When i Invoke the installer with:
installerchecker_windows-x64_19_2_1_0-SNAPSHOT.exe
-q
-c
-varfile install.varfile
-Dinstall4j.alternativeLogfile=d:/tmp/logs/installchecker.log
-Dinstall4j.logToStderr=true
it creates and writes the standard log file installation.log in the .install4j Directory, but doesnt create my custom log in d:/tmp/logs. As configured there is an additional error.log with the correct content.
The installation.log shows the comand-line config : install4j.alternativeLogfile=d:/tmp/logs/installchecker.log
The Directory d:/tmp/logs has full access.
Where is the failure in my config ?
The alternative log file is intended to debug situations where the installer fails. To avoid moving the log file to its final destination in .install4j/installation.log, the VM parameter
-Dinstall4j.noPermanentLogFile=true
can be specified.
Related
I've placed a docker compose file project.yaml at the location /etc/project/project.yaml
the file and well as the project directory have the same file permission, i.e. -rxwrxxrwx
but when I run docker-compose
sudo docker-compose -f ./project.yaml up -d
if errors out with the following
Cannot find the file ./project.yaml
I have checked various times and it seems there is no permission issue. Can anyone tell why we have this problem and what would be the solution
Beside using the full path, as commented by quoc9x, double-check your current working directory when you call a command with a relative path ./project.yaml
If you are not in the right folder, that would explain the error message.
I have an wget command running, but due to the website it regularly downloads "fake data". So, I am now downloading it dozens of times to get the correct content.
I now want the following:
use the wget command
check if in that directory are files <100kB
if yes ->use robocopy to save the >100kB files to another folder; repeat with wget
if no -> stop
I have the wget command and the robocopy command.
I only need now the function to check if an directory has a file <100kB and how to put this together into an cmd/powershell/bat or whatever.
How would the command for that look like? I have especially no idea how to check the files.
I'm using this article as a source to get me half way there, but I cannot figure out how to run supervisor with a custom config file path.
When I want to run supervisor manually, I just do:
supervisord -c /home/test/_app/supervisord.conf
When I implemented the auto start up script, it runs the default supervisor config file which is located in /etc/ directory. I don't want to use that one because it separates it from the core project folder and makes it hard to maintain and keep track of.
Try this:
In /etc/rc.d/init.d/supervisord, add prog_opts variable like this:
prog_opts=" -c /home/test/_app/supervisord.conf"
prog_bin="${exec_prefix}/bin/supervisord"
Then in start() function, change the call to:
daemon $prog_bin --pidfile $PIDFILE -- $prog_opts
I was able to fix this issue by simply deleting the default supervisord.conf file and then making a sym link with that default location and my custom conf file path.
I am using Pentaho CE 5 on windows. I would like to use CTools but I can't make them show up in the File -> New menu to use them.
Being behind a proxy, I can not use the Marketplace plugin, so I have tried a manual installation.
First, I tried to use the ctools-installer.sh. I have run the following command line in cygwin (wget and unzip are installed):
./ctools-installer.sh -s /cygdrive/d/Users/[user]/Mes\ Programmes/pentaho/biserver-ce/pentaho-solutions/ -w /cygdrive/d/Users/[user]/Mes\ programmes/pentaho/biserver-ce/tomcat/webapps/pentaho/
The script starts, asks me what module I want to install, and begins the downloads.
For each module, I get an output like (set -x added to the script) :
echo -n 'Downloading CDF...' Downloading CDF...+ wget -q --no-check-certificate 'http://ci.analytical-labs.com/job/Webdetails-CDF-5-Release/lastSuccessfulBuild/artifact/bi-platform-v2-plugin/dist/zip/dist.zip'
-O .tmp/cdf/dist.zip SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = C:\Program Files (x86)\GnuWin32/etc/wgetrc
'[' '!' -z '' ']'
rm -f .tmp/dist/marketplace.xml
unzip -o .tmp/cdf/dist.zip -d .tmp End-of-central-directory signature not found. Either this file is not a zipfile, or it
constitutes one disk of a multi-part archive. In the latter case
the central directory and zipfile comment will be found on the last
disk(s) of this archive. unzip: cannot find zipfile directory in
.tmp/cdf/dist.zip,
and cannot find .tmp/cdf/dist.zip.zip, period.
chmod -R u+rwx .tmp
echo Done Done
Then the script ends. I have seen on this page (pentaho-bi-suite) that it is the normal output. Nevertheless, it seems a bit strange to me and when I start my pentaho server (login: admin/password), I cannot see any new tools in the menus.
After a look to a few other tutorials and the script itself, I have downloaded the .zip snapshots for every tool and unzipped them in the system directory of my pentaho server. Same result.
