I'm trying to migrate to Dart 2, I have a lot of packages and up to now I could do my job with not so much problems.
Now I'm getting a strange error bot with DDC and dart2js:
[SEVERE] build_web_compilers|entrypoint on web/main.dart (cached):
Unable to find modules for some sources, this is usually the result of either a
bad import, a missing dependency in a package (or possibly a dev_dependency
needs to move to a real dependency), or a build failure (if importing a
generated file).
Please check the following imports:
`import 'package:ledger_web/src/ui/components/main_selection_bar.template.dart';` from ledger_web|lib/src/ui/components/service/main_selection_bar_service.dart at 7:1
`import 'package:ledger_web/src/ui/components/main_selection_bar.template.dart';` from ledger_web|lib/src/ui/components/service/main_selection_bar_service.template.dart at 11:1
... and more
It is correct to signal that there is not the import (MainSelectionBar is an angular component), because the template has not been generated.
Now the problem is, why the template is not there?
I checked the .dart_tool/build/generated directory but the template has not been created.
I have a similar package with a similar component that works fine, so I cannot figure out what's happened.
Is there a place where there is a more detailed error list?
Interestingly enough, there is also a case in which the template exists, but it is listed like if it was not found....
Any hint?
Most likely this is related to a build failure when generating the template, which is not being properly reported on subsequent builds. This pull request should help that https://github.com/dart-lang/build/pull/1834/, but you can also try running pub run build_runner clean and then doing a new build to get the original error back.
Related
I'm converting a project that was built using Create React App to use ParcelJS as a bundler instead. Strangely, a dependency that I imported during development (#twilio/voice-sdk) works fine in the CRA version of the application, but I get the following error when I try to invoke the constructor in the Parcel version:
TypeError: (this._options.AudioHelper || audiohelper_1.default) is not a constructor
The package is identical between both (#v2.1.1, the latest). I'm importing using ESM syntax, so:
import { Device } from '#twilio/voice-sdk'
I trying using CommonJS syntax (require) and it still didn't work. I've dug into the compiled code, and that seems to be the issue. I imagine there are a lot of differences, but one that I've noticed is here:
On the left is the code compiled by Create React App, which does seem to be exporting something more substantial than on the left - is the export just an empty object? If so, it's no wonder I'm getting a constructor error.
Unfortunately, no amount of googling and SO sleuthing has clarified what I could do to make ParcelJS transpile this dependency properly, if that's the issue. I've tried to make the babel config for ParcelJS match CRA more closely by adding the following to a babel.config.json
{
"plugins": [
"#babel/plugin-transform-modules-commonjs"
]
}
But no luck. Any ideas from where to go from here, or is it time to switch to Webpack?
It looks like Twilio package has a problem when using Parcel 2: https://github.com/twilio/twilio-voice.js/issues/101
Say I develop a package with a limited set of dependencies (for example, LinearAlgebra).
In the Unit testing part, I might need additional dependencies (for instance, CSV to load a file). I can configure that in the Project.toml all good.
Now from there and in VS Code, how can I debug the Unit tests? I tried running the "runtests.jl" in the debugger; however, it unsurprisingly complains that the CSV package is unavailable.
I could add the CSV package (as a temporary solution), but I would prefer that the debugger run with the configuration for the unit testing; how can I achieve that?
As requested, here is how it can be reproduced (it is not quite minimal, but instead I used a commonly used package as it give confidence the package is not the problem). We will use DataFrames and try to execute the debugger for its unit tests.
Make a local version of DataFrames for the purpose of developing a feature in it. I execute dev DataFrames in a new REPL.
Select the correct environment (in .julia/dev/DataFrames) through the VS-code user interface.
Execute the "proper" unit testing by executing test DataFrames at the pkg prompt. Everything should go smoothly.
Try to execute the tests directly (open the runtests.jl and use the "Run" button in vs-code). I see some errors of the type:
LoadError: ArgumentError: Package CategoricalArrays not found in current path:
- Run `import Pkg; Pkg.add("CategoricalArrays")` to install the CategoricalArrays package.
which is consistent with CategoricalArrays being present in the [extras] section of the Project.toml but not present in the [deps].
Finally, instead of the "Run" command, execute the "Run and Debug". I encounter similar errors here is the first one:
Test Summary: | Pass Total
merge | 19 19
PASSED: index.jl
FAILED: dataframe.jl
LoadError: ArgumentError: Package DataStructures not found in current path:
- Run `import Pkg; Pkg.add("DataStructures")` to install the DataStructures package.
So I can't debug the code after the part requiring the extras packages.
After all that I delete this package with the command free DataFrames at the pkg prompt.
I see the same behavior in my package.
I'm not certain I understand your question, but I think you might be looking for the TestEnv package. It allows you to activate a temporary environment containing the [extras] dependencies. The discourse announcement contains a good description of the use cases.
Your runtest.jl file should contain all necessary imports to run tests.
Hence you are expected to have in your runtests.jl file lines such as:
using YourPackageName
using CSV
# the lines with tests now go here.
This is a standard in Julia package layout. For an example have a look at any mature Julia such as DataFrames.jl (https://github.com/JuliaData/DataFrames.jl/blob/main/test/runtests.jl).
I have 2 issues that only appear when executing flutter build web.
Sometimes flutter build web fails complaining (wrongly) about types that were not compatible (see below).
Sometimes the build process finishes but then the web app doesn't work: doesn't display anything and there are no messages in the console.
