
Now it works as desired:
SELECT upsert_foo(1, 'hi');
SELECT upsert_foo(1, 'bye');
SELECT upsert_foo(3, 'hi');
SELECT upsert_foo(3, 'bye');
PostgreSQL >= v15
Big news on this topic as in PostgreSQL v15, it is possible to use MERGE command. In fact, this long awaited feature was listed the first of the improvements of the v15 release.
This is similar to INSERT ... ON CONFLICT but more batch-oriented. It has a powerful WHEN MATCHED vs WHEN NOT MATCHED structure that gives the ability to INSERT, UPDATE or DELETE on such conditions.
It not only eases bulk changes, but it even adds more control that tradition UPSERT and INSERT ... ON CONFLICT
Take a look at this very complete sample from official page:
MERGE INTO wines w
USING wine_stock_changes s
ON s.winename = w.winename
WHEN NOT MATCHED AND s.stock_delta > 0 THEN
INSERT VALUES(s.winename, s.stock_delta)
WHEN MATCHED AND w.stock + s.stock_delta > 0 THEN
UPDATE SET stock = w.stock + s.stock_delta
WHEN MATCHED THEN
DELETE;
PostgreSQL v9, v10, v11, v12, v13, v14
If version is under v15 and over v9.5 , probably best choice is to use UPSERT syntax, with ON CONFLICT clause
Here is the example how to do upsert with params and without special sql constructions
if you have special condition (sometimes you can't use 'on conflict' because you can't create constraint)
WITH upd AS
(
update view_layer set metadata=:metadata where layer_id = :layer_id and view_id = :view_id returning id
)
insert into view_layer (layer_id, view_id, metadata)
(select :layer_id layer_id, :view_id view_id, :metadata metadata FROM view_layer l
where NOT EXISTS(select id FROM upd WHERE id IS NOT NULL) limit 1)
returning id
maybe it will be helpful
Several months ago I learned from an answer on Stack Overflow how to perform multiple updates at once in MySQL using the following syntax:
INSERT INTO table (id, field, field2) VALUES (1, A, X), (2, B, Y), (3, C, Z)
ON DUPLICATE KEY UPDATE field=VALUES(Col1), field2=VALUES(Col2);
I've now switched over to PostgreSQL and apparently this is not correct. It's referring to all the correct tables so I assume it's a matter of different keywords being used but I'm not sure where in the PostgreSQL documentation this is covered.
To clarify, I want to insert several things and if they already exist to update them.
PostgreSQL since version 9.5 has UPSERT syntax, with ON CONFLICT clause. with the following syntax (similar to MySQL)
INSERT INTO the_table (id, column_1, column_2)
VALUES (1, 'A', 'X'), (2, 'B', 'Y'), (3, 'C', 'Z')
ON CONFLICT (id) DO UPDATE
SET column_1 = excluded.column_1,
column_2 = excluded.column_2;
Searching postgresql's email group archives for "upsert" leads to finding an example of doing what you possibly want to do, in the manual:
Example 38-2. Exceptions with UPDATE/INSERT
This example uses exception handling to perform either UPDATE or INSERT, as appropriate:
CREATE TABLE db (a INT PRIMARY KEY, b TEXT);
CREATE FUNCTION merge_db(key INT, data TEXT) RETURNS VOID AS
$$
BEGIN
LOOP
-- first try to update the key
-- note that "a" must be unique
UPDATE db SET b = data WHERE a = key;
IF found THEN
RETURN;
END IF;
-- not there, so try to insert the key
-- if someone else inserts the same key concurrently,
-- we could get a unique-key failure
BEGIN
INSERT INTO db(a,b) VALUES (key, data);
RETURN;
EXCEPTION WHEN unique_violation THEN
-- do nothing, and loop to try the UPDATE again
END;
END LOOP;
END;
$$
LANGUAGE plpgsql;
SELECT merge_db(1, 'david');
SELECT merge_db(1, 'dennis');
There's possibly an example of how to do this in bulk, using CTEs in 9.1 and above, in the hackers mailing list:
WITH foos AS (SELECT (UNNEST(%foo[])).*)
updated as (UPDATE foo SET foo.a = foos.a ... RETURNING foo.id)
INSERT INTO foo SELECT foos.* FROM foos LEFT JOIN updated USING(id)
WHERE updated.id IS NULL;
See a_horse_with_no_name's answer for a clearer example.
