I am working on a VB6 application and I have requested to change the platinum gray style forms' to our new format.
In order to do that, I have first modified the Backcolorattribute as H8000000E (it was H8000000F previously) for labels, frames and forms.
Those forms were saved with .Dsr extension.
Each form is having three fils with .Dsr, .DCA and .dsx extensions.
After I modified the Backcolor, I compiled the code and it ran successfully. Then I close the project, reopen it and run again.
Then I got the Error in Loading DLL error.
We didn't commit the .DCA files to git. But once I committed one .DCA file and it caused a build failure. But this is occurring without even commit any changes.
I am still unable to find a reason why this occurred.
Could anybody please help me with this?
Thank you.
I removed the .DCA files set and it resolve the problem.
DCA is a temporary type information cache file created by Visual Basic. It is used by VB to speed up compilation.
Related
Good day. I have a third-party VSCode extension that's been throwing an error all day. In order to actually diagnose this, and then submit an issue on the parent GitHub repository, I've been poking around and trying to figure out where the error is being thrown from.
I have a decent idea where the error is originating from, but I'd like to add a console.debug statements to confirm this.
My question is this: I've made changes to the actual VSCode extension source code (installed within the VSCode extensions folder ), but VSCode is not picking up those changes. What do I do? Clean the cache or something, I'm not quite sure.
The source file is basically just a Ts-compiled-to-JS file, so still pretty easy to work with.
I've checked out the Developer Tools Console (Ctrl+Shift+I), but the error stack is not particularly helpful.
Every time I look for a file using the files finder console the file does not show up as a result of the search despite its existence in the project.
At certain point this feature was working but I may have change some configuration in Rubymine involuntary. Any help it's welcome!
That's a known issue already fixed: https://youtrack.jetbrains.com/issue/IDEA-266391
Builds with the fix will be added to that issue so you can follow it.
As a workaround, please try invoking File - Invalidate Caches (still the issue might come back).
The title pretty much says it all, but to make things worse, new files aren't tracked as well. I figured that this is likely a rare exception, but it would be good to know what is causing the issue - in case a large project gets bugged by it. This question might help anyone who gets in this mess, so please post your suggestions.
Here is a screenshot of the situation: http://i.stack.imgur.com/iMn3O.png
Here is the screenshot I posted of the Settings... > Version Control > Ignored Files page: http://i.imgur.com/XwByblX.png It shows what is wrong on the 3rd line.
If you still can't index:
It might be because after removing the ignoring of your files, that the VCS hasn't been brought up to speed of the fact. Go to VCS > Show Changes View and then hit CTRL+F5 or click the Refresh Icon. Now you have Unversioned Files and you're ready to add files to the index.
I have solved the issue with a roundabout way. What I did was: I didn't include the .classpath file that Eclipse creates. IntellIJ asked if I wanted to open .project, I canceled that and just opened the project regularly, that solved it for me. It might have quietly induced the ignore entry from the screenshot.
The file is ignored. You have added your entire project directory to "Ignored files" in Settings | Version Control | Ignored Files, which leads to IntelliJ IDEA not showing any files as unversioned, and not allowing you to add them to Git.
You need to remove the project directory from the Ignored Files list.
I accidentally published Composite C1 from Visual Studio with "Precompile during publishing" when I first set it up and have now come to realize that several plugins do not work with precompile turned on. Unfortunately I have no idea how to reverse this. I've tried several things to no avail. I usually end up with a 500.0 error. If I go to the admin interface everything is working properly, and I can even preview the pages, but from the customer side all I get is a 500.0 error.
Of course I could republish from the Visual Studio project I have, but that project has the default template on it. I've tried copying what appears to be changed on the server to the original project but I end up with a 500 error. I've tried removing all the precompiled stuff on the server but I end up with a 500 error. I'm pretty lost.
