I'm trying to have turtles match based on attraction parameters, however I only get either one match or one mismatch and won't count anymore turtles matching, as well as not moving the counter forward.
to new-couple
set countdown2 5
ask turtles [
;; CREATE NEW COUPLE
ifelse countdown2 <= 0
[ die ]
[ set countdown2 countdown2 - 1 ] ]
end
The code that you have provided does not have an error. Try this version of it and you will see that the new-couple code correctly reduces the countdown 5 times and then kills the rest of the turtles. So it's not producing the problem that you describe of things only happening once.
to testme
clear-all
create-turtles 10
type "Start turtles: " print count turtles
new-couple
type "End turtles: " print count turtles
end
to new-couple
let countdown2 5
ask turtles [
;; CREATE NEW COUPLE
ifelse countdown2 <= 0
[ die ]
[ set countdown2 countdown2 - 1 ] ]
end
Could you please provide more of your code. Also, an explanation of what the countdown is supposed to achieve could be useful. At the moment it basically selects the number of turtles that don't die and there are easier ways to achieve that.
Related
I want a little help. I want turtles to cooperate with 50% probability if their land parcels are > 5.
I am writing as
ifelse random 1 = 0 and land > 5
[set cooperate? true]
[set cooperate? false]
But it gives error that; The > operator can only be used on two numbers, two strings, or two agents of the same type, but not on a string and a number.
how to correct it?
Thanks
There's not quite enough information to diagnose the problem. Is this code inside an ask turtles block with the variable 'land' as a turtles-own attribute? Also, you might want to print off some values of 'land' to make sure you actually have numbers in it.
As you can see from the working example below, there is no error in the code you have provided.
turtles-own [ land cooperate? ]
to testme
clear-all
create-turtles 10
[ set land random 10
ifelse random 1 = 0 and land > 5
[ set cooperate? true ]
[ set cooperate? false ]
]
type "Cooperating: " print count turtles with [cooperate?]
type "Not cooperating: " print count turtles with [not cooperate?]
end
I am trying to implement a timer for each turtle in Netlogo
so I can take the minimum value, maximum and average time taken for each turtle.
Can anyone help
You haven't said what you actually want timed (or given any code attempt). Any time you need a turtle to remember anything from one tick to the next, you need a variable. The simplest code for a timer is to have a variable that you set to the current value of ticks when the process starts and subtract that start time from the current value of ticks when the process stops. Here is a complete model example:
turtles-own
[ start-time
time-taken
]
to setup
clear-all
create-turtles 20
[ set start-time 2 + random 10
set time-taken -1
]
reset-ticks
end
to go
let movers turtles with [time-taken = -1 and start-time <= ticks]
ask movers
[ set heading random 360
forward 1 + random 3
if random-float 1 < 0.05 [ set time-taken ticks - start-time ]
]
tick
end
And check out the new Time extension if you want your timers to use real time units (seconds, minutes, years...) and have non-integer values.
https://github.com/NetLogo/Time-Extension
Look at primitives such as time:difference-between
For example, you could do this coding that flags the turtle you want to monitor and increments the flag variable when an event occurs. You can then monitor it in the BehaviorSpace and analyses the results output in a csv file. For example, the following codes:
globals [ID]
turtles-own [special-turtle]
to create-turtle
crt 1 [
setxy min-pxcor 0
set heading 90
set special-turtle false
set ID who]
end
to go
;omitted
special-turtles
tick
end
to special-turtles
ask turtles-on patch 0 0 [set ID who]
ask max-one-of turtles [who] [set special-turtle true]
ask turtles with [special-turtle = true][set special-turtle (special-turtle + 1)]
end
I think there is something that none of the previous answers considered: the way you implement your timer depends on how you want to use the measurement.
1 - If you want to read the measurement only after the measurement is completed
The expression "after the measurement is completed" can mean both that you want to read it at some point later during the model, or maybe even just from some model's output.
The approach I'd take in this case is similar to what JenB suggested, but I believe you can put it a bit simpler because here I only use one extra turtle variable (apart from my-variable, that is there only to represent something that you already have in your model):
turtles-own [
my-variable ; This represents something you have in your model, to be used as a condition for the timer
my-timer
]
to setup
clear-all
reset-ticks
create-turtles 10
end
to go
; Here you have your normal code. When you need, just include
; 'start-timer' and 'stop-timer'. For simplicity, let's
; say you want to count how long does each turtle take
; to get from a value of 1 to a value of 5 for my-variable.
; You can just do:
ask turtles [
if (random 10 < 2) [
set my-variable (my-variable + 1)
]
if (my-variable = 1) [
start-timer
]
if (my-variable = 5) [
stop-timer
type "I am turtle " type who type " and it took me " type my-timer print " ticks."
die
]
]
tick
if (not any? turtles) [stop]
end
to start-timer
set my-timer ticks
end
to stop-timer
set my-timer (ticks - my-timer)
end
Note that most of the code is there only to make a full reproducible example, but the actual implementation only consists of my-timer, to start-timer and to stop-timer.
