I am trying to install pgadmin in Red hat 8 by
sudo yum install pgadmin4
However:
No match for argument: pgadmin4
Error: Unable to find a match
Red hat version:
Product Name: Red Hat Enterprise Linux for x86_64
Version: 8.0
Arch: x86_64
Status: Subscribed
You need to add Postgres repository first.
dnf install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
then run following
dnf install pgadmin4
Ref: https://www.postgresql.org/download/linux/redhat/
I don't know if still needed but i had the same problem.
i didn't find pgadmin4 repository on dnf, but it's still available on yum.
you just need to setup this repo :
sudo rpm -i https://ftp.postgresql.org/pub/pgadmin/pgadmin4/yum/pgadmin4-redhat-repo-1-1.noarch.rpm
then install Pgadmin4 with yum :
# Install for both desktop and web modes.
sudo yum install pgadmin4
# Install for desktop mode only.
sudo yum install pgadmin4-desktop
# Install for web mode only.
sudo yum install pgadmin4-web
got this on pgadmin website https://www.pgadmin.org/download/pgadmin-4-rpm/
if it can help
Related
I am attempting to install the latest PostGIS 3.0.x on CentOS 8, with no luck.
I don't think anyone is running PostGIS on RHEL 8 or CentOS 8, I can't understand why not. It does not seem possible to install.
I have successfully installed Postgres 12.0 by disabling the RHEL AppStream
Steps I took installing postgres 12 on CentOS 8:
1)
#dnf install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
2)
#dnf --disablerepo AppStream install postgresql12
#dnf --disablerepo AppStream install postgresql12-server
I am attempting now to install PostGIS.
#dnf list --available | grep postgis30
I see that postgis30_96 is the latest offered (as listed below):
postgis30_96.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-client.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-client-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-devel.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-docs.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-gui.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-gui-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-utils.x86_64 3.0.0alpha4-6.rhel8 pgdg96
When I try to install with the following command:
#dnf install postgis30_96
I get these errors:
Last metadata expiration check: 1:22:58 ago on Tue 15 Oct 2019 08:25:10 PM UTC.
Error:
Problem: cannot install the best candidate for the job
- nothing provides hdf5 needed by postgis30_96-3.0.0alpha4-6.rhel8.x86_64
- nothing provides xerces-c needed by postgis30_96-3.0.0alpha4-6.rhel8.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I look for xerces-c, and nothing is returned:
#dnf list --available | grep xerces-c
Where do I get xerces-c to install?
I look to see if hdf5 is available to install (dependency)
#dnf list --available | grep hdf5
and nothing is returned. How do I satisfy these dependencies, so that PostGIS will install?
I goto the hdf5 website, download the source and it's a BIG FAT MESS. The build/install instructions do not work - the code is out of sync with the install instructions.
I check the hdf5 website and find another set of build/install instructions, and they too are out of sync with the latest code base. I don't know which way is up with this project, if it's a zombie project out there on the web, seemingly alive, but nobody's home.
How do I get hdf5 easily onto my system and xerces-c so that nothing existing gets mucked up? I would prefer to install these through any somewhat sanctioned CentOS 8 package repo using dnf.
I can't log this issue on the PostGIS ticket tracking system. Logging a ticket there requires an OSGEO ID, and when I request a 'mantra' to get started, nothing is returned, no response,
OSGEO is yet another zombie project, nobody's home. https://www.osgeo.org/community/getting-started-osgeo/osgeo_userid/
Please respond only if you have actually done this yourself on a CentOS 8 machine or VM, while I appreciate suggestions, pointers or imaginations from others, it pollutes r/postgis reddit with misinformation, non-working solutions, and not only wastes my time with dead ends, but also the time of others.
Someone else inevitably comes along with the same problems and is misguided with these those that are well-intentioned, but provide incorrect or incomplete information.
