Quite new to this but the following code worked fine once but now throws the service error: spreadsheets message. Can't work out why, please help :-)
function duplicatetemplate() {
var ss = SpreadsheetApp.getActiveSpreadsheet();
var NameRange = ss.getRangeByName("data");
var Names = NameRange.getValues();
for (var i=0; i < Names.length; i++) {
ss.getSheetByName('Template T T')
.copyTo(ss).setName(Names[i]);
}
return;
}
The entries in the data range are unique.
I'm tearing my hair out!! Thanks in advance
Related
I am trying to trace email status with using inline image in an email.
For getting response i am using following code.
// handles the get request to the server
function doGet(e) {
Logger.log(e.parameter);
var method = e.parameter['method'];
switch (method) {
case 'track':
var email = e.parameter['email'];
updateEmailStatus(email);
default:
break;
}
}
function updateEmailStatus(emailToTrack) {
// get the active spreadsheet and data in it
var id = SpreadsheetApp.getActiveSpreadsheet().getId();
var sheet = SpreadsheetApp.openById(id).getActiveSheet();
var data = sheet.getDataRange().getValues();
// get headers
var headers = data[0];
var emailOpened = headers.indexOf('status') + 1;
// declare the variable for the correct row number
var currentRow = 2;
// iterate through the data, starting at index 1
for (var i = 1; i < data.length; i++) {
var row = data[i];
var email = row[0];
if (emailToTrack === email) {
// update the value in sheet
sheet.getRange(currentRow, emailOpened).setValue('opened');
break;
}
currentRow++;
}
}
Here is the sheet
it works in a stand alone file but not working in a addon script project. Is there any way to trace out the send email using apps script ?
Any help on this issue will be highly appreciated. Thank you
I have solved the issue. I have change the code little bit and create a new draft as more than one inline image was added to the existing draft.
The change is here
var ss = SpreadsheetApp.getActiveSpreadsheet();
var sheet = ss.getSheetByName('Email_Status');
After this few changes i deployed as new webapp and it started working. Thank you for contribution
Try this:
//var id = SpreadsheetApp.getActiveSpreadsheet().getId(); remove this
var sheet = SpreadsheetApp.openById(id);//change this by hardcoding the id
I wrote the code to update my table (SecurityQuestionAnswer) with new security password questions and move to old questions to another table (SecurityQuestionAnswersArchives). Total no of security questions is 3. I am able to update the current table, but when I add the same rows to history table, it shows weird data: only two records are added instead of 3 and the data is also duplicated. My code is as follows:
if (oldQuestions.Any())
{
var oldquestionstoarchivelist = new List<SecurityQuestionAnswersArchives>();
var oldquestionstoarchive =new SecurityQuestionAnswersArchives();
for (int i = 0; i < 3; i++)
{
oldquestionstoarchive.Id = oldQuestions[i].Id;
oldquestionstoarchive.SecurityQuestionId = oldQuestions[i].SecurityQuestionId;
oldquestionstoarchive.Answer = oldQuestions[i].Answer;
oldquestionstoarchive.UpdateDate = oldQuestions[i].UpdateDate;
oldquestionstoarchive.IpAddress = oldQuestions[i].IpAddress;
oldquestionstoarchive.SecurityQuestion = oldQuestions[i].SecurityQuestion;
oldquestionstoarchive.User = oldQuestions[i].User;
oldquestionstoarchivelist.Add(oldquestionstoarchive);
}
user.SecurityQuestionAnswersArchives = oldquestionstoarchivelist;
//await Store.UpdateAsync(user);
_dbContext.ArchiveSecurityQuestionAnswers.AddRange(oldquestionstoarchivelist);
_dbContext.SecurityQuestionAnswers.RemoveRange(oldQuestions);
await _dbContext.SaveChangesAsync();
oldquestionstoarchivelist.Clear();
}
UPDATE 1
The loop looks fine, It iterates three times(0,1,2), which is expected. First issue is with AddRange function to which I was passing a list , but it takes an IEnumerable input, I rectified it using following code.
IEnumerable<SecurityQuestionAnswersArchives> finalArchiveses = oldquestionstoarchivelist;
_dbContext.ArchiveSecurityQuestionAnswers.AddRange(finalArchiveses);
The other issue is duplicate data , which I am unable to figure out where the issue is. Please help me in finding this out.