Warning: this is not safe if executed from multiple sessions at the same time (see caveats below).
Another clever way to do an "UPSERT" in postgresql is to do two sequential UPDATE/INSERT statements that are each designed to succeed or have no effect.
UPDATE table SET field='C', field2='Z' WHERE id=3;
INSERT INTO table (id, field, field2)
SELECT 3, 'C', 'Z'
WHERE NOT EXISTS (SELECT 1 FROM table WHERE id=3);
The UPDATE will succeed if a row with "id=3" already exists, otherwise it has no effect.
The INSERT will succeed only if row with "id=3" does not already exist.
You can combine these two into a single string and run them both with a single SQL statement execute from your application. Running them together in a single transaction is highly recommended.
This works very well when run in isolation or on a locked table, but is subject to race conditions that mean it might still fail with duplicate key error if a row is inserted concurrently, or might terminate with no row inserted when a row is deleted concurrently. A SERIALIZABLE transaction on PostgreSQL 9.1 or higher will handle it reliably at the cost of a very high serialization failure rate, meaning you'll have to retry a lot. See why is upsert so complicated, which discusses this case in more detail.
This approach is also subject to lost updates in read committed isolation unless the application checks the affected row counts and verifies that either the insert or the update affected a row.
With PostgreSQL 9.1 this can be achieved using a writeable CTE (common table expression):
WITH new_values (id, field1, field2) as (
values
(1, 'A', 'X'),
(2, 'B', 'Y'),
(3, 'C', 'Z')
),
upsert as
(
update mytable m
set field1 = nv.field1,
field2 = nv.field2
FROM new_values nv
WHERE m.id = nv.id
RETURNING m.*
)
INSERT INTO mytable (id, field1, field2)
SELECT id, field1, field2
FROM new_values
WHERE NOT EXISTS (SELECT 1
FROM upsert up
WHERE up.id = new_values.id)
See these blog entries:
Upserting via Writeable CTE
WAITING FOR 9.1 – WRITABLE CTE
WHY IS UPSERT SO COMPLICATED?
Note that this solution does not prevent a unique key violation but it is not vulnerable to lost updates.
See the follow up by Craig Ringer on dba.stackexchange.com
In PostgreSQL 9.5 and newer you can use INSERT ... ON CONFLICT UPDATE.
See the documentation.
A MySQL INSERT ... ON DUPLICATE KEY UPDATE can be directly rephrased to a ON CONFLICT UPDATE. Neither is SQL-standard syntax, they're both database-specific extensions. There are good reasons MERGE wasn't used for this, a new syntax wasn't created just for fun. (MySQL's syntax also has issues that mean it wasn't adopted directly).
e.g. given setup:
CREATE TABLE tablename (a integer primary key, b integer, c integer);
INSERT INTO tablename (a, b, c) values (1, 2, 3);
the MySQL query:
INSERT INTO tablename (a,b,c) VALUES (1,2,3)
ON DUPLICATE KEY UPDATE c=c+1;
becomes:
INSERT INTO tablename (a, b, c) values (1, 2, 10)
ON CONFLICT (a) DO UPDATE SET c = tablename.c + 1;
Differences:
You must specify the column name (or unique constraint name) to use for the uniqueness check. That's the ON CONFLICT (columnname) DO
The keyword SET must be used, as if this was a normal UPDATE statement
It has some nice features too:
You can have a WHERE clause on your UPDATE (letting you effectively turn ON CONFLICT UPDATE into ON CONFLICT IGNORE for certain values)
The proposed-for-insertion values are available as the row-variable EXCLUDED, which has the same structure as the target table. You can get the original values in the table by using the table name. So in this case EXCLUDED.c will be 10 (because that's what we tried to insert) and "table".c will be 3 because that's the current value in the table. You can use either or both in the SET expressions and WHERE clause.