I had the same problem and finally found the solution. I need postgis25 for postgresql10, so I typed this command
dnf --enablerepo=PowerTools install postgis25_10
The PowerTools repo has the packages from codeready-developer repo, from Redhat CodeReady Studio. It contains a lot of useful tools.
Cannot enable PowerTools for RHEL 8
https://access.redhat.com/discussions/5417621
Remarks: PowerTools is a CentOS repository. On RHEL 8 we have the CodeReady Builder repository!
I am now able to install PostGIS-3 for PostgreSQL-12 on RHEL-8.
Solution:
sudo subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
dnf install postgis30_12
Summing up the previous answers, these are the commands needed to install PostGIS-3 on CentOS-8:
dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
dnf -qy module disable postgresql
yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
dnf --enablerepo=PowerTools install postgresql12-server postgresql12-contrib postgis30_12
Many of the answers were helpful. To sum up the steps I had to take and errors in the instructions at https://people.planetpostgresql.org/devrim/index.php?/archives/107-Installing-PostGIS-3.1-and-PostgreSQL-13-on-CentOS-8.html
As mentioned by Marcelo, for RHEL use code-ready, not powertools.
As mentioned in this thread, don't mix packages. Run dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
to get the pgdg repo before installing postgres. Then run dnf -qy module disable postgresql if needed then install postgres like sudo dnf install -y postgresql13-server
The command to install epel-repo listed here may not work. Try sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
Get the name of the latest postgis release with this command. sudo dnf list --available | grep postgis3 As mentioned by Nick, the second two digits are your postgres version.
Install postgis sudo dnf -y install postgis3x_xx I repeat, the second two digits are your postgres version.
So, in summary, to install postgres and postgis on my rhel8 sytstem, I ran these commands in this order.
sudo dnf -qy module disable postgresql
sudo dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo dnf install -y postgresql13-server
sudo /usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl enable postgresql-13
sudo systemctl start postgresql-13
sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
sudo dnf -y install postgis31_13
The postgis30_96 packages are for Postgres 9.6. You need postgis30_12 for Postgres 12.
These packages are definitely in the repo, so if your dnf list isn't seeing them, it may be an instance of a known issue in which "yum/dnf refuse to find/install many packages from PGDG repository on RHEL8".
As a workaround, the Postgres Yum Howto recommends this installation procedure:
dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
dnf -qy module disable postgresql
dnf install postgresql11-server postgresql11-contrib
Percona Postgresql 13 And Postgis 3.0
https://www.percona.com/doc/percona-repo-config/index.html
dnf remove postgresql
sudo dnf install https://repo.percona.com/yum/percona-release-latest.noarch.rpm
sudo percona-release setup ppg-13
You can refer here:
https://www.percona.com/doc/postgresql/LATEST/installing.html#using-the-rpm-format
sudo dnf module disable postgresql
sudo dnf install percona-postgresql13-server
sudo dnf install percona-pg_repack13
sudo dnf install percona-pgaudit
sudo dnf install percona-pgbackrest
sudo dnf install percona-patroni
sudo dnf install percona-pg-stat-monitor13
sudo dnf install percona-postgresql13-contrib
/usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl start postgresql-13
PostGIS
dnf -y config-manager --set-enabled PowerTools
dnf install -y postgis30_13 postgis30_13-client
What helped me in CentOS container (as a root):
yum -y install dnf-plugins-core && yum config-manager --set-enabled powertools
Installing dnf-plugins-core and enabling powertools.
I cannot load VSCOde onto my old Toshiba laptop using Fedoa23. I follow the instructions from the web and finally get the message "No package code availale". I have previously installes VSCode on an old computer using Fedora23 but this time it does not work? Where do I go wrong?
Thanks.
Don't know, but this works for me.
