I am trying to install msodbcsql v13 in redhat 6.3. It shows dependency error for unixODBC(64 bit) >= 2.3.1 needs to be installed before installing msodbcsql.
I tried running below command,
odbcinst -j
It shows unixODBC 2.3.2 is installed.
Also i tried to some other way,
yum provides /usr/lib64/odbcinst.so.2.0.0
The above command shows, ODBC version 2.2 is installed.
Also if i run yum local install, it shows unixODBC 32 bit version available in machine.
To remove unixODBC, i tried the below commands. But not works out.
yum remove unixODBC
yum erase unixODBC
rpm -e unixODBC*
rpm rpm -qa | grep unixODBC
I want to remove all unixODBC available in the machine. And reinstall the actual version which we required.
Manual Installation
Remove any older installed version of unixODBC (for example, unixODBC 2.2.11). On Red Hat Enterprise Linux 5 or 6, execute the following command: yum remove unixODBC. On SUSE Linux Enterprise, zypper remove unixODBC.
Go to http://www.unixodbc.org. Click the Download link on the left side of the page to go to the download page. Then click the appropriate link to save the file unixODBC-2.3.0.tar.gz to your computer. UnixODBC-2.3.1 is not supported with this release of the Microsoft ODBC Driver 11 for SQL Server.
On your Linux computer, execute the command: tar xvzf unixODBC-2.3.0.tar.gz.
Change to the unixODBC-2.3.0 directory.
At a command prompt, execute the command: CPPFLAGS="-DSIZEOF_LONG_INT=8".
At a command prompt, execute the command: export CPPFLAGS.
At a command prompt, execute the command: "./configure --prefix=/usr --libdir=/usr/lib64 --sysconfdir=/etc --enable-gui=no --enable-drivers=no --enable-iconv --with-iconv-char-enc=UTF8 --with-iconv-ucode-enc=UTF16LE".
At a command prompt (logged in as root), execute the command: make.
At a command prompt (logged in as root), execute the command: make install.
For additional info - visit the site
To remove all unixODBC related packages, run:
sudo yum remove unixODBC*
To install newer version of unixODBC, try to install unixODBC-utf16 package.
Here are the suggested commands:
curl -s https://packages.microsoft.com/config/rhel/7/prod.repo | sudo tee /etc/yum.repos.d/msprod.repo
sudo yum update
sudo yum info unixODBC*
sudo yum install unixODBC-utf16
See also: Install the SQL Server command-line tools on Linux.
If above won't help, check: How to install Microsoft Drivers for PHP for SQL Server on Amazon Linux AMI.
Related
I cannot load VSCOde onto my old Toshiba laptop using Fedoa23. I follow the instructions from the web and finally get the message "No package code availale". I have previously installes VSCode on an old computer using Fedora23 but this time it does not work? Where do I go wrong?
Thanks.
Don't know, but this works for me.
You can use these step to install VSCode:
sudo rpm --import https://packages.microsoft.com/keys/microsoft.asc
sudo sh -c 'echo -e "[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc" > /etc/yum.repos.d/vscode.repo'
Then update the package cache and install the package using dnf (Fedora 22 and above):
dnf check-update
sudo dnf install code
Or on older versions using yum:
yum check-update
sudo yum install code
I have successfully launched new AWS RDS PostgreSQL v10 instance and need to install PostgreSQL v10 client on Amazon Linux EC2 instance.
I have tried to install it with yum, but it cant find the package for v10:
[ec2-user#ip-X-X-X-X ~]$ sudo yum install -y postgresql10
Loaded plugins: priorities, update-motd, upgrade-helper
amzn-main | 2.1 kB 00:00:00
amzn-updates | 2.5 kB 00:00:00
No package postgresql110 available.
Error: Nothing to do
Previously I managed to install PostgreSQL client v9.5 with:
[ec2-user#ip-X-X-X-X ~]$ sudo yum install -y postgresql95
I guess I need to add Postgres yum repository, as mentioned in https://www.postgresql.org/download/linux/redhat/. But what Platform should I choose for Amazon Linux? Red Hat?
You can try to run the following command on your Linux server:
sudo amazon-linux-extras install postgresql10
Packages/Repos which is designed to work of RedHat will work on Amazon Linux also, Amazon Linux is a minimal-install version of RHEL. You may run into compatibility issues if you select old version of Amazon Linux (Amazon linux 1) for the below steps, otherwise it should work fine in the latest version Amazon Linux 2.