For background on upsert see How to UPSERT (MERGE, INSERT ... ON DUPLICATE UPDATE) in PostgreSQL?
I was looking for the same thing when I came here, but the lack of a generic "upsert" function botherd me a bit so I thought you could just pass the update and insert sql as arguments on that function form the manual
that would look like this:
CREATE FUNCTION upsert (sql_update TEXT, sql_insert TEXT)
RETURNS VOID
LANGUAGE plpgsql
AS $$
BEGIN
LOOP
-- first try to update
EXECUTE sql_update;
-- check if the row is found
IF FOUND THEN
RETURN;
END IF;
-- not found so insert the row
BEGIN
EXECUTE sql_insert;
RETURN;
EXCEPTION WHEN unique_violation THEN
-- do nothing and loop
END;
END LOOP;
END;
$$;
and perhaps to do what you initially wanted to do, batch "upsert", you could use Tcl to split the sql_update and loop the individual updates, the preformance hit will be very small see http://archives.postgresql.org/pgsql-performance/2006-04/msg00557.php
the highest cost is executing the query from your code, on the database side the execution cost is much smaller
There is no simple command to do it.
The most correct approach is to use function, like the one from docs.
Another solution (although not that safe) is to do update with returning, check which rows were updates, and insert the rest of them
Something along the lines of:
update table
set column = x.column
from (values (1,'aa'),(2,'bb'),(3,'cc')) as x (id, column)
where table.id = x.id
returning id;
assuming id:2 was returned:
insert into table (id, column) values (1, 'aa'), (3, 'cc');
Of course it will bail out sooner or later (in concurrent environment), as there is clear race condition in here, but usually it will work.
Here's a longer and more comprehensive article on the topic.
I use this function merge
CREATE OR REPLACE FUNCTION merge_tabla(key INT, data TEXT)
RETURNS void AS
$BODY$
BEGIN
IF EXISTS(SELECT a FROM tabla WHERE a = key)
THEN
UPDATE tabla SET b = data WHERE a = key;
RETURN;
ELSE
INSERT INTO tabla(a,b) VALUES (key, data);
RETURN;
END IF;
END;
$BODY$
LANGUAGE plpgsql
Personally, I've set up a "rule" attached to the insert statement. Say you had a "dns" table that recorded dns hits per customer on a per-time basis:
CREATE TABLE dns (
"time" timestamp without time zone NOT NULL,
customer_id integer NOT NULL,
hits integer
);
You wanted to be able to re-insert rows with updated values, or create them if they didn't exist already. Keyed on the customer_id and the time. Something like this:
CREATE RULE replace_dns AS
ON INSERT TO dns
WHERE (EXISTS (SELECT 1 FROM dns WHERE ((dns."time" = new."time")
AND (dns.customer_id = new.customer_id))))
DO INSTEAD UPDATE dns
SET hits = new.hits
WHERE ((dns."time" = new."time") AND (dns.customer_id = new.customer_id));
Update: This has the potential to fail if simultaneous inserts are happening, as it will generate unique_violation exceptions. However, the non-terminated transaction will continue and succeed, and you just need to repeat the terminated transaction.
However, if there are tons of inserts happening all the time, you will want to put a table lock around the insert statements: SHARE ROW EXCLUSIVE locking will prevent any operations that could insert, delete or update rows in your target table. However, updates that do not update the unique key are safe, so if you no operation will do this, use advisory locks instead.
Also, the COPY command does not use RULES, so if you're inserting with COPY, you'll need to use triggers instead.
Similar to most-liked answer, but works slightly faster:
WITH upsert AS (UPDATE spider_count SET tally=1 WHERE date='today' RETURNING *)
INSERT INTO spider_count (spider, tally) SELECT 'Googlebot', 1 WHERE NOT EXISTS (SELECT * FROM upsert)
(source: http://www.the-art-of-web.com/sql/upsert/)
I custom "upsert" function above, if you want to INSERT AND REPLACE :
`
CREATE OR REPLACE FUNCTION upsert(sql_insert text, sql_update text)
RETURNS void AS
$BODY$
BEGIN
-- first try to insert and after to update. Note : insert has pk and update not...
