I am trying to use a Virtual Box VM to create a development environment I can share with a few dozen other developers. We are all on an internal network and need to connect to external web sites via proxy server. On the VM (guest) I am putting:
windows 10 64 bit
weblogic server
Several other dev tools
My requirements are:
From the guest OS I need to be able to hit the internet (ie google.com)
From the guest OS I also need to be able to open chrome and hit the server webpages running on the guest OS using mysite.com:8007/index.html.
I have modified the guest OS host file such that 127.0.0.1 maps to mysite.com. Ideally that should mean anything going to mysite.com will get resolved to 127.0.0.1.
Our proxy to reach the internet is http-proxy.mysite.com:80. I am able to connect to the internet (pages like www.google.com) as long as I enable the proxy (http-proxy.mysite.com:80) in chrome proxy settings. However I need to be able to enter mysite.com:8007/index.html in the browser and be able to load the homepage. I am able to hit the server using localhost:8007 but I need mysite.com:8007 to work since authentication cookies wont get passed correctly to localhost:8007 urls.
When I enter mysite.com:8007/index.html in chrome it keeps trying to redirect to the IP address of the host OS 10 . * . * . * and the server is not running on the Host OS.
When I enter 'curl mysite.com:8007/index.html' in a command prompt on the guest OS it actually does prints the correct response from my server (no idea why chrome is different / not respecting the host file config).
Any idea how to configure Virtual Box or chrome such that the external pages as well as the guest server pages work?
For internet access on VM, you need to configure network card as BRIDGE, NAT or NAT NETWORK. In your case NAT NETWORK will be better solution, because this will allow you bo be you VM visible in network, just like your Host.
If you have and Internal network you mus have also another card configured for VM for internal network.
To be your VM accessible from Internal Network via http... the coomputers in network have to setup DNS entry pointing to your VM.
I use an extension called Live Server in Visual Studio Code. When I run live, the browser opens and the url is http://127.0.0.1:5500/index.html. Why can't I open this url on my phone's browser to see the live site on the phone. Is there a way to do this (Live reload on phone and browser)?
Note: I also develop using ionic and when I ionic serve I can see it on browser and when I open the ionic dev app (not ionic view!), I can see the live app on the phone. I can view it on multiple devices with the condition of all devices being in the same network which I am fine with.
127.0.0.1 is a special-purpose IPv4 address reserved for loopback purposes. That is, this IP refers to your computer itself.
By entering http://127.0.0.1:5500/index.html in your browser, you're requesting web page within your computer.
In normal case, your computer will be in a NAT network (under same wi-fi AP for instance), and you'll be assigned with a virtual IP. Normally it's 192.168.x.x.
You may enter the following command in your command prompt to see your IP address.
ipconfig
If you're using Mac or Linux, use this instead.
ifconfig
As a result, under your network interface card, you'll get your IP Address.
If the IP address belongs to virtual IP, then you may access it with your phone using
http://< Your IP Address >:5500/index.html
If it's not virtual IP, it is Public IP. Then, you'll have to configure appropriate Firewall settings under this circumstance.
Hope this will help.
You cannot open the same url on your phone, because that url host (127.0.0.1) refers to the localhost (the same machine).
If your phone and server are on the same network, you can replace the current host with the servers local IP.
So if your servers local IP is: 192.168.0.36
the URL you enter in your phone should be http://192.168.0.36:5500/index.html.
I had a same problem.
Solution: Control Panel -> Windows Defender Firewall -> Allow an app or feature through Windows Defender Firewall -> Allowed "code.exe" app.
Run ipconfig and find your private IP.
Make sure your phone is on the same network.
go to http://192.168.0.***:5500/
Open Live server's settings.json and add these two settings "liveServer.settings.useLocalIp": true and "liveServer.settings.host": "localhost". Then type your localhost ip in your mobile browser (in my case it was 192.168.0.110) with the rest of the Live server URL i.e. 192.168.0.110:5500/index.html. This worked for me.
Let me clear this out for you. we call localhost or 127.0.0.1 as loop backs. which will itself point to the same machine(means that particular service should also be hosted in the same machine). what Microsoft did with visual studio live share is that if have the live share extension it will create a reverse proxy between the host(where the server is hosted) and the target (In this case your browser) which means even though your host is in a different country the extension will tunnel the transparent proxy to your loop-back address. visual studio live share extension is what you phone doesn't have and Microsoft doesn't support yet. If you still want to access your local service what you can do is turn off the firewall(or pass through that particular port where ur service is hosted) and connect your phone to the same network as your machine with the service running and instead using http://127.0.0.1:5500/index.html use http:// UR SERVER IP :5500/index.html you can get UR SERVER IP by giving ipconfig in windows command prompt or ifconfig if ur server is on linux.