Check Amazon Linux version
[ec2-user ~]$ cat /etc/system-release
Amazon Linux release 2.0 (2017.12) LTS Release Candidate
Install RHEL 7 yum repo for PostgreSQL
[ec2-user ~]$ sudo yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-7-x86_64/pgdg-redhat10-10-2.noarch.rpm
[ec2-user ~]$ sudo sed -i "s/rhel-\$releasever-\$basearch/rhel-latest-x86_64/g" "/etc/yum.repos.d/pgdg-10-redhat.repo"
Install PostgreSQL Client v10
[ec2-user ~]$ sudo yum install -y postgresql10
[ec2-user ~]$ psql --version
psql (PostgreSQL) 10.3
Read more about Amazon Linux 2
Note! Amazon Linux 2 provides additional package installation through Amazon Linux Extras Repository (amazon-linux-extras) ((client only)). Since postgresql10 is not yet available, adding extra yum repo is the only solution per today.
UDATE 2019May
those who see
Error: Package: pgdg-redhat-repo-42.0-4.noarch
(/pgdg-redhat-repo-latest.noarch)
Requires: /etc/redhat-release
may still install step by step all dependencies and the server with:
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-libs-10.7-2PGDG.rhel7.x86_64.rpm
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-10.7-2PGDG.rhel7.x86_64.rpm
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-server-10.7-2PGDG.rhel7.x86_64.rpm
Since none of the previous answers worked for me, I'm adding a solution that let me install the postgresql10 client. We're using VERSION="2018.03" of Amazon Linux AMI in our pipelines.
Building from source:
Note: The link below points to postgresql 10.4, you may want to check for newer subversions
sudo yum install -y gcc readline-devel zlib-devel
wget https://ftp.postgresql.org/pub/source/v10.4/postgresql-10.4.tar.gz
tar -xf postgresql-10.4.tar.gz
cd postgresql-10.4
./configure
make -C src/bin
sudo make -C src/bin install
make -C src/include
sudo make -C src/include install
make -C src/interfaces
sudo make -C src/interfaces install
make -C doc
sudo make -C doc install
The new package should be installed with all its executables in here: /usr/local/pgsql/bin
Now, keep in mind that commands psql, pg_dump etc. still point to the old version of the psql client. You can run with the full executable paths (/usr/local/pgsql/bin/psql) or prepend the new directory at the beginning of your $PATH so that the system will look it up first:
Edit ~/.bash_profile adding this at the end:
export PATH="/usr/local/pgsql/bin:$PATH"
Then run:
source ~/.bash_profile
Now everything should be ready:
[ec2-user#ip-xx-x-x-xxx ~]$ psql --version
psql (PostgreSQL) 10.4
Adapting Haneef Mohammed's answer for Amazon Linux 1 (tested on 2018.03):
Go to the Postgres repositories page and grab the URL for 'Red Hat Enterprise Linux 6 - x86_64'. Install the PG repos and amend the entries, replacing '$releasever' with '6.9' (or newer?):
[ec2-user ~]$ sudo yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-6-x86_64/pgdg-redhat10-10-2.noarch.rpm
[ec2-user ~]$ sudo sed -i "s/rhel-\$releasever-\$basearch/rhel-6.9-x86_64/g" "/etc/yum.repos.d/pgdg-10-redhat.repo"
Second part is the same:
[ec2-user ~]$ sudo yum install -y postgresql10
[ec2-user ~]$ psql --version
psql (PostgreSQL) 10.3
PGDG repo is no longer available for Amazon Linux. So you can use amazon repo.
amazon-linux-extras install postgresql10 vim epel -y
Or follow this article
https://installvirtual.com/install-postgresql-10-on-amazon-ec2/
As of May 25th, 2019, the following direct RPM installation worked for me on Amazon Linux 1 2018.03 (latest Beanstalk platform version) to install PostgreSQL Client 10.7:
sudo rpm -ivh --force https://yum.postgresql.org/testing/10/redhat/rhel-6-x86_64/postgresql10-libs-10.7-2PGDG.rhel6.x86_64.rpm
sudo rpm -ivh --force https://yum.postgresql.org/testing/10/redhat/rhel-6-x86_64/postgresql10-10.7-2PGDG.rhel6.x86_64.rpm
PSql10.7 installation (08/20/2019)
Remove all of the older version Psql client and perform the below steps:
wget https://yum.postgresql.org/10/redhat/rhel-6.9-x86_64/postgresql10-libs-10.7-1PGDG.rhel6.x86_64.rpm
wget https://yum.postgresql.org/10/redhat/rhel-6.9-x86_64/postgresql10-10.7-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql10-libs-10.7-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql10-10.7-1PGDG.rhel6.x86_64.rpm
This my 2019 solution:
Just do
sudo amazon-linux-extras install postgresql9.6
You should not have to download it from any outside source, since it is already given to you by default from Amazon, all you have to do is install it.