I would like to make the .sh works, what can I try or adjust ?
Thanks
EDIT 05/06/2014
I checked the dist.zip files dowloaded by the script and they are all empty. It seems that wget cannot fetch the zip files, and therefore the installation fails.
When I try to get any webpage through wget, it fails. I think it is because of the proxy.
Here is my .wgetrc file, located in my user's cygwin home folder:
use_proxy=on
http_proxy=http://[url]:[port]
https_proxy=http://[url]:[port]
proxy_user=[user]
proxy_password=[password]
How could I make this work?
EDIT 10/06/2014
In the end, I have changed my network connection settings to bypass the proxy. It seems that there is an offline mode for the installer, so one can download all needed files on a proxy-free environment and then run the script offline.
I guess this is related with the -r option.
I consider this post solved, since it not a CTools issue anymore.
Difficult to identify the issue in the above procedure..
but you can refer this blog he is key member of pentaho itself..
In the end, I have changed my network connection settings to bypass the proxy. It seems that there is an offline mode for the installer, so one can download all needed files on a proxy-free environment and then run the script offline. I guess this is related with the -r option.
I consider this post solved, since it is not a CTools issue anymore.
You can manually install the components from http://www.webdetails.pt/ctools/ or if you have pentaho 5.1 or above, you add the following parameters to CATALINA_OPTS option (in start-pentaho.bat or start-pentaho.sh):
-Dhttp.proxyHost= -Dhttp.proxyPort= -Dhttp.nonProxyHosts="localhost|127.0.0.1|10...*"
http://docs.treasuredata.com/articles/pentaho-dataintegration#tips-how-can-i-use-pentaho-through-a-proxy
The Ruby Devkit is a 7-zip based self-extracting archive.
I would like to invoke it silently without having to install 7-Zip to extract the files to a folder of my choosing, so that I can script the installation. I imagine it to be something like:
cmd> DevKit-tdm-32-4.5.2-20111229-1559-sfx.exe /silent /dir="C:\DevKit"
But that, of course, doesn't work. What command line flags must I use to silently extract this archive into a folder of my choice?
try this:
C:\> DevKit-tdm-32-4.5.2-20111229-1559-sfx.exe -o"C:\DevKit" -y
Update 2017: The tool from 7zsfx.info is now dead and gone.
Original, old post from 08-2015:
If you are trying to extract an 7zip SFX (http://7zsfx.info/) archive:
sfx.exe -y -gm2 -InstallPath="C:\\your\\target\\path"
Switches Docu
-y hide some prompts
-gm2 hides the extraction dialog completely (silent mode)
-InstallPath sets the target path (you need double backslashes)
7z SFX Guide
The official way to create a SFX package is to use -sfx[{name}] : Create SFX archive.
And that means the created SFX packages uses two kinds of CLI options:
official CLI options from 7zSFX, and
the passed through options you configured in your config, before creating the package.
You can think of it as parameter forwarding to the packaged executable. This parameter forwarding depends on the SetEnvironment and RunProgramm configuration!
The full process:
Create archive Package.7z:
containing Installer.msi and additional crap.cab file.
Create config file config.txt:
;!#Install#!UTF-8!
Title="Installation"
SetEnvironment="strInstall=hidcon:Installer.msi /qn"
RunProgram="%strInstall%"
;!#InstallEnd#!
Now we generate Test.exe by combining sfx+config+archive into an executable.
copy /b 7zS.sfx + config.txt + Package.7z SfxInstaller.exe
Note: 7zS.sfx is from the official 7zip extra package.
Now, when you run SfxInstaller.exe you can pass for instance /lv InstallerLog.txt to create a install log, e.g.
SfxInstaller.exe /lv InstallerLog.txt
Since 7-zip is used, simply create a self-extracting archive in .exe. and run it with switches -o and -y.
I use it to save space on USB drive. For instance, I run VDiskAir application infrequently. I create a self-extracting archive of the VDiskAir program folder (about 15MB):
7z a -SFX -mx9 VDiskAir.exe [VDiskAir folder path]
NB: -mx9 is used here to maximise compression.
I create a DOS BAT to run the self-extracting VDiskAir.exe (about 5MB) created, save it as VDiskAir.bat containing:
VDiskAir.exe -o%TMP% -y
%TMP%\VDiskAir\VDisk_Air.exe
I'm not worried that the VDiskAir folder (in %TMP% extracted with VDiskAir program files) is undeleted after running VDiskAir this way, since I have a BAT script to clear %TMP% on shutting down/starting up.
Below is what I use for Autodesk product:
Start /W %~dp0AutoCAD_2018_French_LP_Win_64bit_dlm.sfx.exe -suppresslaunch -d C:\Autodesk