Your help is much appreciated !
Got it ! Just sharing in case anybody has same issue.
The problem was with initialization at wrong place. I moved
var oldquestionstoarchive =new SecurityQuestionAnswersArchives();
in side the Forloop, now the variable will hold the unique values over each iteration.
var oldquestionstoarchivelist = new List<SecurityQuestionAnswersArchives>();
for (int i = 0; i < 3; i++)
{
var oldquestionstoarchive = new SecurityQuestionAnswersArchives();
oldquestionstoarchive.SecurityQuestionId = oldQuestions[i].SecurityQuestionId;
oldquestionstoarchive.Answer = oldQuestions[i].Answer;
oldquestionstoarchive.UpdateDate = oldQuestions[i].UpdateDate;
oldquestionstoarchive.IpAddress = oldQuestions[i].IpAddress;
oldquestionstoarchive.SecurityQuestion = oldQuestions[i].SecurityQuestion;
oldquestionstoarchive.User = oldQuestions[i].User;
oldquestionstoarchivelist.Add(oldquestionstoarchive);
}
Hi im trying to export the Emailadresses from the senders in a label in Gmail Called "Suarez". But it's just running and never completing, it should be about 372 emails. Is it to much to print to the logger?
Here is what im trying:
function getEmailsadresses(){
var threads = GmailApp.search("in:suarez");
for (var i = 0; i < threads.length; i++) {
var messages = threads[i].getMessages();
for (var m = 0; m < messages.length; m++) {
var msg = messages[m].getFrom();
}
}
Logger.log(msg()); // log from address of the message
}
I use a script embedded in an spreadsheet the reads every messages in every threads in a Label that could probably be a good starting point for you.
My specific use case was to log SMS messages that my android phone sends me as emails each time I send or receive a text message.
So it will work for you by just changing the label name and maybe remove the data filtering I added on the message. Since I have a lot of data I set up a time trigger task manager to works in small bunches to avoid exceeding time limit.
Usage is simple : run the "startSMSLog" and go have a couple of coffees until the cell A1 in the spreadsheet stops being RED... that's it.
Code below : the start function
function startSMSLog(){
var triggerID = ScriptApp.newTrigger('countSMSLogEmails').timeBased().everyMinutes(5).create().getUniqueId();
var thisTrigger = PropertiesService.getScriptProperties().setProperty('thisTriggerSMS',triggerID);
PropertiesService.getScriptProperties().setProperty('current thread SMS',0);
var sh = SpreadsheetApp.getActive().getSheetByName('SMS'); // change to the name of your sheet
sh.getRange('A1').setBackground('red');
countSMSLogEmails(true);
}
and the "working" code :
function countSMSLogEmails(clearSheet){
var sh = SpreadsheetApp.getActive().getSheetByName('SMS');
var start = Number(PropertiesService.getScriptProperties().getProperty('current thread SMS'));
var CallLogThreads = GmailApp.getUserLabelByName('SMS').getThreads(start,10);
if(CallLogThreads.length==0){
sh.sort(2,false);
sh.getRange('A1').setBackground('#FFC');
var triggers = ScriptApp.getProjectTriggers();
var thisTrigger = PropertiesService.getScriptProperties().getProperty('thisTriggerSMS');
for(var n in triggers){
if(triggers[n].getUniqueId()==thisTrigger){ScriptApp.deleteTrigger(triggers[n])};
}
sh.getRange('A1').setValue('Subject (Log on '+Utilities.formatDate(new Date(), Session.getScriptTimeZone(), "dd-MMM-yy HH:mm")+')');
return;
} else {
PropertiesService.getScriptProperties().setProperty('current thread SMS',start+CallLogThreads.length);
}
var data = [];
for(var n=0;n<CallLogThreads.length;n++){
var thread = CallLogThreads[n];
Logger.log('thread message count = '+thread.getMessageCount());
var msg = thread.getMessages();
var msgData = [];
for(var m in msg){
var msgDate = msg[m].getDate();
var msgSubject = msg[m].getSubject();
var msgBody = msg[m].getBody().replace(/[\n\r]/g,' ').replace(/'/g,"'").replace(/ /g,"!").replace(/&/g,"&").replace(/"/g,'"')
.replace(/>/g,'>').replace(/</g,'<').replace(/<br \/>/g,'\n').replace(/<br>/g,'\n');
msgData.push([msgSubject,msgDate,msgBody]);
}
data.push(msgData);
}
var dataTotal = [];
if (clearSheet==true) {
dataTotal.push(['subject', 'date', 'message']);
}
for(var n in data){
dataTotal = dataTotal.concat(data[n]);
};
Logger.log(JSON.stringify(dataTotal));
if (clearSheet==true) {
sh.clearContents();
sh.getRange(1,1,dataTotal.length,dataTotal[0].length).setValues(dataTotal);
}else{
sh.getRange(sh.getLastRow()+1,1,dataTotal.length,dataTotal[0].length).setValues(dataTotal);
}
}
I would like to know how can I get the data from mongodb in Template.templatename.rendered function. I tried click event on other template and it's all working fine and return the results i wanted. But what I need is to rendered the chart on load. But I could not get any data from the mongodb.