The other solutions didnt work for me and I spent a good amount time banging my head against the wall trying to figure out why.
And surprisingly even though you install psql9.6 you get version 10.
The following works for psql v11 on Amazon Linux (v1)
wget https://yum.postgresql.org/11/redhat/rhel-6.9-x86_64/postgresql11-libs-11.8-1PGDG.rhel6.x86_64.rpm
wget https://yum.postgresql.org/11/redhat/rhel-6.9-x86_64/postgresql11-11.8-1PGDG.rhel6.x86_64.rpm
sudo yum clean all
sudo rpm -ivh postgresql11-libs-11.8-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql11-11.8-1PGDG.rhel6.x86_64.rpm
The way I resolved the issue was by running
yum clean all
before
yum install -y postgresql10
on Amazon Linux
for v11 on Amazon Linux 2 I had to do
yum -y install https://download.postgresql.org/pub/repos/yum/11/redhat/rhel-7-x86_64/pgdg-centos11-11-2.noarch.rpm
sed -i "s/rhel-\$releasever-\$basearch/rhel-7-x86_64/g" "/etc/yum.repos.d/pgdg-11-centos.repo"
I'm trying to install SQL Server vNext on Linux Mint.
when i run setup, I get the following error. any help would be highly appreciated.
Failed to issue method call: No such interface 'org.freedesktop.DBus.Properties'
on object at path /org/freedesktop/systemd1/unit/mssql_2dserver_2eservice
Installing SQL Server on Linux Ubuntu or Linux mint
You should install Microsoft odbc driver on your Linux, when you want to remote to a SQL server on any other operation system or work with sqlcmd (that it's support SQL server instructions).
First of all, you need to be super user:
sudo su
Then, add Microsoft packages repository to your own Linux.
curl https://packages.microsoft.com/keys/microsoft.asc | apt-key add -
Download appropriate package for the OS version
Choose only ONE of the following, corresponding to your OS version
lsb_release -a
Ubuntu 16.04
curl https://packages.microsoft.com/config/ubuntu/16.04/prod.list > /etc/apt/sources.list.d/mssql-release.list
Ubuntu 18.04
curl https://packages.microsoft.com/config/ubuntu/18.04/prod.list > /etc/apt/sources.list.d/mssql-release.list
Ubuntu 19.10, 20.04
curl https://packages.microsoft.com/config/ubuntu/19.10/prod.list > /etc/apt/sources.list.d/mssql-release.list
After that, exit from super user login.
exit
Update your aptitude package list cache.
sudo apt-get update
Install msodbcsql package. This is your Microsoft odbc driver.
sudo ACCEPT_EULA=Y apt-get install msodbcsql17
sudo apt-get install unixodbc-dev
If you want to remotely connect to a SQL server on any other operating system (like windows), you can use only odbc driver. But, if you want to install sql server on your own Linux and using it, you should type this following commands:
# optional: for bcp and sqlcmd
sudo ACCEPT_EULA=Y apt-get install mssql-tools
echo 'export PATH="$PATH:/opt/mssql-tools/bin"' >> ~/.bash_profile
echo 'export PATH="$PATH:/opt/mssql-tools/bin"' >> ~/.bashrc
source ~/.bashrc
ref:
https://learn.microsoft.com/en-us/sql/connect/odbc/linux-mac/installing-the-microsoft-odbc-driver-for-sql-server?view=sql-server-ver15
Removing:
https://dba.stackexchange.com/a/174176
I am using Linux Mint 18. I installed Python 3.5 and 3.6 using apt-get in the terminal. I can open IDLE of Python 2.7 and 3.5 using commands idle and idle3 respectively. How can I access IDLE that comes with Python 3.6?
Try the command idle3.6. python3 and idle3 are still associated with your system Python, which is 3.5.