You can use these step to install VSCode:
sudo rpm --import https://packages.microsoft.com/keys/microsoft.asc
sudo sh -c 'echo -e "[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc" > /etc/yum.repos.d/vscode.repo'
Then update the package cache and install the package using dnf (Fedora 22 and above):
dnf check-update
sudo dnf install code
Or on older versions using yum:
yum check-update
sudo yum install code
I have successfully launched new AWS RDS PostgreSQL v10 instance and need to install PostgreSQL v10 client on Amazon Linux EC2 instance.
I have tried to install it with yum, but it cant find the package for v10:
[ec2-user#ip-X-X-X-X ~]$ sudo yum install -y postgresql10
Loaded plugins: priorities, update-motd, upgrade-helper
amzn-main | 2.1 kB 00:00:00
amzn-updates | 2.5 kB 00:00:00
No package postgresql110 available.
Error: Nothing to do
Previously I managed to install PostgreSQL client v9.5 with:
[ec2-user#ip-X-X-X-X ~]$ sudo yum install -y postgresql95
I guess I need to add Postgres yum repository, as mentioned in https://www.postgresql.org/download/linux/redhat/. But what Platform should I choose for Amazon Linux? Red Hat?
You can try to run the following command on your Linux server:
sudo amazon-linux-extras install postgresql10
Packages/Repos which is designed to work of RedHat will work on Amazon Linux also, Amazon Linux is a minimal-install version of RHEL. You may run into compatibility issues if you select old version of Amazon Linux (Amazon linux 1) for the below steps, otherwise it should work fine in the latest version Amazon Linux 2.
Check Amazon Linux version
[ec2-user ~]$ cat /etc/system-release
Amazon Linux release 2.0 (2017.12) LTS Release Candidate
Install RHEL 7 yum repo for PostgreSQL
[ec2-user ~]$ sudo yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-7-x86_64/pgdg-redhat10-10-2.noarch.rpm
[ec2-user ~]$ sudo sed -i "s/rhel-\$releasever-\$basearch/rhel-latest-x86_64/g" "/etc/yum.repos.d/pgdg-10-redhat.repo"
Install PostgreSQL Client v10
[ec2-user ~]$ sudo yum install -y postgresql10
[ec2-user ~]$ psql --version
psql (PostgreSQL) 10.3
Read more about Amazon Linux 2
Note! Amazon Linux 2 provides additional package installation through Amazon Linux Extras Repository (amazon-linux-extras) ((client only)). Since postgresql10 is not yet available, adding extra yum repo is the only solution per today.
UDATE 2019May
those who see
Error: Package: pgdg-redhat-repo-42.0-4.noarch
(/pgdg-redhat-repo-latest.noarch)
Requires: /etc/redhat-release
may still install step by step all dependencies and the server with:
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-libs-10.7-2PGDG.rhel7.x86_64.rpm
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-10.7-2PGDG.rhel7.x86_64.rpm
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-server-10.7-2PGDG.rhel7.x86_64.rpm
Since none of the previous answers worked for me, I'm adding a solution that let me install the postgresql10 client. We're using VERSION="2018.03" of Amazon Linux AMI in our pipelines.
Building from source:
Note: The link below points to postgresql 10.4, you may want to check for newer subversions
sudo yum install -y gcc readline-devel zlib-devel
wget https://ftp.postgresql.org/pub/source/v10.4/postgresql-10.4.tar.gz
tar -xf postgresql-10.4.tar.gz
cd postgresql-10.4
./configure
make -C src/bin
sudo make -C src/bin install
make -C src/include
sudo make -C src/include install
make -C src/interfaces
sudo make -C src/interfaces install
make -C doc
sudo make -C doc install
The new package should be installed with all its executables in here: /usr/local/pgsql/bin
Now, keep in mind that commands psql, pg_dump etc. still point to the old version of the psql client. You can run with the full executable paths (/usr/local/pgsql/bin/psql) or prepend the new directory at the beginning of your $PATH so that the system will look it up first:
Edit ~/.bash_profile adding this at the end:
export PATH="/usr/local/pgsql/bin:$PATH"
Then run:
source ~/.bash_profile
Now everything should be ready:
[ec2-user#ip-xx-x-x-xxx ~]$ psql --version
psql (PostgreSQL) 10.4
Adapting Haneef Mohammed's answer for Amazon Linux 1 (tested on 2018.03):
Go to the Postgres repositories page and grab the URL for 'Red Hat Enterprise Linux 6 - x86_64'. Install the PG repos and amend the entries, replacing '$releasever' with '6.9' (or newer?):
[ec2-user ~]$ sudo yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-6-x86_64/pgdg-redhat10-10-2.noarch.rpm
[ec2-user ~]$ sudo sed -i "s/rhel-\$releasever-\$basearch/rhel-6.9-x86_64/g" "/etc/yum.repos.d/pgdg-10-redhat.repo"
Second part is the same:
[ec2-user ~]$ sudo yum install -y postgresql10
[ec2-user ~]$ psql --version
psql (PostgreSQL) 10.3
PGDG repo is no longer available for Amazon Linux. So you can use amazon repo.
