I am trying to install snapd but giving this error.
Operating System - Red Hat Enterprise Linux release 8.6 (Ootpa)
Error:
Problem: package snapd-2.57.6-2.el8.x86_64 requires snapd-selinux = 2.57.6-2.el8, but none of the providers can be installed
- conflicting requests
- nothing provides selinux-policy >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
- nothing provides selinux-policy-base >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I have the same problem. There's a long discussion about this here: https://forum.snapcraft.io/t/trouble-installing-snapd-on-rhel-8/13140/2. It looks like the only way to do it, if you can install all the necessary build tools, is to build from sources, as one of the posts there suggests.(I couldn't do it on my system because it's having subscription management issues.)
I also tried using CR repository, as suggested in the instructions for CentOS here: https://snapcraft.io/docs/installing-snap-on-centos, but that didn't work for me, either (I guess it's really just for CentOS and not RHEL).
UPDATE:
I finally found a solution (where there's a will...)! I manually installed all the requirements, one by one, that weren't available in the epel-release repo. My process was the following:
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-4.14.3-19.el8.x86_64.rpm
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-libs-4.14.3-19.el8.x86_64.rpm
wget https://dl.rockylinux.org/pub/rocky/8/BaseOS/aarch64/os/Packages/s/selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libsemanage-2.9-9.el8.x86_64.rpm --allowerasing -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-2.9-19.el8.x86_64.rpm -y
sudo rpm -i --force rpm-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force rpm-libs-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-libsemanage-2.9-9.el8.x86_64.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-policycoreutils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-python-utils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/selinux-policy-minimum-3.14.3-108.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libseccomp-2.5.2-1.el8.x86_64.rpm -y
sudo yum install https://download-ib01.fedoraproject.org/pub/epel/8/Everything/x86_64/Packages/s/snapd-selinux-2.57.6-2.el8.noarch.rpm -y
sudo yum install snapd -y
sudo yum update snapd -y
It's conceivable that on your system something else will be missing. If you run into an error telling you that nothing provides package XYZ, you can find it here: https://centos.pkgs.org/8-stream/centos-baseos-x86_64/ and simply sudo yum install directly from the binary package URL; e.g.:
That's exactly what my process was, and here's what I have now:
$ cat /etc/redhat-release (base)
Red Hat Enterprise Linux release 8.2 (Ootpa)
$ snap --version (base)
snap 2.57.6-2.el8
snapd 2.52.1
series 16
rhel 8.2
kernel 4.18.0-193.6.3.el8_2.x86_64
I want to try new PostgreSQL and follow this instruction. But installation fails:
$ sudo apt install postgresql-client-13
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
postgresql-client-13 : Depends: libpq5 (>= 13~beta2) but 12.3-1.pgdg18.04+1 is to be installed
E: Unable to correct problems, you have held broken packages.
I also tried this instruction to resolve unmet dependencies
What did I wrong and how to install psql 13?
UPD
Content of my sources.list.d:
kes#kes-X751SA /etc/apt/sources.list.d $ cat pgdg.list
deb http://apt.postgresql.org/pub/repos/apt/ bionic-pgdg main
kes#kes-X751SA /etc/apt/sources.list.d $ cat pgdg-testing.list
deb http://apt.postgresql.org/pub/repos/apt/ bionic-pgdg-testing main 13
Also:
$ sudo apt-cache policy postgresql-13
postgresql-13:
Installed: (none)
Candidate: 13~beta2-1.pgdg18.04+1
Version table:
13~beta2-1.pgdg18.04+1 100
100 http://apt.postgresql.org/pub/repos/apt bionic-pgdg-testing/13 amd64 Packages
Had the same problem.
in /etc/apt/sources.list.d/pgdg.list where you have
deb http://apt.postgresql.org/pub/repos/apt/ focal-pgdg main
change it to
deb http://apt.postgresql.org/pub/repos/apt/ focal-pgdg main 13
then run
sudo apt update
and then you can do
sudo apt install postgresql-13 postgresql-client-13
that worked on my machine.