Simply typing in idle3.6 should work just like carusot42 mentioned. If it doesn't work, perhaps you might want to see if everything else is installed correctly. Here are the steps I followed which worked perfectly fine for me. I am also running Linux Mint 18. The steps that I followed were:
Installed the prerequisites of Python. Do that by typing in the following commands -
sudo apt-get install build-essential checkinstall
sudo apt-get install libreadline-gplv2-dev libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev
Download Python using the following command and extract it (use your desired location) -
cd /usr/src
wget https://www.python.org/ftp/python/3.6.1/Python-3.6.1.tgz
sudo tar xzf Python-3.6.0.tgz
The next step is to compile Python source. To do that type in the commands below-
cd Python-3.6.1
./configure
sudo make altinstall
make altinstall is used to prevent replacing the default Python binary
file /usr/bin/python
You should be good to go. You check your Python version by typing python3.6 -V in the terminal.
Once you do that, type in idle3.6 and then Python 3.6.1 shell should open for you.
The Software Manager in Linux Mint lists the Python Packages and IDLE Packages
separately. After you install Python, go look up the associated IDLE package in the Software Manager and install it. Reboot and it should work fine. It worked for me.
Is it possible to install psycopg2 into a virtualenv when PostgreSQL isn't installed on my development system—MacBook Pro with OS X 10.6?
When I run pip install psycopg2 from within my virtualenv, I received the error shown below.
I'm trying to connect to a legacy database on a server using Django, and I'd prefer not to install PostgreSQL on my development system if possible.
Why not install PostgreSQL?
I received an error when installing PostgreSQL using homebrew. I have Xcode4—and only Xcode4—installed on my MacBook Pro and am thinking it's related to missing gcc 4.0. However, this is a problem for another StackOverflow question.
Update 8:37 AM on April 12, 2011: I'd still like to know if this is possible without installing PostgreSQL on my MacBook Pro. However, I ran brew update and forced a reinstallation of ossp-uuid with brew install --force ossp-uuid and now brew install postgresql works. With PostgreSQL successfully installed, I was able to pip install psycopg2 from within my virtualenv.
Error from pip install psycopg2
$ pip install psycopg2
Downloading/unpacking psycopg2
Running setup.py egg_info for package psycopg2
Error: pg_config executable not found.
Please add the directory containing pg_config to the PATH
or specify the full executable path with the option:
python setup.py build_ext --pg-config /path/to/pg_config build ...
or with the pg_config option in 'setup.cfg'.
Complete output from command python setup.py egg_info:
running egg_info
writing pip-egg-info/psycopg2.egg-info/PKG-INFO
writing top-level names to pip-egg-info/psycopg2.egg-info/top_level.txt
writing dependency_links to pip-egg-info/psycopg2.egg-info/dependency_links.txt
warning: manifest_maker: standard file '-c' not found
Error: pg_config executable not found.
Please add the directory containing pg_config to the PATH
or specify the full executable path with the option:
python setup.py build_ext --pg-config /path/to/pg_config build ...
or with the pg_config option in 'setup.cfg'.
----------------------------------------
Command python setup.py egg_info failed with error code 1
Storing complete log in /Users/matthew/.pip/pip.log
Preliminary Research
Below are the articles I read as preliminary research:
Installing psycopg2 to use Django with PostgreSQL on OS X
Installing psycopg2 on OS X
Using psycopg2 with virtualenv on Ubuntu JauntyLucid
Postgres, psycopg2, virtualenv install hints
apt-get install libpq-dev
helped me on debian squeeze
From comments:
apt-get install python-dev-is-python3
psycopg depends on pg_config command, and if you don't have it, you can't install psycopg.
If system installation is a problem to you, why don't you try compiling PostgreSQL and including generated bin files in your $PATH? Like:
export PATH=/path/to/compiled/postgresql/bin:"$PATH"
pip install psycopg2
brew install postgresql
export LDFLAGS="-L/usr/local/opt/openssl/lib"
export CPPFLAGS="-I/usr/local/opt/openssl/include"
pip3 install psycopg2
apt-get install libpq-dev
helped me in debian squeeze too . After that do pip install psycopg2. I faced problem of pg_config not found problem when i was setting up my environment on heroku , now its working fine .
You need to install the python-dev package in order to make use of python extensions such as psycopg2. I don't know how to install packages in mac but I run the following commands to install a python package on my Ubuntu machine.
sudo apt-get install python-dev
Or
sudo apt-get install python3-dev
if you are using Python3.x.