You can take this approach because the hypothesis here is that you will be interested in reading the measurement only after to stop-timer happened.
Otherwise, see point 2.
2 - If you want to be able to read the measurement at any moment during the simulation
In this case, you need to make the timer progress as time progresses (as opposed to point 1, where you could just take the initial and final time, and make the difference between the two).
I guess the easiest way to do this is to conditionally increment the timer every time there is a tick.
Taking the same example as before, it would be something like:
turtles-own [
my-variable ; This represents something you have in your model, to be used as a condition for the timer
timer-active?
my-timer
]
to setup
clear-all
reset-ticks
create-turtles 10 [
set timer-active? FALSE
]
end
to go
ask turtles [
if (random 10 < 2) [
set my-variable (my-variable + 1)
]
if (my-variable = 1) [
set timer-active? TRUE
]
if (my-variable = 5) [
set timer-active? FALSE
]
]
tick
ask turtles with [timer-active?] [
set my-timer (my-timer + 1)
]
if (count turtles with [my-variable < 5] = 0) [stop]
end
This way, you will be able to see at any moment what is the current value of my-timer for each turtle.
I would like to implement a part of code where agents can get a score when they pick an element from a list generated from a specific turtle.
I set
breed [playersA playerA]
breed [playersB playerB]
breed [balls ball]
playersA-own[
my-list
new_ball
score
]
playersB-own[
my-list
new_ball
score
]
to setup
clear-all
create-playersA 10
ask playerA 0 [ create-links-with other playersA ]
ask playerA 2 [ create-link-with playerA 1 ]
create-playersB 10
ask playerB 0 [ create-links-with other playersB ]
ask playerB 2 [ create-link-with playerA 1 ]
ask playersA[
set my-list []
set score 0
]
ask playersB[
set my-list []
set score 0
]
end
to go
let selected nobody
let team-player nobody
set selected one-of turtles with [breed=playersA or breed=playersB]
ifelse [breed = playersA] of selected[
ask selected [
set size [count link-neighbors] of self
show size
]
create-balls 1[
hide-turtle
]
]
[ ask selected [
set size [count link-neighbors] of self
show size
]
create-balls 1[
hide-turtle
]
]
set team-player link-neighbors with [breed = playersA]
ask team_player [
set my-list lput my-ball my-list
]
end
The above code should select on random turtle and add a new ball to its neighbours list. What I would need is probably a counter that can compute how many balls were shared between players.
Could you please help me to figure out with it?
Thanks
The code you posted has many problems that prevent it from passing error-checking in the editor. Some of these produce surprising error messages that don't even make sense, and they happen because the logic mixes contexts -- that is, some commands make sense for the "observer" level, some require being in a "turtle" context, etc.
I think you are trying to do too much at once, and trying to add a counter to code that already does not work. First you have to fix the code you have and then you can see where to add a counter.
You absolutely must understand how the unique agent id number "who" works. Each turtle has a unique who number assigned, starting with zero. It doesn't matter whether the breed of turtle is playerA or playerB or a ball, it will have a unique number. Once you create your first 10 turtles, of the PlayerA breed, they will have who numbers 0 through 9. Then, when you create the next 10 turtles, of PlayerB breed, they will get assigned who numbers of 10 through 19. If you then create a ball, say, it will have a who number of 20.
So there will never be a PlayerB with a who number of 0 or 1 or 2. Those numbers will already be used by PlayerA. Your setup will crash with the error:
playera 0 is not a PLAYERB error while observer running PLAYERB
called by Command Center
Even with just PlayerA, it is not clear what kind of network you want to build in the setup code. Why would everyone link to player 0, but then also add a single link between player 1 and player 2? Since players only "see" their linked team-mates, only player zero will see everyone else. Other players will have only one or two link-neighbors, so they will never update everyone else's my-lists.
create-playersA 10
ask playerA 0 [ create-links-with other playersA ]
ask playerA 2 [ create-link-with playerA 1 ]
Anyway, I would suggest that you get this much working correctly before trying to add counting.
I don't think you can do that by just looking at the code. You need to get rid of as much complexity as you can, and then use shapes, colors, and numerous print statements to see whether each command is doing what you think it should do. Complex working code almost always evolves from simple working code.
So get rid of PlayersB entirely ( comment out the code ), only create 5 players A, and change the colors and shapes as you process each step to confirm that it is working. The editor lets you use ctrl-; to comment out entire blocks of code, or un-comment them at once, so comment out everything you possibly can while you are getting one step to work, then uncomment the next section, get that to work, etc.
When you finally get everything working, you can comment out all your print statements that you used in development.
Anyway, I refactored your code, added many comment, and added many print statements, and finally got it to run. If you run just setup and look at the view, you will see what I mean about the network. ( I shut off wrapping in the view so the network looks right.)
Here's my revision of your code. It prints out what is in each player's my-list after each step, so you can see at a glance if it is doing what you want, or not. ( It's not.)
I added the who numbers as a label to each player in the view so you can see what I mean.