Just FYI:
WARNING: The data format may change between beta releases. Be prepared
to pg_dump the database contents before you upgrade the package to a
newer beta or to a final release. Check the release notes before
upgrading.
try aptitude instead of apt-get
sudo apt-get install aptitude
sudo aptitude install <package-name>
https://askubuntu.com/a/1056378/1087086
Finally at my docker container I do next commands:
RUN yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
RUN yum -y install llvm5.0-devel
RUN yum -y install centos-release-scl-rh
RUN yum -y install llvm-toolset-7-clang
#RUN rpm -Uvh https://yum.postgresql.org/11/redhat/rhel-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm --replacepkgs
#RUN yum-config-manager --enable pgdg13-updates-testing
RUN yum -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm
RUN yum -y install postgresql13 postgresql13-devel
Commented out lines were for case before 13.1 was released
I am attempting to install the latest PostGIS 3.0.x on CentOS 8, with no luck.
I don't think anyone is running PostGIS on RHEL 8 or CentOS 8, I can't understand why not. It does not seem possible to install.
I have successfully installed Postgres 12.0 by disabling the RHEL AppStream
Steps I took installing postgres 12 on CentOS 8:
1)
#dnf install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
2)
#dnf --disablerepo AppStream install postgresql12
#dnf --disablerepo AppStream install postgresql12-server
I am attempting now to install PostGIS.
#dnf list --available | grep postgis30
I see that postgis30_96 is the latest offered (as listed below):
postgis30_96.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-client.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-client-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-devel.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-docs.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-gui.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-gui-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-utils.x86_64 3.0.0alpha4-6.rhel8 pgdg96
When I try to install with the following command:
#dnf install postgis30_96
I get these errors:
Last metadata expiration check: 1:22:58 ago on Tue 15 Oct 2019 08:25:10 PM UTC.
Error:
Problem: cannot install the best candidate for the job
- nothing provides hdf5 needed by postgis30_96-3.0.0alpha4-6.rhel8.x86_64
- nothing provides xerces-c needed by postgis30_96-3.0.0alpha4-6.rhel8.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I look for xerces-c, and nothing is returned:
#dnf list --available | grep xerces-c
Where do I get xerces-c to install?
I look to see if hdf5 is available to install (dependency)
#dnf list --available | grep hdf5
and nothing is returned. How do I satisfy these dependencies, so that PostGIS will install?
I goto the hdf5 website, download the source and it's a BIG FAT MESS. The build/install instructions do not work - the code is out of sync with the install instructions.
I check the hdf5 website and find another set of build/install instructions, and they too are out of sync with the latest code base. I don't know which way is up with this project, if it's a zombie project out there on the web, seemingly alive, but nobody's home.
How do I get hdf5 easily onto my system and xerces-c so that nothing existing gets mucked up? I would prefer to install these through any somewhat sanctioned CentOS 8 package repo using dnf.
I can't log this issue on the PostGIS ticket tracking system. Logging a ticket there requires an OSGEO ID, and when I request a 'mantra' to get started, nothing is returned, no response,
OSGEO is yet another zombie project, nobody's home. https://www.osgeo.org/community/getting-started-osgeo/osgeo_userid/
Please respond only if you have actually done this yourself on a CentOS 8 machine or VM, while I appreciate suggestions, pointers or imaginations from others, it pollutes r/postgis reddit with misinformation, non-working solutions, and not only wastes my time with dead ends, but also the time of others.
Someone else inevitably comes along with the same problems and is misguided with these those that are well-intentioned, but provide incorrect or incomplete information.
I had the same problem and finally found the solution. I need postgis25 for postgresql10, so I typed this command
dnf --enablerepo=PowerTools install postgis25_10
The PowerTools repo has the packages from codeready-developer repo, from Redhat CodeReady Studio. It contains a lot of useful tools.
Cannot enable PowerTools for RHEL 8
https://access.redhat.com/discussions/5417621
Remarks: PowerTools is a CentOS repository. On RHEL 8 we have the CodeReady Builder repository!
I am now able to install PostGIS-3 for PostgreSQL-12 on RHEL-8.