EXECUTE sql_insert;
RETURN;
EXCEPTION WHEN unique_violation THEN
EXECUTE sql_update;
IF FOUND THEN
RETURN;
END IF;
END;
$BODY$
LANGUAGE plpgsql VOLATILE
COST 100;
ALTER FUNCTION upsert(text, text)
OWNER TO postgres;`
And after to execute, do something like this :
SELECT upsert($$INSERT INTO ...$$,$$UPDATE... $$)
Is important to put double dollar-comma to avoid compiler errors
check the speed...
According the PostgreSQL documentation of the INSERT statement, handling the ON DUPLICATE KEY case is not supported. That part of the syntax is a proprietary MySQL extension.
I have the same issue for managing account settings as name value pairs.
The design criteria is that different clients could have different settings sets.
My solution, similar to JWP is to bulk erase and replace, generating the merge record within your application.
This is pretty bulletproof, platform independent and since there are never more than about 20 settings per client, this is only 3 fairly low load db calls - probably the fastest method.
The alternative of updating individual rows - checking for exceptions then inserting - or some combination of is hideous code, slow and often breaks because (as mentioned above) non standard SQL exception handling changing from db to db - or even release to release.
#This is pseudo-code - within the application:
BEGIN TRANSACTION - get transaction lock
SELECT all current name value pairs where id = $id into a hash record
create a merge record from the current and update record
(set intersection where shared keys in new win, and empty values in new are deleted).
DELETE all name value pairs where id = $id
COPY/INSERT merged records
END TRANSACTION
CREATE OR REPLACE FUNCTION save_user(_id integer, _name character varying)
RETURNS boolean AS
$BODY$
BEGIN
UPDATE users SET name = _name WHERE id = _id;
IF FOUND THEN
RETURN true;
END IF;
BEGIN
INSERT INTO users (id, name) VALUES (_id, _name);
EXCEPTION WHEN OTHERS THEN
UPDATE users SET name = _name WHERE id = _id;
END;
RETURN TRUE;
END;
$BODY$
LANGUAGE plpgsql VOLATILE STRICT
For merging small sets, using the above function is fine. However, if you are merging large amounts of data, I'd suggest looking into http://mbk.projects.postgresql.org
The current best practice that I'm aware of is:
COPY new/updated data into temp table (sure, or you can do INSERT if the cost is ok)
Acquire Lock [optional] (advisory is preferable to table locks, IMO)
Merge. (the fun part)
UPDATE will return the number of modified rows. If you use JDBC (Java), you can then check this value against 0 and, if no rows have been affected, fire INSERT instead. If you use some other programming language, maybe the number of the modified rows still can be obtained, check documentation.
This may not be as elegant but you have much simpler SQL that is more trivial to use from the calling code. Differently, if you write the ten line script in PL/PSQL, you probably should have a unit test of one or another kind just for it alone.
Edit: This does not work as expected. Unlike the accepted answer, this produces unique key violations when two processes repeatedly call upsert_foo concurrently.
Eureka! I figured out a way to do it in one query: use UPDATE ... RETURNING to test if any rows were affected:
CREATE TABLE foo (k INT PRIMARY KEY, v TEXT);
CREATE FUNCTION update_foo(k INT, v TEXT)
RETURNS SETOF INT AS $$
UPDATE foo SET v = $2 WHERE k = $1 RETURNING $1
$$ LANGUAGE sql;
CREATE FUNCTION upsert_foo(k INT, v TEXT)
RETURNS VOID AS $$
INSERT INTO foo
SELECT $1, $2
WHERE NOT EXISTS (SELECT update_foo($1, $2))
$$ LANGUAGE sql;
The UPDATE has to be done in a separate procedure because, unfortunately, this is a syntax error:
... WHERE NOT EXISTS (UPDATE ...)