I implemented a web service for an Android application. The web service is running on my local host (192.168.1.2). Using the Android emulator I succeeded to connect to web service. The I tried to connect my Android device using debugging mode to web service but it didn't work. So my question is if it is possible to connect an Android device to this web service that is running on my local host (192.168.1.2) without using a real IP ?
It's much simpler way supported by google!
Connect your phone via usb to computer and enable usb debugging
On your computer open Chrome browser and type exactly this address: chrome://inspect/#devices
Now you can link your computer port to your device port by port forwarding button. On my computer I have service on address localhost:61437 and I just linked it to device's 8081 port. Remeber to check 'Enable port forwarding' checkbox
screen from service on my computer ( localhost:61437 )
screen from my mobile browser with the same service ( localhost:8081). And that's it. Also you use this service address in your application
Did you already solve your problem? I also got a problem like you. These are the steps that I already done:
unplug lan cable or turn off any other internet connection from your pc.
connect your android mobile to your pc using usb.
turn on usb tethering
back to your pc. check your ip. mine is 192.168.42.37
check your webservice app in your pc. let's say http://192.168.42.37/webserviceapp
back to your android mobile. try this url http://192.168.42.37/webserviceapp
Now you can access your webservice app in your pc from your mobile phone.
Well your localhost is 127.0.0.1 (or ::1) and your LAN IP is 192.168.1.2. Each pc/device that are connected under your LAN could reach your webservice on IP 192.168.1.2
Your Android device must be so connected under the same LAN maybe through Wifi connection so it will be able to talk with 192.168.1.2.
If you can't connect your Android device under the same LAN eg you have just a 3g connection you need to play with your router/firewall to redirect all incoming traffic (maybe just the http traffic) from your public ip to you private ip (192.168.1.2)
Hope this help
I'll throw in my process, since nothing on SO worked for me. Here are the steps I took to connect my physical android device to the web service running on my laptop (connected to the phone) on localhost:
Enable USB debugging on your Android device
Run your web service on your machine. My web service runs on localhost, port 3000 in development: http://localhost:3000/api/...
Run ifconfig (Unix), or ipconfig (Windows)
Find your machine's inet address on your LAN interface. Mine is 10.0.0.121 for interface wlan0. Externally, it is 68.43.XX.XXX, which is not the address that you want to use.
Use the LAN IP since you are connecting to your service on LAN, otherwise you might get an econnrefused (connection refused) error due to firewall rules
Build your http URL with that IP address, and the port that your web service is running on. For me, it's http://10.0.0.121:3000/api/...
When you launch your app, you should connections to your local web service in logs, Wireshark, etc, and you should see the desired activity/data in your Android application.
I had the same issues, researched a lot then found out that you have to explicitly make changes in your firewall settings. Your firewall is blocking your code to be accessed from external source. So, all you need to do is, go to firewall settings, add port 80 (in my case since, I am using Apache http Server) for inbound and outbound. Now, you can test it on your phone's browser http://192.16..**:80/
I've done that on a Mac using GasMask and Charles Proxy Server. Your phone and your computer have to be on the same network.
say the webservice url you want to access is at http://api.xyz.com, you first use GasMask to point that url to your localhost, then use Charles to set up a proxy server. Then you go to the settings on your phone, go into Wi-Fi, long-press the network you are connected to, choose Modify Network, and enter the proxy settings Charles gave you.
In my case, nothing of these solutions works because Windows firewall blocks it, but putting a rule on the firewall hasn't effect.
The problem in my case is that my laptop is connected with Wifi and Windows had the Wifi connection like a Public network. I must to change the network connection to Private network. http://www.comofuncionatodo.net/tecnologia/informatica/como-cambiar-de-red-publica-a-red-privada-en-windows-10/
I agree with the other answers as good approaches if you don't want to expose your DEV webservice on the internet. However, it's much easier if you do just expose the webservice. There's a number of free DNS services, but I've found no-ip to be the easiest to set up. I use it for exactly the purpose that you asked about; so I can test with my DEV webservice on a real device.