//poll.js
var drawPollChart = function(){
//returns data on other template methods except for
//Template.templatename.rendered
var dist = getDistinctQuestionId();
alert('dist:'+dist);
var data_x =[];
for(var i=0; i< 1; i++)
{
var count = getDataCount(dist[i]);
var uniq = getDistinctResponseBucket(dist[i]);
for(var j=0; j<uniq.length; j++)
{
//alert('data:' + count[uniq[j]] + ", label:" + uniq[j]);
data_x.push({
data : count[uniq[j]],
label: uniq[j]
});
}
}
Template.pollChart.rendered = function() {
//can't draw a thing cause can't get any data from mongodb
drawPollChart();
};
Help please? Thanks in advance.
Just because the template is rendered doesn't mean the DB is connected.
Use Meteor.status().status to detect the state of the connection. For example you could wait to render the pollChart-template at all until Meteor.status().status === 'connected'.
I've been trying to whip up a quick google script to count rsvps for the invite response spreadsheet for a wedding. The script worked perfectly for a week as new entries were added to the spreadsheet, then suddenly stopped working with the following error message in each cell:
Error: Service Times Out: Apps Script
The script itself is simple. It queries the relevant column (there are multiple events) and then checks to see whether there is some response spefied by the user - "YES", "NO", or a blank, typically.
What does this error mean, and does anyone have any suggestions for fixes?
function sumRSVP(response, rsvpType) {
var rsvpCol = 7;
if (rsvpType == "rehearsal") rsvpCol = 8;
if (rsvpType == "brunch") rsvpCol = 9;
var mySum = 0;
var sh = SpreadsheetApp.getActiveSheet();
for( i=2; i<177; i++){
var rsvp = sh.getRange(i, rsvpCol).getValue();
var nguests = sh.getRange(i, 6).getValue();
if(nguests != "" && rsvp == response){
mySum = mySum + parseFloat(nguests);
}
}
return mySum;
}
Hopefully the wedding went well. This was asked some time ago but has been viewed over 300 times at this post and I believe is important:
Data should not be extracted from a spreadsheet in a loop. The data needed should be extracted in a batch to an array and the array evaluated in the loop.
See docs reference at:
https://developers.google.com/apps-script/guide_common_tasks#OptimizeScripts
You can write scripts to take maximum advantage of the built-in caching, by minimizing the number of reads and writes. Alternating read and write commands is slow. To speed up a script, read all data into an array with one command, perform any operations on the data in the array, and write the data out with one command.
function sumRSVP(response, rsvpType) {
var rsvpCol = 7;
if (rsvpType == "rehearsal") rsvpCol = 8;
if (rsvpType == "brunch") rsvpCol = 9;
var mySum = 0;
var sh = SpreadsheetApp.getActiveSheet();
// start at row 2 - uses columns 6-9
var data = sh.getRange(2, 6, 177 - 1 , 4).getValues();
for(var i=0; i<data.length; i++){
var rsvp = data[i][rsvpCol - 6];
var nguests = data[i][0];
if(nguests != "" && rsvp == response){
mySum = mySum + parseFloat(nguests);
}
}
return mySum;
}