amazon-linux-extras install postgresql10 vim epel -y
Or follow this article
https://installvirtual.com/install-postgresql-10-on-amazon-ec2/
As of May 25th, 2019, the following direct RPM installation worked for me on Amazon Linux 1 2018.03 (latest Beanstalk platform version) to install PostgreSQL Client 10.7:
sudo rpm -ivh --force https://yum.postgresql.org/testing/10/redhat/rhel-6-x86_64/postgresql10-libs-10.7-2PGDG.rhel6.x86_64.rpm
sudo rpm -ivh --force https://yum.postgresql.org/testing/10/redhat/rhel-6-x86_64/postgresql10-10.7-2PGDG.rhel6.x86_64.rpm
PSql10.7 installation (08/20/2019)
Remove all of the older version Psql client and perform the below steps:
wget https://yum.postgresql.org/10/redhat/rhel-6.9-x86_64/postgresql10-libs-10.7-1PGDG.rhel6.x86_64.rpm
wget https://yum.postgresql.org/10/redhat/rhel-6.9-x86_64/postgresql10-10.7-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql10-libs-10.7-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql10-10.7-1PGDG.rhel6.x86_64.rpm
This my 2019 solution:
Just do
sudo amazon-linux-extras install postgresql9.6
You should not have to download it from any outside source, since it is already given to you by default from Amazon, all you have to do is install it.
The other solutions didnt work for me and I spent a good amount time banging my head against the wall trying to figure out why.
And surprisingly even though you install psql9.6 you get version 10.
The following works for psql v11 on Amazon Linux (v1)
wget https://yum.postgresql.org/11/redhat/rhel-6.9-x86_64/postgresql11-libs-11.8-1PGDG.rhel6.x86_64.rpm
wget https://yum.postgresql.org/11/redhat/rhel-6.9-x86_64/postgresql11-11.8-1PGDG.rhel6.x86_64.rpm
sudo yum clean all
sudo rpm -ivh postgresql11-libs-11.8-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql11-11.8-1PGDG.rhel6.x86_64.rpm
The way I resolved the issue was by running
yum clean all
before
yum install -y postgresql10
on Amazon Linux
for v11 on Amazon Linux 2 I had to do
yum -y install https://download.postgresql.org/pub/repos/yum/11/redhat/rhel-7-x86_64/pgdg-centos11-11-2.noarch.rpm
sed -i "s/rhel-\$releasever-\$basearch/rhel-7-x86_64/g" "/etc/yum.repos.d/pgdg-11-centos.repo"
I am trying to install msodbcsql v13 in redhat 6.3. It shows dependency error for unixODBC(64 bit) >= 2.3.1 needs to be installed before installing msodbcsql.
I tried running below command,
odbcinst -j
It shows unixODBC 2.3.2 is installed.
Also i tried to some other way,
yum provides /usr/lib64/odbcinst.so.2.0.0
The above command shows, ODBC version 2.2 is installed.