At this point I'm willing to do anything. Is there a doc explaining how to copy the content to a newly downloaded copy, kind of like an upgrade doc but "side-grading"? I am using the most current version at the time of writing this 4.2 Update 1
Thank you
Solved use the PackageCreator suggested by wysocki's answer. It was not exactly straight forward to create the package. The errors can very cryptic at times. So here are some of the issues I encountered and how I got past them:
wysocki was correct to suggesting starting with a bare bones installation even though my original project was started with the Venus theme. I tried both ways.
I encountered issues with the MasterLayout and the Page Template Features which are currently not supported by the PackageCreator, although they may be supported in future versions. The solution was to add the missing elements to the fresh C1 project from the original C1 installation in the App_Data/PageTemplates and App_Data/PageTemplateFeatures folders.
A few times I ran into an issue where I added the same page or function twice to the PackageCreator. This was obviously my fault, but it should be mentioned that you can add the same site element twice which throws and error on import. Make sure you are careful to only getting one of each when creating the package to be exported.
If you are getting and error and it uses and Id like "4061397b-ee9e-4512-984d-f2b2d41eb654" I've found that it was very helpful to extract the zip file you are trying to import and then search the extracted folders for that Id. The lines with the Id usually have more information on them that will help you to identify exactly what content page or whatever the error is being generated from.
If you are using installed packages in your project like SimpleSearch for example, make sure you don't add it's functions to the PackageCreator. Install them separately.
I had an issue where I somehow had an element in the Data section that didn't have a "type". The error simply "The type cannot be empty". This was obviously tough to find so I suppose the lesson is, less is more. If you think your project might have a few elements that are unnecessary, don't add them at first and see if the project you import them into complains about missing them. It's much easier to troubleshoot missing elements than it is to figure out which element is causing the issue that you really didn't need.
Is there a doc explaining how to copy the content to a newly downloaded copy
You can try and export content / templates / anything else related to a "package" via Composite.Tools.PackageCreator.
Its latest version gives you quite a lot of flexibility in what you can export ("package") - please its user manual.
Once the package is made and downloaded, you can go on and install it on a new website. If you export / import a lot of content / templates etc, it makes sense to have a "Bare Bones" site as the new one.
All the starter sites like "Neptune", "Venus" are installed as a bunch of packages in specific order during Composite C1's initial setup.
I am having a difficulty while attempting to debug some code in grails. It is difficult to put into text, so I have posted a screencast showing exactly what the problem is here. In short, while I am debugging the debugger starts jumping from place to place and not following the program logic I have in place. The only other similar question I have found is a year old, had no solution, and can be found here.
The best guess I have so far is that the debugger is displaying the text I have typed in, but is actually executing an older version of the class file which it has cached somewhere. Therefore, I tried:
cleaning the project
manually deleting all of the class files from the target folder and from the target-eclipse folder
Searching my entire hdd for additional files with similar names
removing my project from the workspace and re-adding it
closing and reopening the IDE
grails refresh-dependencies
Importing the project into a new IDE (I was using GGTS, I switched to IntelliJ)
None of those solutions had any effect. I realized that the issue was in a .groovy file, and I was writing almost pure Java, so I deleted the .groovy file, and re-created the class in a .java file. That solved my problem. Unfortunately I am having the problem again, and this time it is in a controller that heavily relies on the grails framework, so that solution is not an option. Other than also being in a .groovy file, another similarity is that the code breaks on an if statement.
My next steps:
Verify that the application is not executing the code I see by using print functions to monitor actual execution flow.
comment out the entire function and re-add functionality one line at a time to see if I can see what breaks it.
Delete the .groovy file, and re-create it as another .groovy file.
Any help is appreciated, and since I can't find any answers online I will continue to update this question as I learn more.
See my comment on the jira issue that you raised. You have found a problem with the groovy compiler and how it calculates line numbers. This is not a problem with executing the wrong class files or using a broken debugger. The debugger is doing exactly what it is expected to do. It is the compiler that is providing erroneous line number information.
The next step, as described in the issue, is to provide a simple project that recreates the bug. I tried to do so myself, but could not. So, please supply something that we can work with. Then we can notify the groovy compiler team.