If you choose to go with no-ip (I have no affiliation with that company, it's just the one I've used and am familiar with), you can get a free publicly accessible URL like http://MyExampleWebServer.no-ip-org, and no-ip has a utility you can install so even if you're behind a dynamic IP, it will always keep the correct external IP associated with that URL. If you're working from your house, then you'd just need to make sure you port forward traffic from port 80 to your internal 192.x.x.x IP address (or whatever port you use; maybe 443 for ssl).
It's as easy as that, and now you can hit that webservice from any device that can access the internet.
I haven't worked with it, but I believe dyndns also offers a similar service.
This solution is for GAE development server in Eclipse
Step 1: Get the LAN IP
Goto your Windows Command Console (Press Win+R, then type "cmd"). In the console, enter "ipconfig". You will see a list of display. Under Wireless LAN adapter Wi-Fi, get the IPv4 Address. It will be something 192.168.x.x
LAN IP : 192.168.x.x
Step 2:
Go to Eclipse, Open the Configured server
Under Properties of GAE Development Server -> Local Interface address to bind to, enter the LAN IP address, and save.
Step 3:
Now you can access the GAE server by
http://192.168.x.x:8888/
8888 - Refers to the Port Number, as mentioned in the GAE development server
In order to access local web services using their own server hosts rather than IP addresses with ports, do these following steps:
Make sure your Android device and your local machine are on the same network.
Install SquidMan on your Mac, Linux, or any other Proxy Server.
Configure the proxy server's HTTPPort (ex. 5555) and clients (ex. 192.168.0.0/24) to your own network mask, and run the proxy server.
You are either using the web services in:
a. A web browser: Configure the proxy settings of your Android device from Modify WiFi networks.
b. Android application:
Set up the Proxy for your HTTP client. If you are using Volley, check this out: Volley Behind a Proxy server.
You can now connect to it by using whatever URL you are using on your host to connect to the web service (ex. http://my-local-machine.com)
Hint: If you got 4xx response codes, make sure your web service allows connections from other non-local-hosts.
If you are referring your localhost on your system from the Android emulator then you have to use
http://10.0.2.2:8080/
Because Android emulator runs inside a Virtual Machine(QEMU) therefore here 127.0.0.1 or localhost will be emulator's own loopback address.
I want to serve a website over an open wifi connection but I do not want this wifi connection to have access to the internet. Is this possible and how would I go about doing it.
I have setup websites locally and have gotten access in the browser through localhost or the IP address but I am not sure how I would go about setting up a webserver and serving the website via wifi.
Any insight on this?
you can access your machine's localhost via any computer easily, as long as that computer is connected to the said wifi.
get your computer name, and access it from other machine like this:
http://<your_computer_name_here:port_if_applicable>/website_folder_name
I do this to test my websites on mac and windows at home. My windows machine is called "The-Genius" and I access it via my mac like this:
http://The-Genius/Test/
which leads to the IIS.. if I want to access Apache, which is on port 78, I do this:
http://The-Genius:78/Test/
Hope it helps..
If you are using a wifi router, you don't have to do anything to get this to work. Whenever a client connects over wifi, they will be able to type in your webserver's IP address to see the website. If you want to use a DNS name then you might be able to set up the DNS names on the router itself.
Based on #LocustHorde's answer,
I tired the pc's IP address instead of using the pc name.
This worked fine for me...
http://172.168.1.21:8080/test/aa.php
I'm trying to test my iPhone application on the device.
I have a mac computer which stores my development environment.
Right now I can only access PHP files using the http://localhost/PHPFileLocation
which does not work when I try to test my app on real device.
How do I configure apache2 to be accessible from outside?
Is it possible to configure it to a specific IP address?
I want to reach some php scripts located on my development machine running apache2 from my iPhone device.
Thanks
If your computer has a WiFi card then you should be able to attach the iPhone remotely to a ad-hoc Wifi network created on your dev machine.
I'm assuming your Mac is behind a router. You should be able to configure your router to port forward connections to your WAN facing IP address to port 80 (the HTTP port) on your Mac - see http://portforward.com/ for some help.
You may also need to turn the firewall off on your Mac.
Once this is set up correctly you can hit http://yourexternalIP/PHPFileLocation in your iPhone app and this will be directed by your router to the Apache2 server on your Mac. The external IP is normally found on your router's admin page somewhere.