Now it works as desired:
SELECT upsert_foo(1, 'hi');
SELECT upsert_foo(1, 'bye');
SELECT upsert_foo(3, 'hi');
SELECT upsert_foo(3, 'bye');
PostgreSQL >= v15
Big news on this topic as in PostgreSQL v15, it is possible to use MERGE command. In fact, this long awaited feature was listed the first of the improvements of the v15 release.
This is similar to INSERT ... ON CONFLICT but more batch-oriented. It has a powerful WHEN MATCHED vs WHEN NOT MATCHED structure that gives the ability to INSERT, UPDATE or DELETE on such conditions.
It not only eases bulk changes, but it even adds more control that tradition UPSERT and INSERT ... ON CONFLICT
Take a look at this very complete sample from official page:
MERGE INTO wines w
USING wine_stock_changes s
ON s.winename = w.winename
WHEN NOT MATCHED AND s.stock_delta > 0 THEN
INSERT VALUES(s.winename, s.stock_delta)
WHEN MATCHED AND w.stock + s.stock_delta > 0 THEN
UPDATE SET stock = w.stock + s.stock_delta
WHEN MATCHED THEN
DELETE;
PostgreSQL v9, v10, v11, v12, v13, v14
If version is under v15 and over v9.5 , probably best choice is to use UPSERT syntax, with ON CONFLICT clause
Here is the example how to do upsert with params and without special sql constructions
if you have special condition (sometimes you can't use 'on conflict' because you can't create constraint)
WITH upd AS
(
update view_layer set metadata=:metadata where layer_id = :layer_id and view_id = :view_id returning id
)
insert into view_layer (layer_id, view_id, metadata)
(select :layer_id layer_id, :view_id view_id, :metadata metadata FROM view_layer l
where NOT EXISTS(select id FROM upd WHERE id IS NOT NULL) limit 1)
returning id
maybe it will be helpful
Some SQL servers have a feature where INSERT is skipped if it would violate a primary/unique key constraint. For instance, MySQL has INSERT IGNORE.
What's the best way to emulate INSERT IGNORE and ON DUPLICATE KEY UPDATE with PostgreSQL?
With PostgreSQL 9.5, this is now native functionality (like MySQL has had for several years):
INSERT ... ON CONFLICT DO NOTHING/UPDATE ("UPSERT")
9.5 brings support for "UPSERT" operations.
INSERT is extended to accept an ON CONFLICT DO UPDATE/IGNORE clause. This clause specifies an alternative action to take in the event of a would-be duplicate violation.
...
Further example of new syntax:
INSERT INTO user_logins (username, logins)
VALUES ('Naomi',1),('James',1)
ON CONFLICT (username)
DO UPDATE SET logins = user_logins.logins + EXCLUDED.logins;
Edit: in case you missed warren's answer, PG9.5 now has this natively; time to upgrade!
Building on Bill Karwin's answer, to spell out what a rule based approach would look like (transferring from another schema in the same DB, and with a multi-column primary key):
CREATE RULE "my_table_on_duplicate_ignore" AS ON INSERT TO "my_table"
WHERE EXISTS(SELECT 1 FROM my_table
WHERE (pk_col_1, pk_col_2)=(NEW.pk_col_1, NEW.pk_col_2))
DO INSTEAD NOTHING;
INSERT INTO my_table SELECT * FROM another_schema.my_table WHERE some_cond;
DROP RULE "my_table_on_duplicate_ignore" ON "my_table";
Note: The rule applies to all INSERT operations until the rule is dropped, so not quite ad hoc.
For those of you that have Postgres 9.5 or higher, the new ON CONFLICT DO NOTHING syntax should work:
INSERT INTO target_table (field_one, field_two, field_three )
SELECT field_one, field_two, field_three
FROM source_table
ON CONFLICT (field_one) DO NOTHING;
For those of us who have an earlier version, this right join will work instead:
INSERT INTO target_table (field_one, field_two, field_three )
SELECT source_table.field_one, source_table.field_two, source_table.field_three
FROM source_table
LEFT JOIN target_table ON source_table.field_one = target_table.field_one
WHERE target_table.field_one IS NULL;
Try to do an UPDATE. If it doesn't modify any row that means it didn't exist, so do an insert. Obviously, you do this inside a transaction.
