I have EasyPHP-deverser-17 installed and working well for months. Today, without any reason (i mean did not change anything), i get these error messages when opening the Dashboard:
Notice: Undefined offset: 3 in C:\Program Files (x86)\EasyPHP-Devserver-17\eds-dashboard\index.php on line 18
Notice: Undefined offset: 3 in C:\Program Files (x86)\EasyPHP-Devserver-17\eds-dashboard\index.php on line 23
I can't figure out what happened and i can't find any solution on how to fix this.
Thank you so much for any help.
Sylvain
If you have not fixed this issue since you asked this question, I found the answer on GitHub:
Step 1 - Download the link file:
Download Link (update): https://drive.google.com/file/d/12rP6-UM2OxO9Qmyn3FHI6AsGSOk4Avni/view?usp=sharing
Step 2 - As administrator authorization is required, authorize it.
Step 3 - On the screen click "Y" to continue ("N" to exit), and wait for the process;
Step 4 - Go to the options to start the servers in the icon that is in the system tray, or go to Dashboard and refresh the page, then start the servers in the HTTP and DB buttons.
I just tried to follow below step worked for me.
Open cmd run as administrator.
Navigate to the C:\Program Files (x86)\EasyPHP-Devserver-17
Type cmd lodctr /r and press enter.
Success to all!
Related
I try to add a cron job on an elearning.mysite.gr(Moodle). Although my host gives this message every hour.
Oct 2 1:10:01 linux CROND[123456]: (admin) CMD (touch /tmp/test.txt > /dev/null)
On my site administration -> notifications get this message:
The admin/cli/cron.php script has not been run for 3 days 2 hours and should run every 1 min.
At moodle documentation
/path/to/moodle/admin/cli/cron.php, can i use it ? in which way ?
I tried this :
/usr/bin/php /path/to/moodle/admin/cli/cron.php
but gives me that the process completed with error at one minute
only this touch /tmp/test.txt > /dev/null
completed with success.
Moodle Documentation:
The CLI (command line interpreter) script. This will be at the path /path/to/moodle/admin/cli/cron.php
If in doubt, this is the correct script to use. This needs to be run by a 'PHP CLI' program on your computer. So the final command may look something like /usr/bin/php /path/to/moodle/admin/cli/cron.php You can (and should) try this on your command line to see if it works. WARNING: Check your command-line PHP version is compatible with your chosen version of Moodle.-How to check it?
The command-line PHP program is different to the one running your web site and is not always the same version.
I don't know what to do...I will appreciate any help!!!
I tried by my host panel interface :
Type of progress:
Command line
URL
PHP
i should choose one from 3.
Command*:
placeholder to add my command to be excecuted
Excecute:
Dropdown
1.Cron style
2.Daily at 00:00
I use command line.
touch /tmp/test.txt
When i add
cron style and 1 * * * * * , get message for syntax.
and for
daily at 00:00 success message but on my notification of my site has
The admin/cli/cron.php script has not been run for 17 days 22 hours and should run every 1 min.
That's the icon of my Plesk Login. To change the path/to/moodle/admin/cli/cron.php xould i check the file manager in order to find cron.php file ??
As you add the cron from a web interface (maybe Plesk ?) you only need this part:
/path/to/moodle/admin/cli/cron.php
replace /path/to/moodle/ with the real path on your server, usulay something like /var/www/moodle/ or /var/www/vhosts/domain.name/httpdocs/moodle
To run every 1 minute cron style is :
* * * * *
If you can choose PHP version, choose the same version as the one you are using for Moodle.
Finally, I give this touch /tmp/test.txt ->and at cron style the touch /tmp/test.txt, as you suggest to me.
Because the other commands cannot complete with success.
But in my notifications,(Site administration-Moodle) i still get the message that cron don't run.
Problem
"liveSass.command.watchMySass not found" and "Extension host terminated unexpectedly” in vs code on windows 10 while using live-sass-compiler extension.