It produces helpful output like:
let's confirm that the lists have been updated. Here's the my-lists
for playersA [[5 5 5 5 10] [0 0 0 0 0] [0 8 8] [0 0] [0 9]]
Get the setup step to work correctly and generate the network you want before you even try to fix the go section.
breed [playersA playerA]
breed [playersB playerB]
breed [balls ball]
playersA-own[
my-list
new_ball
score
]
playersB-own[
my-list
new_ball
score
]
to setup
clear-all
;; for debugging, only create 3 players and inspect the results to confirm it's working as you intended
;; use labels to see player numbers in the view
create-playersA 5 [ set size 1 set color blue set shape "square" setxy random-xcor random-ycor set label who]
ask playerA 0 [ create-links-with other playersA [set color blue]]
ask playerA 2 [ create-link-with playerA 1 [set color red]]
create-playersB 5 [ set size 2 set color yellow set shape "person" setxy random-xcor random-ycor set label who]
; comment out this code until create-playersA is working properly
; ask playerB 0 [ create-links-with other playersB ]
; ask playerB 2 [ create-link-with playerA 1 ] ;; copy-and-paste error? link with playerB intended?
ask playersA[
set my-list []
set score 0
]
ask playersB[
set my-list []
set score 0
]
reset-ticks
end
to go
let selected nobody
let team-players nobody
let hot-ball nobody
set selected one-of turtles with [
breed = playersA
;; or breed = playersB ;; always select one of playersA for debugging this code
]
print ( word "At point 1, we selected turtle " [who] of selected " with breed " [breed] of selected)
;; we're still in the observer context here
ifelse [breed = playersA] of selected [ ;; by mentioning breed, we shift into a turtle context silently
print ( word " entering the TRUE part of the if-else statement " )
ask selected [
set size [count link-neighbors] of self
print ( word "at point 2 we set selected player's size to " size )
]
create-balls 1 [
set shape "circle" set size 3 set color blue set label who
set hot-ball who
; hide-turtle ;; for debugging show it so you can click on it and inspect it
print ( word "at point 3 we set created a blue hot-ball with who= " hot-ball )
]
;; it seems you want to update the selected turtle's my-ball variable here with a reference to the ball just created??
print " at point 4 we should set selected agent's my-ball to the ball we just made..."
ask selected [
set new_ball hot-ball
]
print (word " Confirming that selected player got the hot-ball " [new_ball] of selected )
;; ask ball hot-ball [ set hidden? true ]
;; this set of code seems to apply only when selected turtle is one of playersA, so it was moved INSIDE that ask-selected code
;; and put inside another ask selected [ ] context
ask selected [
set team-players link-neighbors with [breed = playersA]
print (word "At point 5, For selected player " who ", here is the team-players agent set :" )
print (sort team-players) ;; using "sort" here just to convert an agent set to a list for display
]
print " ------------- about to ask team-players to update their my-lists and change to triangles ---"
ask team-players [
set shape "triangle" set size 3 ;; to see at a glance that everyone was processed
set my-list lput new_ball my-list
print "... updated one my-list"
]
print " let's confirm that the lists have been updated. Here's the my-lists for playersA "
print map [ i -> [my-list] of i ] sort playersA ;; using "sort" to convert agent-set to a list
print (word "At the end of the go step, we have this many balls: " count balls)
]
;; else we should have breed != playersA
[
error " we should only be looking at one of playersA here for testing" ;; for debugging
]
;; tick
end
Is there a way to have a population of turtles breed / die in sets instead of individually?
For example: Say for each tick I'd like one population of turtles to increase by 5 and another population to decrease by 4.
I think you can do something like this
ifelse your condition come here
[ ask n-of 4 breed_type_1 [ die ]
create-breed_type_2 5
]
[ ask n-of 4 breed_type_2 [ die ]
create-breed_type_1 5
]
I am not sure if my syntax is error-free.
how can i create a dynamic number of breeds at runtime?
I want my user to be able to choose the amount of breeds.
I thought about something like
to setup_breeds
let j 1
while[j <= n_groups][
breed[j]
]
end
where n_groups is the number of breeds whick is taken from a slider.
But unfortunatly i cannot use breed inside a method...
Any ideas?
Thanks!
You need to explicitly declare each breed with the breed keyword, so the short answer is: no, you can't have a dynamic number of breeds.
But do you really need actual NetLogo breeds? The main purpose of having different breeds is to have different variables for each breed. If that is not case, perhaps you can get away with having a group-id turtle variable. To create a certain number of turtles for each of n_groups, you could just do something like:
turtles-own [ group-id ]
to setup
clear-all
let n_groups 10
let n-turtles-per-group 5
foreach n-values n_groups [ ? ] [
create-turtles 10 [ set group-id ? ]
]
ask turtles [ set label group-id ]
; do something with only turtles of, e.g., group 2:
ask turtles with [ group-id = 2 ] [
fd 5
]
end
If you think you really need breeds, edit your question to tell us why, and we'll see if we can find a solution for you.
Side note:
I used foreach n-values n_groups [ ? ] to loop through your n groups. That's the equivalent of:
let i 0
while [ i < n_groups ] [
set i i + 1
]
...but arguably more "NetLogo-ish".