You can of course wrap this in a function if you don't want to put the extra code on the client side. You also need a loop for the very rare race condition in that thinking.
There's an example of this in the documentation: http://www.postgresql.org/docs/9.3/static/plpgsql-control-structures.html, example 40-2 right at the bottom.
That's usually the easiest way. You can do some magic with rules, but it's likely going to be a lot messier. I'd recommend the wrap-in-function approach over that any day.
This works for single row, or few row, values. If you're dealing with large amounts of rows for example from a subquery, you're best of splitting it into two queries, one for INSERT and one for UPDATE (as an appropriate join/subselect of course - no need to write your main filter twice)
To get the insert ignore logic you can do something like below. I found simply inserting from a select statement of literal values worked best, then you can mask out the duplicate keys with a NOT EXISTS clause. To get the update on duplicate logic I suspect a pl/pgsql loop would be necessary.
INSERT INTO manager.vin_manufacturer
(SELECT * FROM( VALUES
('935',' Citroën Brazil','Citroën'),
('ABC', 'Toyota', 'Toyota'),
('ZOM',' OM','OM')
) as tmp (vin_manufacturer_id, manufacturer_desc, make_desc)
WHERE NOT EXISTS (
--ignore anything that has already been inserted
SELECT 1 FROM manager.vin_manufacturer m where m.vin_manufacturer_id = tmp.vin_manufacturer_id)
)
INSERT INTO mytable(col1,col2)
SELECT 'val1','val2'
WHERE NOT EXISTS (SELECT 1 FROM mytable WHERE col1='val1')
As #hanmari mentioned in his comment. when inserting into a postgres tables, the on conflict (..) do nothing is the best code to use for not inserting duplicate data.:
query = "INSERT INTO db_table_name(column_name)
VALUES(%s) ON CONFLICT (column_name) DO NOTHING;"
The ON CONFLICT line of code will allow the insert statement to still insert rows of data. The query and values code is an example of inserted date from a Excel into a postgres db table.
I have constraints added to a postgres table I use to make sure the ID field is unique. Instead of running a delete on rows of data that is the same, I add a line of sql code that renumbers the ID column starting at 1.
Example:
q = 'ALTER id_column serial RESTART WITH 1'
If my data has an ID field, I do not use this as the primary ID/serial ID, I create a ID column and I set it to serial.
I hope this information is helpful to everyone.
*I have no college degree in software development/coding. Everything I know in coding, I study on my own.
Looks like PostgreSQL supports a schema object called a rule.
http://www.postgresql.org/docs/current/static/rules-update.html
You could create a rule ON INSERT for a given table, making it do NOTHING if a row exists with the given primary key value, or else making it do an UPDATE instead of the INSERT if a row exists with the given primary key value.
I haven't tried this myself, so I can't speak from experience or offer an example.
This solution avoids using rules:
BEGIN
INSERT INTO tableA (unique_column,c2,c3) VALUES (1,2,3);
EXCEPTION
WHEN unique_violation THEN
UPDATE tableA SET c2 = 2, c3 = 3 WHERE unique_column = 1;
END;
but it has a performance drawback (see PostgreSQL.org):
A block containing an EXCEPTION clause is significantly more expensive
to enter and exit than a block without one. Therefore, don't use
EXCEPTION without need.
On bulk, you can always delete the row before the insert. A deletion of a row that doesn't exist doesn't cause an error, so its safely skipped.
For data import scripts, to replace "IF NOT EXISTS", in a way, there's a slightly awkward formulation that nevertheless works:
DO
$do$
BEGIN
PERFORM id
FROM whatever_table;
IF NOT FOUND THEN
-- INSERT stuff
END IF;
END
$do$;