How to create empty line space after every period in a paragraph in LibreOffice Writer as like below:
Original Paragraph:
aaaaaa.bbbbb.cccccc.ddddddd.
Expected Paragraph:
aaaaaa.
bbbbb.
cccccc.
ddddddd.
If it is possible as per my expectation using LibreOffice Writer means guide me to get the above output. Thanks in advance.
Position your cursor at the start of the paragraph in question. Then in the Find & Replace dialog...
Check Regular expressions under "Other options"
Set Find: to \.
Set Replace: to &\n\n
Click the "Replace" button repeatedly until the paragraph changes are complete (Note that the first click will likely just position the cursor at the first '.')
For the whole document, do the same except position your cursor at the start of the document and click the "Replace All" button rather than "Replace".
Related
I have a .json file which is about 600+ lines and it looks like this:
{data0..}
{data1..}
{data2..}
To use it i need to add [ before and ] after to make it an array (no problem)
but i need to add " , " after every row. Is there a function/method to do that faster than manual typing?
Every object contain data in it.
Or anything to make it readble?
Alternatively, and simpler,
Ctrl-A to select all.
Shift-All-I to put a cursor at each line end.
Type your ,.
Press Ctrl-H for the Search-Replace window
In the first line type \n which means new line and make sure the regular expressions button is pushed - it's 3rd in the row and looks like this: .*
In the second line type ,\n - to replace new line with a comma followed by a new line
Push the "replace all" button
Notice: it assumes every JSON object occupies strictly single line
In a file, I wish to replace all "middle" with "medium", I dont' wish to use
:%s:middle:medium:g
I wish to
1. put the focus on the word of "middle"
2. press 'gd' to high light it,
3. and then do something to replace all its appearance(multiple places) into "medium".
What's more, does vim provide that when I replace a word, while typing, all its locations will display the same change?
How to do this, should I use normal mode or visual mode?
First question
You can use :help gn:
* jump to the next occurence of the word under the cursor
`` jump back
cgnmedium<Esc> change it to whatever you want
. repeat change on next occurrence
. repeat change on next occurrence
. repeat change on next occurrence
You can map it if you want:
nnoremap <key> *``cgn
Second question
No but you can google for "multiple cursor vim" if you really want such a feature.
Say you have the following text:
abc
123
abc
456
789
abc
abc
I want to remove all "abc" lines and just keep one. I don't mind sorting. The result should be like this:
abc
123
456
789
If the order of lines is not important
Sort lines alphabetically, if they aren't already, and perform these steps:
(based on this related question: How do I find and remove duplicate lines from a file using Regular Expressions?)
Control+F
Toggle "Replace mode"
Toggle "Use Regular Expression" (the icon with the .* symbol)
In the search field, type ^(.*)(\n\1)+$
In the "replace with" field, type $1
Click ("Replace All").
If the order of lines is important so you can't sort
In this case, either resort to a solution outside VS Code (see here), or - if your document is not very large and you don't mind spamming the Replace All button - follow the previous steps, but in steps 4 and 5, enter these:
(based on Remove specific duplicate lines without sorting)
Caution: Blocks for files with too many lines (1000+); may cause VS Code to crash; may introduce blank lines in some cases.
search: ((^[^\S$]*?(?=\S)(?:.*)+$)[\S\s]*?)^\2$(?:\n)?
replace with: $1
and then click the "Replace All" button as many times as there are duplicate occurrences.
You'll know it's enough when the line count stops decreasing when you click the button. Navigate to the last line of the document to keep an eye on that.
Coming in vscode v1.62 is a command to eliminate duplicate lines from a selection:
Delete Duplicate Lines in the Command Palette
or
editor.action.removeDuplicateLines as a command in a keybinding
(there is no default keybinding for this command)
Here is a very interesting extension: Transformer
Features:
Unique Lines As New Document
Unique Lines
Align CSV
Align To Cursor
Compact CSV
Copy To New Document
Count Duplicate Lines As New Document
Encode / Decode
Filter Lines As New Document
Filter Lines
Join Lines
JSON String As Text
Lines As JSON String Array
Normalize Diacritical Marks
Randomize Lines
Randomize Selections
Reverse Lines
Reverse Selections
Rotate Backward Selections
Rotate Forward Selections
Select Highlights
Select Lines
Selection As JSON String
Sort Lines By Length
Sort Lines
Sort Selections
Split Lines After
Split Lines Before
Split Lines
Trim Lines
Trim Selections
Unique Lines
Removes duplicate lines from the document Operates on selection or
current block if no selection
Unique Lines As New Document
Unique lines are opened in a new document Operates on selection or
current block if no selection
I haven't played with it much besides the "Unique Lines" command but it seems quite nicely done (including attempting a macro recorder!).
To add to #Marc.2377 's reply.
If the order is important and you don't care that you just keep the last of the duplicate lines, simply search for the following regexp if you want to only remove duplicte non-empty lines
^(.+)\n(?=(?:.*\n)*?\1$)
If you also want to remove duplicate empty lines, use * instead of +
^(.*)\n(?=(?:.*\n)*?\1$)
and replace with nothing.
This will take a line and try to find ahead some more (maybe 0) lines followed by the exact same line taken. It will remove the taken line.
This is just a one-shot regex. No need to spam the replace button.
This now also takes the comment of #awk into account, in where the last line has to have a linefeed in order to be identified as a duplicate. This is no longer the case now by excluding the \n from the line to search and adding a $ to the line found.
I just had the same issue and found the Visual Studio Code package "Sort lines". See the Visual Studio Code market place for details (e.g. Sort lines).