Also if i run yum local install, it shows unixODBC 32 bit version available in machine.
To remove unixODBC, i tried the below commands. But not works out.
yum remove unixODBC
yum erase unixODBC
rpm -e unixODBC*
rpm rpm -qa | grep unixODBC
I want to remove all unixODBC available in the machine. And reinstall the actual version which we required.
Manual Installation
Remove any older installed version of unixODBC (for example, unixODBC 2.2.11). On Red Hat Enterprise Linux 5 or 6, execute the following command: yum remove unixODBC. On SUSE Linux Enterprise, zypper remove unixODBC.
Go to http://www.unixodbc.org. Click the Download link on the left side of the page to go to the download page. Then click the appropriate link to save the file unixODBC-2.3.0.tar.gz to your computer. UnixODBC-2.3.1 is not supported with this release of the Microsoft ODBC Driver 11 for SQL Server.
On your Linux computer, execute the command: tar xvzf unixODBC-2.3.0.tar.gz.
Change to the unixODBC-2.3.0 directory.
At a command prompt, execute the command: CPPFLAGS="-DSIZEOF_LONG_INT=8".
At a command prompt, execute the command: export CPPFLAGS.
At a command prompt, execute the command: "./configure --prefix=/usr --libdir=/usr/lib64 --sysconfdir=/etc --enable-gui=no --enable-drivers=no --enable-iconv --with-iconv-char-enc=UTF8 --with-iconv-ucode-enc=UTF16LE".
At a command prompt (logged in as root), execute the command: make.
At a command prompt (logged in as root), execute the command: make install.
For additional info - visit the site
To remove all unixODBC related packages, run:
sudo yum remove unixODBC*
To install newer version of unixODBC, try to install unixODBC-utf16 package.
Here are the suggested commands:
curl -s https://packages.microsoft.com/config/rhel/7/prod.repo | sudo tee /etc/yum.repos.d/msprod.repo
sudo yum update
sudo yum info unixODBC*
sudo yum install unixODBC-utf16
See also: Install the SQL Server command-line tools on Linux.
If above won't help, check: How to install Microsoft Drivers for PHP for SQL Server on Amazon Linux AMI.
Ubuntu 16.04 on VirtualBox VM using Vagrant.
Windows 10 host.
Git Bash terminal.
Connected to vagrant up, vagrant ssh.
I have a fresh VM and have installed ruby and rails. I am trying to install postgresql to use for a Ruby on Rails project, but I get the following error:
vagrant#vagrant-ubuntu-trusty-64:~$ sudo apt-get install postgresql postgresql-contrib
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
postgresql : Depends: postgresql-9.6 but it is not going to be installed
postgresql-contrib : Depends: postgresql-contrib-9.6 but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
I've tried various things, and nothing seems to let me install postgres
I was facing same problem in my ubuntu 16.04
but i fixed that problem and it's very simple just follow these step and you will be able to install postgresql 10 in your system :
Add this to your sources.list:
sudo vim /etc/apt/sources.list
deb http://ftp.de.debian.org/debian/ wheezy main non-free contrib
deb-src http://ftp.de.debian.org/debian/ wheezy main non-free contrib
after that add these link to your pgdg.list file if it's not there you have to create and add link and save it.
sudo vim /etc/apt/sources.list.d/pgdg.list
deb http://apt.postgresql.org/pub/repos/apt/ xenial-pgdg main
deb http://apt.postgresql.org/pub/repos/apt/ precise-pgdg main
then update your system
sudo apt-get update
sudo apt-get upgrade
and install that unmet dependencies :
apt-get install ssl-cert
that's it. now Install postgresql using these command
sudo apt-get install postgresql-10
#JosMac pointed out that I am running Ubuntu 14.04 instead of 16.04 as I had thought.
I was still running into similar errors, but I just ended up installing the rails-dev-box (https://github.com/rails/rails-dev-box) way which uses yakkety64, and seems to work.