Solution:
sudo subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
dnf install postgis30_12
Summing up the previous answers, these are the commands needed to install PostGIS-3 on CentOS-8:
dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
dnf -qy module disable postgresql
yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
dnf --enablerepo=PowerTools install postgresql12-server postgresql12-contrib postgis30_12
Many of the answers were helpful. To sum up the steps I had to take and errors in the instructions at https://people.planetpostgresql.org/devrim/index.php?/archives/107-Installing-PostGIS-3.1-and-PostgreSQL-13-on-CentOS-8.html
As mentioned by Marcelo, for RHEL use code-ready, not powertools.
As mentioned in this thread, don't mix packages. Run dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
to get the pgdg repo before installing postgres. Then run dnf -qy module disable postgresql if needed then install postgres like sudo dnf install -y postgresql13-server
The command to install epel-repo listed here may not work. Try sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
Get the name of the latest postgis release with this command. sudo dnf list --available | grep postgis3 As mentioned by Nick, the second two digits are your postgres version.
Install postgis sudo dnf -y install postgis3x_xx I repeat, the second two digits are your postgres version.
So, in summary, to install postgres and postgis on my rhel8 sytstem, I ran these commands in this order.
sudo dnf -qy module disable postgresql
sudo dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo dnf install -y postgresql13-server
sudo /usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl enable postgresql-13
sudo systemctl start postgresql-13
sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
sudo dnf -y install postgis31_13
The postgis30_96 packages are for Postgres 9.6. You need postgis30_12 for Postgres 12.
These packages are definitely in the repo, so if your dnf list isn't seeing them, it may be an instance of a known issue in which "yum/dnf refuse to find/install many packages from PGDG repository on RHEL8".
As a workaround, the Postgres Yum Howto recommends this installation procedure:
dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
dnf -qy module disable postgresql
dnf install postgresql11-server postgresql11-contrib
Percona Postgresql 13 And Postgis 3.0
https://www.percona.com/doc/percona-repo-config/index.html
dnf remove postgresql
sudo dnf install https://repo.percona.com/yum/percona-release-latest.noarch.rpm
sudo percona-release setup ppg-13
You can refer here:
https://www.percona.com/doc/postgresql/LATEST/installing.html#using-the-rpm-format
sudo dnf module disable postgresql
sudo dnf install percona-postgresql13-server
sudo dnf install percona-pg_repack13
sudo dnf install percona-pgaudit
sudo dnf install percona-pgbackrest
sudo dnf install percona-patroni
sudo dnf install percona-pg-stat-monitor13
sudo dnf install percona-postgresql13-contrib
/usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl start postgresql-13
PostGIS
dnf -y config-manager --set-enabled PowerTools
dnf install -y postgis30_13 postgis30_13-client
What helped me in CentOS container (as a root):
yum -y install dnf-plugins-core && yum config-manager --set-enabled powertools
Installing dnf-plugins-core and enabling powertools.
I am using DNF package manager for installing rpms on centos 7.x.The rpms are checked out from the svn private repo. DNF is not able to install the rpm if I throw a command
dnf -y install docker-common-{{docker_version}}*.rpm
Whereas if I use rpm command to install the packages,its doing fine
rpm -i docker-common-{{docker_version}}*.rpm,its able to install
Is there any feature in dnf for installing the rpm without specifying whole line of rpm like below:
dnf -y install docker-client-1.12.6-61.git85d7426.el7.centos.x86_64.rpm
You can simply say the rpms are in your current directory with a ./* like:
dnf install ./docker-common-*
After installing rvm on CentOS 5.6 and run rvm notes:
dependencies:
# For RVM
rvm: yum install -y bash curl git # NOTE: For git you need the EPEL repository enabled
# For Ruby (MRI & Ree) you should install the following OS dependencies:
ruby: yum install -y gcc-c++ patch readline readline-devel zlib zlib-devel libyaml-devel libffi-devel openssl-devel ;
yum install -y make bzip2 ;
yum install -y iconv-devel # NOTE: For centos 5.4 final iconv-devel might not be available :(
However iconv-devel cannot be found:
Setting up Install Process
No package iconv-devel available.
Nothing to do
How can I install it?
You don't have to worry about it on CentOS 5.4+ (and some other Red Hat-based systems).
It's already provided in the glibc library:
http://www.kannel.org/pipermail/users/2008-August/005444.html
Error when trying to run gem install