This package has the option "Sorting lines (unique)", which did it for me. Take care of any white spaces at the beginning/end of lines. They influence whether lines are considered unique or not.
Install the DupChecker extension, hit F1, and type "Check Duplicates".
It will check for duplicates and ask if you want to remove them.
Try find and replace with a regular expression.
Find:
^(.+)((?:\r?\n.*)*)(?:\r?\n\1)$
Replace:
$1$2
It is possible to introduce some variance in the first group.
If you don't mind some Vim in your VS Code. You can install Vim emulation plugin.
Then you can use vim commands
:sort u
It will sort lines and it will remove duplicates
Sublime Text 3
It has blisteringly fast native permutation functions.
Edit > Permute Lines > Unique or ⇧⌘U, and
Edit > Permute Selections > Unique
Visual Studio Code is my daily driver. But, I keep Sublime Text on standby for these situations.
Not actually in Visual Studio Code, but if it works, it works.
Open a new Excel spreadsheet
Paste the data into a column
Go to the Data tab
Select the column of data (if you haven't already)
Click Remove Duplicates (somewhat in the middle of the bar)
Click OK to remove duplicates.
It is not the best answer, as you specified Visual Studio Code, but as I said: If it works, it works :)
I'm trying to use the multi cursor functionality of vscode on a large(ish) file.
the file is too large to select every line individually with ctrl-alt-up or down. In sublime-text I would select everything and push ctrl-shift-l. Is there a similar thing in vscode. I've tried using a regex search for ^, but that gives me an error stating "Expression matches everything".
The command Selection / Add Cursors to Line Ends altshifti will put a cursor on every line in the current selection. (For mac use optshifti)
Tip: You can pull up the keyboard shortcut reference sheet with ctrlk,ctrls (as in, those two keyboard combos in sequence).
(For mac use cmdk,cmds)
Hold Alt+Shift and select the block. Then press End or Right button.
You get selected individual lines.
I use version VSCode 1.5.3 in Windows.
Hold Alt+Shift+i
Hold Home (fn+-> Mac) for right-most or End for left most(fn+<- Mac)
This feature is actually called split selection into lines in many editors.
Sublime Text uses the default keybinding, CTRLSHIFT L
VSCode uses ALTSHIFTI
For Atom you actually need to edit your keymap to something like this
'.platform-win32 .editor, .platform-linux .editor':
'ctrl-shift-L': 'editor:split-selections-into-lines'
Real Lines vs Display Lines
First we have to understand the difference between Real Lines and Display Lines to completely understand the answer of the question.
When Word Wrap is enabled, each line of text that exceeds the width of the window will display as wrapped. As a result, a single line in the file may be represented by multiple lines on the display.
The easiest way to tell the difference between Real Lines and Display Lines is by looking at the line number in the left margin of the text editor. Lines that begin with a number correspond to the real lines, which may span one or more display lines. Each time a line is wrapped to fit inside the window, it begins without a line number.
Cursor At the Beginning of each Display Lines:
Cursor At the Beginning of each Real Lines:
Answer to the Question
Now that we know the difference between Display Lines and Real Lines, we can now properly answer the actual question.
Hold AltShift and select the text block.
Press Home to put cursor on the beginning of every Display Line.
Press End to put cursor on the end of every Display Line.
Press HomeHome (Home twice) to put cursor on the beginning of every Real Line.
Press EndEnd (End twice) to put cursor on the end of every Real Line.
Please understand that AltShiftI put cursor on the end of every Real Line.
Install the extension Sublime Commands.
[Sublime Commands] Adds commands from Sublime Text to VS Code: Transpose, Expand Selection to Line, Split into Lines, Join Lines.
(Don't forget to add the keybinding(s) from the extensions details page to your keybindings.json)
Doesn't VS Code already have a "split into lines" command?
Yes, yes it does. However it differs from the one in Sublime.
In VS Code, when you split into lines your selection gets deselected and a cursor appears at the end of each line that was selected (except for the last line where the cursor appears at the end of the selection).
In Sublime, when you split into lines a cursor appears at the end of each line (with the same exception as in VS Code) and the selection is divided on each line and "given" to the same line.
I have the same problem, i'm used to Alt + drag to do 'box selections' in visual studio but it does'n work in code.
It seems to be impossible for now to do it differently than by selecting every single line.
However plugins should be supported soon so we will likely see a plugin for this if not implemented directly by microsoft.
From visual studio uservoice forums:
We plan to offer plugin support for Visual Studio Code. Thank you for your interests and look for more details in our blog in the coming weeks. http://blogs.msdn.com/b/vscode.
For the preview we are looking for exactly this type of feedback. Keep it coming.
Sean McBreen – VS Code Team Member
I'm new to n++, but I have been most impressed with this tool so far. I've been trying to record a macro that do a search/replace, but the 'search' part seems to have the initial search text from the recording 'hard-coded' in the macro.
What I want is:
Manually locate the cursor at the beginning of the first line of a fixed format code segment, then Macro actions:
move cursor two lines down
move cursor right x characters
mark charters from pos x to x+n
search and replace all occurrences of the selected text with "{p_'selected text'}"
In an more advanced version, I'd like to add some logic to step 4: only execute the replace part if the # of occurrences are > 1 (e.g. by first adding a count statement, but I'm not sure how to obtain the returned count # from the dialog box)
Is this possible?
While I'm a big fan of Notepad++, this sounds like something I would accomplish with AutoHotKey. You would select the text and copy it to the clipboard. AutoHotKey would read the clipboard, replace the text as you desire, and either replace the clipboard contents, or send it back to your document. Let me know if you would like to go that route.