The error I mention is something like this:
% flutter build web
Target dart2js failed: Exception: lib/main.dart:24:31:
Error: A value of type 'ApiUsersRepository' can't be assigned to a variable of type 'UsersRepository'.
- 'ApiUsersRepository' is from 'package:my_app/api_users_repo.dart' ('lib/api_users_repo.dart').
- 'UsersRepository' is from 'lib/users_repo.dart'.
final UsersRepository usersRepository = ApiUsersRepository();
^
Error: Compilation failed.
The app is working in iOS and web when developing.
The solution
I changed all imports of my files like:
import 'package:my_app/users_repo.dart';
To:
import 'users_repo.dart';
More Details
Investigating the error about types, I found this issue, where the important part is this comment: after changing every import to relative format it resolves my problem.
So I did that, and it solved the 2 issues, the compilation error, and the runtime error.
for me I had to remove a package that was corrupted. c:\src\flutter.pub-cache\hosted\pub.dartlang.org\localstorage-4.0.0+1 Apparently, a file had become corrupted by me invertly. I removed the package and did a flutter pub get then recompiled and it worked.
I'm trying to follow the Angular Dart tutorial (https://webdev.dartlang.org/angular/tutorial/toh-pt1) but got stuck after adding some html that makes use of the ngModel directive.
According to the tutorial in order to make use of the ngModel directive one has to add "angular_forms: ^2.0.0" to the pubspec.yaml, import 'package:angular_forms/angular_forms.dart' and add "formDirectives" to the component directives. I did all of that including running "pub get" to get the dependencies but when I run "webdev serve" I get the following error:
[SEVERE] build_web_compilers|entrypoint on test/app_test.dart (cached):
Unable to find modules for some sources, this is usually the result of either a
bad import, a missing dependency in a package (or possibly a dev_dependency
needs to move to a real dependency), or a build failure (if importing a
generated file).
What am I missing?
I had the same the problem. I don't think it mentions explicityly in the tute but after adding angular_forms dependency to the pubspec.yaml file, you need to pull in this new dependency with:
pub get
Hope it helps!
I managed to get a couple of EAK/grunt based Ember apps upgraded to 1.11 with HTMLBars, and then got them migrated to Ember CLI/Brocolli. The unit tests were setup for karma test runner so I'm looking at how to get those running in the CLI projects now, but I didn't write the tests and really have no experience with unit testing javascript modules.
Searching around the iNet, I can see that others have also used karma becasue of its coverage output and are trying to get it to work with Ember CLI, but that Ember Core isn't supporting it, though they say anyone should be able to get it set up with a custom addon. I'm also trying to use the 'testem' runner to see what sticks with that.
The Ember site does have an 'automating tests with runners' page for v1.10, with sections on 'testem' and 'karma', but it doesn't appear for v1.11 so I can't tell from that site what is or isn't relevant. But it seems like I should be able to work out a solution for the karma test runner, so I added the old devDependencies to the project package.json:
"karma": "^0.12.31",
"karma-chai": "~0.1.0",
"karma-chrome-launcher": "~0.1.2",
"karma-coverage": "~0.2.1",
"karma-firefox-launcher": "~0.1.3",
"karma-junit-reporter": "~0.2.1",
"karma-mocha": "~0.1.3",
"karma-phantomjs-launcher": "~0.1.2",
"karma-sinon-chai": "~0.1.5"
I also dropped the old 'karma.conf.js' (along with a few other karma confs) in the project and updated the paths inside (from 'vendor' to 'bower_components'). I did find a 'ember-cli-karma' node mode and installed it, but it seems to just have a 'package.json'. It has no docs and seems like just a stubbed out starter project with no implementation. I also installed 'karma', 'karma-cli' and 'testem' node modules.
The testem docs say to add you src and test files to 'testem.json', but with out examples I don't know what that means; a list of every src and test file? With what path; relative, absolute? Forward slashes, backslashes? preceded with / or ./ or ../? I just left them out because I think the system just finds the src and tests by convention.
When I run 'karma init' I get:
readline.js:529
this.line = this.line.slice(this.cursor);
^
TypeError: Cannot read property 'slice' of undefined
When I run 'testem' I get:
TEST'EM 'SCRIPTS!
Open the URL below in a browser to connect.
http://localhost:7357/aN;0faN;NaNf
...then the project's '../tests/index.html' loads in a browser, but is not able to 'find' any of the asset files (css, js) so nothing executes or renders correctly. I just see template expressions ({{content-for 'head'}}, etc).
When I run 'ember test' I get:
Building...BuildingBuilding.Building..Building...Built project successfully.
1..0
# tests 0
# pass 0
# fail 0
# ok
No tests were run, please check whether any errors occurred in the page (ember test --server) and ensure that you have a test launcher (e.g. PhantomJS) enabled.
When I run 'ember test --server' I get:
The test index.html loaded in a browser with a test report. When I uncheck 'hide passed tests' the report indicates '29 passed, 28 failed'. It has 11 sections where a particular test may have 3 problems such as 'could not load', 'failed', 'could not find module', 'attempting to register an unknown factory' or 'died'.
With this, I'm obviously running testem and not karma, so may as well work on getting testem working and figure out karma later. If there were more examples and migration troubleshooting docs I might have a systematic way to work through some of these problems.
I ran into "No tests were run,..." problem recently after a node upgrade. I fixed it with a:
npm install -g phantomjs
This provides some additional options as well:
https://github.com/ember-cli/ember-cli/issues/3969
I had the Cannot read property 'slice' of undefined error on MS Windows, running via MSys2. I have solved it by using karma init from an ordinary cmd prompt.