Failed attempts:
manually deleted the extension from the .vscode folder and reinstalled it as per #219
[Antivirus/defender] tried excluding the extensionHostProcess.js file at C:\Users\ (user file name e.g- hp...etc) \AppData\Local\Programs\Microsoft VSCode\resources\app\out\vs\workbench\services\extensions\node\extensionHostProcess.js as per #94858
Disabled all extensions and tried running as per #94807
Tried restoring quarantined files from antivirus/defender
Tried all the aforementioned steps again after reinstalling vs code.
downloaded vscode - January 2020 (version 1.42) build as per https://stackoverflow.com/a/61133333/11045279
Error log
c:\Users\ADITYA\.vscode\extensions\ritwickdey.live-sass-3.0.0\node_modules\sasslib\sass.sync.js:61
var Module=typeof Module!=="undefined"?Module:{};var moduleOverrides={};var key;
for(key in Module){if(Module.hasOwnProperty(key)){moduleOverrides[key]=Module[key]}}
Module["arguments"]=[];
Module["thisProgram"]="./this.program";
Module["quit"]=(function(status,toThrow){throw toThrow});Module["preRun"]=[];Module["postRun"]=[];
var ENVIRONMENT_IS_WEB=false;var ENVIRONMENT_IS_WORKER=false;var ENVIRONMENT_IS_NODE=false;
var ENVIRONMENT_IS_SHELL=false;
if(Module["ENVIRONMENT"]){if(Module["ENVIRONMENT"]==="WEB"){ENVIRONMENT_IS_WEB=true}
else if(Module["ENVIRONMENT"]==="WORKER"){ENVIRONMENT_IS_WORKER=true}
else if(Module["ENVIRONMENT"]==="NODE"){ENVIRONMENT_IS_NODE=true}
else if(Module["ENVIRONMENT"]==="SHELL"){ENVIRONMENT_IS_SHELL=true}
else{throw new Error("Module['ENVIRONMENT'] value is not valid. must be one
of: WEB|WORKER|NODE|SHELL.")}}else{ENVIRONMENT_IS_WEB=typeof
window==="object";ENVIRONMENT_IS_WORKER=typeof importSc
Error: Import "node_modules/bootstrap/scss/bootstrap" could not be resolved.
at File.load (D:\Projects\vscode-ext-color-highlight\node_modules\file-importer\index.js:130:1)
at D:\Projects\vscode-ext-color-highlight\node_modules\file-importer\index.js:136:1
at FSReqCallback.oncomplete (fs.js:165:21)
abstractExtensionService.ts:155 Extension host terminated unexpectedly. Code: 7 Signal: null
Thanks.
Here's the fix so you don't have the nightmare I've been having.
Uninstall live sass and close VScode.
For Windows, type the following into file explorer:
%USERPROFILE%.vscode\extensions
Then delete the folder for live sass. Should be called something like:
ritwickdey.live-sass-3.0.0
Open VScode, reinstall live sass.
Done
The problem that's not about installation problem, that's need to open VS Code editor and then create new file with SCSS format. For example, style.scss, and please wait for second and then you see watch sass in below of vscode.
So I checked my spam folder today and had 122 messages send through the server stating:
PHP Warning: Module 'imagick' already loaded in Unknown on line 0
Non stop it keeps sending me this.
Googled it and still have no clue on how to fix it as I need a step by step answer.
Found a similar question on stack but it's too complicated for me to understand.
I'm on the latest Plesk Onyx and OS=Ubuntu 16.04.6 LTS.
As I'm running php 7.3 I hoped when I uninstalled php 7.0 in plesk it would go away but unfortunately it didn't.
It's send from here
Cron <root#server> [ -x /usr/lib/php/sessionclean ] && /usr/lib/php/sessionclean
And after php --ini (read about it on a forum) this was the result:
PHP Warning: Module 'imagick' already loaded in Unknown on line 0
Configuration File (php.ini) Path: /etc/php/7.0/cli
Loaded Configuration File: /etc/php/7.0/cli/php.ini
Scan for additional .ini files in: /etc/php/7.0/cli/conf.d
Additional .ini files parsed: /etc/php/7.0/cli/conf.d/00-ioncube-loader-7.0.ini,
/etc/php/7.0/cli/conf.d/10-mysqlnd.ini,
/etc/php/7.0/cli/conf.d/10-opcache.ini,
/etc/php/7.0/cli/conf.d/10-pdo.ini,
/etc/php/7.0/cli/conf.d/15-xml.ini,
/etc/php/7.0/cli/conf.d/20-calendar.ini,
/etc/php/7.0/cli/conf.d/20-ctype.ini,
/etc/php/7.0/cli/conf.d/20-curl.ini,
