So I checked my spam folder today and had 122 messages send through the server stating:
PHP Warning: Module 'imagick' already loaded in Unknown on line 0
Non stop it keeps sending me this.
Googled it and still have no clue on how to fix it as I need a step by step answer.
Found a similar question on stack but it's too complicated for me to understand.
I'm on the latest Plesk Onyx and OS=Ubuntu 16.04.6 LTS‬.
As I'm running php 7.3 I hoped when I uninstalled php 7.0 in plesk it would go away but unfortunately it didn't.
It's send from here
Cron <root#server> [ -x /usr/lib/php/sessionclean ] && /usr/lib/php/sessionclean
And after php --ini (read about it on a forum) this was the result:
PHP Warning: Module 'imagick' already loaded in Unknown on line 0
Configuration File (php.ini) Path: /etc/php/7.0/cli
Loaded Configuration File: /etc/php/7.0/cli/php.ini
Scan for additional .ini files in: /etc/php/7.0/cli/conf.d
Additional .ini files parsed: /etc/php/7.0/cli/conf.d/00-ioncube-loader-7.0.ini,
/etc/php/7.0/cli/conf.d/10-mysqlnd.ini,
/etc/php/7.0/cli/conf.d/10-opcache.ini,
/etc/php/7.0/cli/conf.d/10-pdo.ini,
/etc/php/7.0/cli/conf.d/15-xml.ini,
/etc/php/7.0/cli/conf.d/20-calendar.ini,
/etc/php/7.0/cli/conf.d/20-ctype.ini,
/etc/php/7.0/cli/conf.d/20-curl.ini,
/etc/php/7.0/cli/conf.d/20-dom.ini,
/etc/php/7.0/cli/conf.d/20-exif.ini,
/etc/php/7.0/cli/conf.d/20-fileinfo.ini,
/etc/php/7.0/cli/conf.d/20-ftp.ini,
/etc/php/7.0/cli/conf.d/20-gd.ini,
/etc/php/7.0/cli/conf.d/20-gettext.ini,
/etc/php/7.0/cli/conf.d/20-iconv.ini,
/etc/php/7.0/cli/conf.d/20-imagick.ini,
/etc/php/7.0/cli/conf.d/20-imap.ini,
/etc/php/7.0/cli/conf.d/20-json.ini,
/etc/php/7.0/cli/conf.d/20-mbstring.ini,
/etc/php/7.0/cli/conf.d/20-mysqli.ini,
/etc/php/7.0/cli/conf.d/20-pdo_mysql.ini,
/etc/php/7.0/cli/conf.d/20-pdo_sqlite.ini,
/etc/php/7.0/cli/conf.d/20-phar.ini,
/etc/php/7.0/cli/conf.d/20-posix.ini,
/etc/php/7.0/cli/conf.d/20-readline.ini,
/etc/php/7.0/cli/conf.d/20-shmop.ini,
/etc/php/7.0/cli/conf.d/20-simplexml.ini,
/etc/php/7.0/cli/conf.d/20-sockets.ini,
/etc/php/7.0/cli/conf.d/20-sqlite3.ini,
/etc/php/7.0/cli/conf.d/20-sysvmsg.ini,
/etc/php/7.0/cli/conf.d/20-sysvsem.ini,
/etc/php/7.0/cli/conf.d/20-sysvshm.ini,
/etc/php/7.0/cli/conf.d/20-tokenizer.ini,
/etc/php/7.0/cli/conf.d/20-wddx.ini,
/etc/php/7.0/cli/conf.d/20-xmlreader.ini,
/etc/php/7.0/cli/conf.d/20-xmlwriter.ini,
/etc/php/7.0/cli/conf.d/20-xsl.ini,
/etc/php/7.0/cli/conf.d/20-zip.ini,
/etc/php/7.0/cli/conf.d/zend_extensions_psa.ini
I already know it's probably easily fixed when you know linux but I'm learning on the go and posses very little knowledge yet.
Could anyone assist me with the right commands?
Cheers
Locate where is your php.ini file by:
php -i | grep Configuration
Configuration File (php.ini) Path => /usr/local/etc/php/7.4
Loaded Configuration File => /usr/local/etc/php/7.4/php.ini
Open the php.ini file and remove the line:
extension=imagick.so
or change the line to a comment:
; extension=imagick.so
Related
we got a new WebServer with CentOS, Plesk and php-fpm.
Now we don't get the php extension running.
What we did:
installed latest SQL Anywhere 17 (ebf29577)
copied php-7.3.0_sqlanywhere_r.so to /opt/plesk/php/7.3/lib64/php/modules/
loading php-7.3.0_sqlanywhere_r.so via /opt/plesk/php/7.3/etc/php.d/sqlanywhere.ini
this leads to an error:
WARNING: [pool plesk-php73-fpm.plesk-service.localdomain] child 11616 said into stderr: "NOTICE: PHP message: PHP Warning: request_startup() for sqlanywhere module failed in Unknown on line 0"
(This leads to php 7.3 fpm is not loading at all)
next try was to switch from FPM to CGI: same error
module is loadable itself within shell if LD_LIBRARY_PATH was enhanced with path /opt/sqlanywhere17/lib64/
some tries getting the cause by strace did not help
Has anybody an idea or maybe even successfully installed php extension.