Once the installation is finished run the following command within your virtual environment.
pip install psycopg2
You don't need the complete PostgreSQL installed: you only need the client side libraries.
I solved it in MAC OSX using :
$ wget https://ftp.postgresql.org/pub/source/v9.5.3/postgresql-9.5.3.tar.bz2
$ tar xfv postgresql-9.5.3.tar.bz2
$ cd postgresql-9.5.3
$ ./configure
$ make
$ cd src/bin/pg_config
$ export PATH=`pwd`:"$PATH"
$ pip install psycopg2
Use pip install psycopg2-binary, it worked for me when pip install psycopg2 wasn't working.
Using the method you described in your April 12th update, I was able to install PostgreSQL(+1). Note that I originally was running Python 2.7.1 (32bit) and homebrew threw several errors and warnings regarding using a 32bit version of Python. I have since switched the 64/32 bit version of 2.7.1 and it works like a champ.
Regarding the pyscopg2, I was able to install it into my virtual environment from source by editing setup.cfg. I set pg_config to correct path inside homebrew's Cellar (pg_config=/usr/local/Cellar/postgresql/9.0.4/bin/pg_config). After saving the changes, I ran python setup.py install with zero issues. It's worth noting that I did not set the Mac's default python setting to 32 bit. I used the new 64 bit from start to finish.
After looking over some of the documentation, I think if I added homebrew's postgresql path to the system path I could have used pip to install it.
Reference:
http://favosdream.blogspot.com/2009/09/make-psycopg2-and-readline-work-in-snow.html
Update 6-8-2011:
While porting a project written on OS X to Windows 7, I found out that I had to install PostgreSQL on Windows as well. This ended up creating another user on my start up screen and other things that I just didn't like. While doing some digging I found Windows drivers for PostgreSQL here. I have since uninstalled the full PostgreSQL and installed the ODBC drivers which, thus far, work great.
To address the original question, after doing a bit more digging I think I found the equivalent ODBC for OS X here. I have not had a chance to try them out, but the concept works very well on Windows 7. I will update this when I get a chance to try them out. Until then, I hope this helps.
All from the above doesn't work for me (OS Catalina 10.15.1)
There was a conflict with classical postgres and homebrew version.
Please delete homebrew version by command
$ brew uninstall postgresql
and then install it from the official website:
$ sudo mkdir -p /etc/paths.d && echo /Applications/Postgres.app/Contents/Versions/latest/bin | sudo tee /etc/paths.d/postgresapp
It is actual for a simple psycopg2 install or django-heroku package.
if you have recently updated python or changed default python (let's say from 3.6 to 3.8). The following code
sudo apt-get install python-dev OR sudo apt-get install python3-dev
will be installing/working for the previous python version.
so if you want this command to work for the recently updated/changed python version try mentioning that specific version like python3.8 in command like
sudo apt-get install python3.8-dev
try above with following
pip install wheel
export PATH=/path/to/compiled/postgresql/bin:"$PATH"
sudo apt-get install libpq-dev
sudo apt-get install python3.x-dev **Change x with your version, eg python3.8**
pip install psycopg2-binary
pip install psycopg2
As I never needed to install postgresql database on this server I installed the following libraries on Ubuntu 14_04 version before running pip install psycopg2 on the same server
apt-get install libpq-dev python-dev
and then executed pip install psycopg2 within virtual env.
Output
Collecting psycopg2
Using cached psycopg2-2.6.1.tar.gz
Building wheels for collected packages: psycopg2
Running setup.py bdist_wheel for psycopg2
Stored in directory: /root/.cache/pip/wheels/e2/9a/5e/7b620848bbc7cfb9084aafea077be11618c2b5067bd532f329
Successfully built psycopg2
Installing collected packages: psycopg2
Successfully installed psycopg2-2.6.1
I know you are asking for development environment but if you are deploying on server say, Heroku.
Just add below line in the requirements.txt of your project.
django-heroku==0.3.1
As this package itself will install the required packages like psycopg2 on server deployment.
Try to specify the version and it'll works, do it inside the venv
pip install psycopg2-binary==2.8.6
based on my experience, apt install libpq-dev then try to install psycopg2 inside venv will fix many issues, however for more information you can refer to this link:
https://www.psycopg.org/docs/install.html