/etc/php/7.0/cli/conf.d/20-dom.ini,
/etc/php/7.0/cli/conf.d/20-exif.ini,
/etc/php/7.0/cli/conf.d/20-fileinfo.ini,
/etc/php/7.0/cli/conf.d/20-ftp.ini,
/etc/php/7.0/cli/conf.d/20-gd.ini,
/etc/php/7.0/cli/conf.d/20-gettext.ini,
/etc/php/7.0/cli/conf.d/20-iconv.ini,
/etc/php/7.0/cli/conf.d/20-imagick.ini,
/etc/php/7.0/cli/conf.d/20-imap.ini,
/etc/php/7.0/cli/conf.d/20-json.ini,
/etc/php/7.0/cli/conf.d/20-mbstring.ini,
/etc/php/7.0/cli/conf.d/20-mysqli.ini,
/etc/php/7.0/cli/conf.d/20-pdo_mysql.ini,
/etc/php/7.0/cli/conf.d/20-pdo_sqlite.ini,
/etc/php/7.0/cli/conf.d/20-phar.ini,
/etc/php/7.0/cli/conf.d/20-posix.ini,
/etc/php/7.0/cli/conf.d/20-readline.ini,
/etc/php/7.0/cli/conf.d/20-shmop.ini,
/etc/php/7.0/cli/conf.d/20-simplexml.ini,
/etc/php/7.0/cli/conf.d/20-sockets.ini,
/etc/php/7.0/cli/conf.d/20-sqlite3.ini,
/etc/php/7.0/cli/conf.d/20-sysvmsg.ini,
/etc/php/7.0/cli/conf.d/20-sysvsem.ini,
/etc/php/7.0/cli/conf.d/20-sysvshm.ini,
/etc/php/7.0/cli/conf.d/20-tokenizer.ini,
/etc/php/7.0/cli/conf.d/20-wddx.ini,
/etc/php/7.0/cli/conf.d/20-xmlreader.ini,
/etc/php/7.0/cli/conf.d/20-xmlwriter.ini,
/etc/php/7.0/cli/conf.d/20-xsl.ini,
/etc/php/7.0/cli/conf.d/20-zip.ini,
/etc/php/7.0/cli/conf.d/zend_extensions_psa.ini
I already know it's probably easily fixed when you know linux but I'm learning on the go and posses very little knowledge yet.
Could anyone assist me with the right commands?
Cheers
Locate where is your php.ini file by:
php -i | grep Configuration
Configuration File (php.ini) Path => /usr/local/etc/php/7.4
Loaded Configuration File => /usr/local/etc/php/7.4/php.ini
Open the php.ini file and remove the line:
extension=imagick.so
or change the line to a comment:
; extension=imagick.so
I downloaded and installed the latest Ma version of Maxima from source forge. When I try to launch it, I get
“Maxima.app” is damaged and can’t be opened. You should move it to the Trash.
This happens with both available versions, the one with VTK and the one without VTK.
How can I get it running?
I have MacOS 10.12.6
and both versions are here:
https://sourceforge.net/projects/maxima/files/Maxima-MacOS/5.40.0-MacOSX/
Others have run into the same problem. I don't use MacOS so I'm not sure what the problem is. Anyway, take a look at this bug report: #3316: Maxima VTK for Mac 5.40 is corrupt. The person who submitted it reported they got it working by following the advice in the comments.
See also thread 39: https://sourceforge.net/p/maxima/support-requests/39/
This is a really important thread to the larger MacOS community.
I have a MacBook Pro running OS X El Capitan, which is locked down a few versions back from the current MacOS Mojave.
I spent an entire night trying to get every wxMaxima from 5.36 to 5.42 running without success - even compiling from sources.
In desperation I found the thread 39 and entered the line:
(setf sb-impl::default-external-format :utf-8)
into a ~home/.sbclrc file (/Users/myName/.sbclrc). It was only then that the GUI and the Maxima engine could connect and a normal session could be established. Maxima, its maintainers and its users are too important a world resource to be stymied by such an esoteric and non-obvious bug.
A user encountering this bug will first go into the preferences menu and start trying to make sure that the file addresses and port numbers are correct, but experimentation can corrupt these and lead to other problems.
In my case following excerpt from https://sourceforge.net/p/maxima/mailman/message/35910588/ helped:
(0) Double-click the icon of "Terminal.app" in the folder "/Applications/Utilities", then the command-line-user-interface window is opened.
(1) Move the current working directory to the location of the disc image with the command "cd". (e.g. "Downloads" folder)
$ cd $HOME/Downloads
(2) You can check the attribute with the command "ls -l#":
(You will be able to find "com.apple.quarantine" which is the name of the attribute.)