Thanks
Florian
after a lot of tests we found a solution:
in Plesk Domain php settings we had to add:
[php-fpm-pool-settings]
env[LD_LIBRARY_PATH]="/opt/sqlanywhere_v2/lib64:$LD_LIBRARY_PATH"
Now all libs are found and it works
For me solution was, creating custom handler:
plesk bin php_handler --add -displayname "PHP SQLAnywhere 7.4" -path /opt/php-custom-handlers/7.4/php-sqlanywhere.fcgi -clipath /opt/plesk/php/7.4/bin/php -phpini /opt/plesk/php/7.4/etc/php.ini -type fastcgi
php-sqlanywhere.fcgi contents:
#!/bin/bash
LD_LIBRARY_PATH=/opt/sqlanywhere17/lib64
export LD_LIBRARY_PATH
exec /opt/plesk/php/7.4/bin/php-cgi "$#"
And finally using this handler on domain php settings and adding on additional directives:
extension=sqlanywhere.so
I installed Composer and a SDK for Mailgun's service. These are the steps i followed:
# current directory
cd ~
# Install Composer
curl -sS https://getcomposer.org/installer | php
# Add Mailgun as a dependency
php composer.phar require mailgun/mailgun-php:~1.7
According to the instructions, all I did after that was (index.php):
<?php
require 'vendor/autoload.php';
use Mailgun\Mailgun;
# First, instantiate the SDK with your API credentials and define your domain.
$mg = new Mailgun("key-my-key-goes-here-987654321");
$domain = "somedomain.com";
Then, I tried to get the list of bounced emails:
$data = $mg->get("$domain/bounces", array('limit' => 15, 'skip' => 0));
var_dump($data);
...and I'm getting this error:
Warning: require(vendor/autoload.php): failed to open stream: No such
file or directory in /var/www/html/index.php on line 2 Fatal error:
require(): Failed opening required 'vendor/autoload.php'
(include_path='.:/usr/share/pear:/usr/share/php') in
/var/www/html/index.php on line 2
So I'm guessing it has something to do with composer's installation/configuration perhaps? Thanks for any help...
The way you programmed it, you must have the following files all in the same directory:
composer.json
index.php (your test script)
And you must have run the composer require command while being inside this directory. This will also create a directory named vendor here, and add plenty of files, amongst them vendor/autoload.php.
If however your test script isn't in this location, the require call will not find the file where you tell PHP to find it. This isn't any failure of Composer, but simply the fact that you have to include that file according to your situation, not by copy&paste code. If you change the path of your test script, you have to change the path of the vendor directory as well.
I am trying to load a graph in fuseki. The server is working as it should.
But when I try s-put inside the fuseki folder it tells me s-put is not found?!
hdeus$ ls
DEPENDENCIES config.ttl s-delete
Data fuseki s-get
LICENSE fuseki-server s-head
NOTICE fuseki-server.bat s-post
ReleaseNotes.txt fuseki-server.jar s-put
config-examples.ttl fuseki_config.ttl s-query
config-inf-tdb.ttl log4j.properties s-update
config-tdb.ttl pages s-update-form
hdeus$ sudo ./s-put http://localhost:3030/ds/data default Data/books.ttl
sudo: ./s-put: command not found
Any idea what the problem might be? I tried copy/paste s-put from the ls output but stil nothing... I am working in mac os X
Is the file executable? If you unpacked from the zip file, you need to set the s-* executable. Also, you need ruby installed.
I was using this piece of php script in a application running under over XAMPP on my local machine:
$dom = new DomDocument();
$filename = "library.xml";
if (!$dom->load($filename))
die("Could not parse iTunes XML file: ".$filename);
Then i tried to move this application to a WampServer without success, with the following warning:
Warning: DOMDocument::load() [domdocument.load]: I/O warning : failed to load external entity "file:///C:/wamp/www/parser/library.xml" in C:\wamp\www\parser\includes\libs\itunes_xml_parser.lib.php on line 111
This line in the error is exactly the load line, which worked flawlessly in earlier versions of XAMPP and isn't working now on XAMPP 1.7.7
As per this why don't you try using an absolute path for your filepath.
Also i see that this php file is located at C:\wamp\www\parser\includes\libs and library.xml is being searched at C:/wamp/www/parser/. Is this correct?
It could also be possible that you had turned off warnings/errors in your earlier xampp installation.So check this also.
I installed moodle 1.9.12 and now I want to use Algebra notation in content. I enable "TeX Notation" and "Algebra Notation" in administrator panel and also install mimetext and dvips and Imagemagic on the server. fortunately Tex Notation works fine but I got the following error for Algebra:
sh: /var/www/html/moodle/filter/tex/mimetex.linux: not found
The shell command
"/var/www/html/moodle/filter/tex/mimetex.linux" -e "/var/www/moodledata/filter/algebra/de06d6c44d98ba4e42dffca988bf530b.gif" -- '\Large \frac{\sin\left(z\right)}{x^{2}+y^{2}}'
returned status = 127
File size of mimetex executable /var/www/html/moodle/filter/tex/mimetex.linux is 830675
The file permissions are: 100775
The md5 checksum of the file is 56bcc40de905ce92ebd7b083c76e019e
Image not found!
Note: /var/www/html/moodle/filter/tex/mimetex.linux exists on the server and is executable!!!
What is the problem?? Any idea?????
From what you have described, calling the general tex filter debug page works and does not show up the same error.
/filter/tex/texdebug.php works, but /filter/algebra/algebradebug.php does not.
If this is the case, perhaps you could check for an open_basedir, or safe_mode_exec_dir being set to include the current working directory, or otherwise restricting the execution of /var/www/html/moodle/filter/tex/mimetex.linux, while the current working directory is /var/www/html/moodle/filter/algebra.
You could look at this by visiting /admin/phpinfo.php at your site, and look carefully at the effective values of open_basedir, safe_mode and safe_mode_exec_dir.
You could also check the apache error log or add the following lines to the top of the algebra debug php file, and you might see some extra error messages:
$CFG->debug = 6143 ;
$CFG->debugdisplay= 1 ;
Hope that helps