$ ls -l# ./*.dmg
-rw-r--r--# 1 name staff 471227521 6 24 23:17 ./Maxima-5.40.0-VTK-macOS.dmg
com.apple.quarantine 62
(3) Remove the attribute "com.apple.quarantine" with the command "xattr -d com.apple.quarantine ./*.dmg":
$ xattr -d com.apple.quarantine ./Maxima-5.40.0-VTK-macOS.dmg
(4) Verify that the attribute "com.apple.quarantine" was removed:
$ ls -l# ./*.dmg
-rw-r--r-- 1 name staff 471227521 6 24 23:17 ./Maxima-5.40.0-VTK-macOS.dmg
(5) Double-click the icon of the disc image file to open.
After that, you should install Maxima.app into your "Applications" folder ("/Applications"). And you should drag the Launchers icon from the disc image to another place of your filesystem. You can install launchers to anywhere you like.
Then you will be able to launch Maxima with Maxima.app or launchers.
I'm trying to start up WildFly 8 with a custom start.bat file that calls standalone.bat and then also a custom property file. When I run my start.bat I get this error in the command line:
C:\PWServer8>propworks_start.bat
C:\PWServer8\bin>call standalone.bat -P=../propworks/conf/propworks.properties -b 10.10.100.122
Calling "C:\PWServer8\bin\standalone.conf.bat"
Files\Java\jdk1.7.0_40"" was unexpected at this time.
I've done a search for "was unexpected at this time" within all the files in my WildFly folder but nothing turned up so I couldn't pinpoint where the error is coming from. Here is my custom start.bat and afterwards is my property file. If anyone knows what's going on it would be a big help.
propworks_start.bat
C:
cd C:\PWServer8\bin
SET JAVA_HOME="C:\Program Files\Java\jdk1.7.0_40"
call standalone.bat -P=../propworks/conf/propworks.properties -b 10.10.100.122
propworks.properties
#PROPworks Configuration Properties
#Wed Jun 18 17:18:03 EDT 2014
propworks.bind.address=10.10.100.122
propworks.database.class=Oracle10g
propworks.database.connection.sql=select 1 From Dual
propworks.database.desc=support#mcosrvorcl001
propworks.database.dialect=com.airit.propworks.server.dialect.PWOracleDialect
propworks.database.driver=oracle
propworks.database.password=-5522f65bbe2cc1c6
propworks.database.schema=uc2014
propworks.database.url=jdbc\:oracle\:thin\:#10.10.201.10\:1521\:bsdev
propworks.database.user=uc2014
propworks.http.port=8080
propworks.indb.use=NONE
propworks.jdk.home=C\:\\Program Files\\Java\\jdk1.7.0_40
propworks.messaging.port=5445
propworks.remoting.port=4447
archiver.enabled=N
orafin.database.driver=oracle
orafin.database.password=
orafin.database.user=
org.quartz.dataSource.QUARTZ.jndiURL=java\:/propworksDS
org.quartz.dataSource.QUARTZ_NO_TX.jndiURL=java\:/quartzDS
org.quartz.jobStore.class=org.quartz.impl.jdbcjobstore.JobStoreCMT
org.quartz.jobStore.dataSource=QUARTZ
org.quartz.jobStore.driverDelegateClass=org.quartz.impl.jdbcjobstore.StdJDBCDelegate
org.quartz.jobStore.nonManagedTXDataSource=QUARTZ_NO_TX
org.quartz.jobStore.selectWithLockSQL=SELECT * FROM {0}LOCKS WHERE LOCK_NAME \= ? FOR UPDATE
org.quartz.jobStore.tablePrefix=QRTZ_
org.quartz.scheduler.instanceName=DefaultQuartzScheduler
org.quartz.scheduler.rmi.export=false
org.quartz.scheduler.rmi.proxy=false
org.quartz.scheduler.xaTransacted=false
org.quartz.threadPool.class=org.quartz.simpl.SimpleThreadPool
org.quartz.threadPool.threadCount=3
org.quartz.threadPool.threadPriority=9
psfin.database.driver=oracle
psfin.database.password=
psfin.database.user=
pwarchiver.database.driver=oracle
pwarchiver.database.password=
pwarchiver.database.user=
Two solutions:
1) move java to folder that does not have spaces in it.
2) double quote path when you set it
SET JAVA_HOME=""C:\Program Files\Java\jdk1.7.0_40""
add \ similar below :
SET JAVA_HOME=C:\Program Files\Java\jdk1.7.0_40\
this is caused by the space in front of C:\Program , so what u need to do is changing your JAVA file in c:program files \java to another file without spaces , and then in top of your file write :
SET JAVA_HOME=""NEW DIRECTORY WITHOUT SPACE\Java\jdk1.7.0_40""
this worked for me.