This question already has answers here:
How can I install packages using pip according to the requirements.txt file from a local directory?
(19 answers)
Closed 3 years ago.
when iam trying to install the requirements.txt file by using pip in command prompt iam getting an error like this
pip install -r requirements.txt
ERROR: Could not open requirements file: [Errno 2] No such file or directory: 'requirements.txt'
Navigate to path where requirement.txt is saved.
cd path (change to directory)
pip install -r requirements.txt
Related
I am trying to figure out how to install python2 on centos9 stream. I am getting the errors below. Any suggestions?
sudo dnf install python2
Last metadata expiration check: 0:04:48 ago on Thu 24 Feb 2022 01:43:10 PM EST.
No match for argument: python2
Error: Unable to find a match: python2
how to install python2 on centos9 stream
You cannot do that from any repo. No available repo / no packages.
Reason: python2.7 had End Of Life two years ago.
Yes, you can, using this method:
If you cannot find a package for your distribution (and you probably should be able to), you can download a single-file executable "AppImage" containing Python 2.7 and the standard library. Just download the file, make it executable, rename it "python2" or create a symlink of that name pointing to the AppImage file, and put it in /usr/local/bin/, and getmail will happily run with it.
For example, on an x86_64 Linux system, you could:
wget https://github.com/niess/python-appimage/releases/download/python2.7/python2.7.18-cp27-cp27m-manylinux1_x86_64.AppImage
sudo install -m 755 python2.7.18-cp27-cp27m-manylinux1_x86_64.AppImage /usr/local/bin/
sudo ln -sr /usr/local/bin/python2.7.18-cp27-cp27m-manylinux1_x86_64.AppImage /usr/local/bin/python2
Source: https://pyropus.ca/software/getmail/documentation.html#python3
anybody can help me figure out why the installation is hanging on 'Generating installed device list' and how to solve it without starting the process all over. I am working on CentOs.
Thanks in advance
I think this happens due to following missing packages:
libstdc++6:i386
libgtk2.0-0:i386
dpkg-dev:i386
ncurses5-compat-libs
python3-pip
libtinfo5
libncurses5
As BKN mentioned, you need to install the missing packages.
To avoid starting all over again, you can do the following:
Check the log: cat ~/.Xilinx/xinstall/*.log
Locate the error message. It should look something like:
2022-01-09 10:53:11,458 DEBUG: n.t:? - Executing script Generating installed device list: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl, -tclargs, /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt]
2022-01-09 12:05:35,319 DEBUG: n.t:? - Unable to run GenerateDevListFileLin, exit code: 130, stdout: , stderr: application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory failure msg:
application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory
2022-01-09 12:05:35,319 DEBUG: n.t:? - Executing script Generating installed device list for Model Composer: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Model_Composer/2021.2/data/xmcGenBoardParts.tcl, -tclargs, /tools/Xilinx/Model_Composer/2021.2/../../Vivado/2021.2, librdi_dsp_tcltasks.so, /tools/Xilinx/Model_Composer/2021.2/data]
The log informs you exactly what the missing package is (in this case it was libtinfo), and also provides you with the script to run after you install the package:
/tools/Xilinx/Vivado/2021.2/bin/vivado -nolog -nojournal -mode batch -source /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl -tclargs /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt
Notes:
Make sure to use the Vivado version (here it was 2021.2) and location (here it was /tools/Xilinx) according to your system.
You may need to run the script in sudo if the the permissions for writing are not available in user mode.
I also encounterd this problem on Archlinux with Vivado 2018.3.
But I just installed the library ncurses5-compat-libs, then the problem is solved.
Perhaps you can solve this by checking the library ncurses5-compat-libs.
Download the tar package instead of the self-extracting bin package
Update the java and python version
sudo apt-get install -y python3-pip
Install Dependencies
sudo apt-get install -y libstdc++6
sudo apt-get install -y libgtk2.0-0
sudo apt-get install -y dpkg-dev
NOTE: Without ibtinfo5 the application will not start and without libncurses5 the simulation will fail
`sudo apt-get install -y libtinfo5 libncurses5`
Restart the system
Untar that Vivado package
tar -xzvf Xilinx_Unified_2021.2_1021_0703.tar.gz
Locate the xsetup file in the package
Install the package in batch mode
./xsetup --agree 3rdPartyEULA,XilinxEULA --batch Install --product "Vivado" --edition "Vivado ML Enterprise" --location "/home/USER"
Once the installation has been successfully completed
Locate the settings64.sh file
./settings64.sh
Locate the cable drivers
cd Vivado/2021.2/data/xicom/cable_drivers/lin64/install_scripts/install_drivers
./install_drivers
Installing Vivado Board Files
Get the board package from the git https://github.com/Digilent/vivado-boards.git
From the vivado-board-master package copy the folder board_files undert /vivado-board-master/new/board_files
Paste the board files to Vivado/2021.2/data/boards
From the vivado-board-master package copy the file Vivado_init.tcl under /vivado-board-master/utility
Paste the file Vivado_init.tcl to the Vivado installation
That's it!! You might not need to do all these steps but that is what I ended up doing and it worked for the two machines where I installed Vivado. The installation took less than one hour.
This was originally edited into the question itself by the OP.
I have problem with activating virtualenv.
I'm working on the server and using SSH secure shell.
My final goal is to activate virtualenv and run the latest version of tensorflow
The following is the command lines:
jeonguyoang#vision6:~$ python3 -m venv tfenv
The virtual environment was not created successfully because ensurepip is not
available. On Debian/Ubuntu systems, you need to install the python3-venv
package using the following command.
apt-get install python3-venv
You may need to use sudo with that command. After installing the python3-venv
package, recreate your virtual environment.
jeonguyoang#vision6:~$ source tfenv/bin/activate
-bash: tfenv/bin/activate: No such file or directory
jeonguyoang#vision6:~$ cd tfenv
jeonguyoang#vision6:~/tfenv$ ls
bin include lib lib64 pyvenv.cfg
jeonguyoang#vision6:~/tfenv$ cd bin
jeonguyoang#vision6:~/tfenv/bin$ ls
python python3
captured image of the commands
I think that there is no activate file.
Maybe re-installing virtualenv is the answer, but I cannot interrupt server settings..
Check if you have python 2 versions of pip and python (python-all & python-pip packages). Venv installs both v2 and v3 versions of python & pip (regardless of python version of venv).
I've been trying to get MP4Box installed on my CentOS 7 box using the following instructions:
...
cd extra_libs
cp -r * /usr/local/src/gpac/extra_lib
cd ..
cd gpac
chmod 755 configure
./configure
make lib
make apps
make install lib
make install
cp bin/gcc/libgpac.so /usr/lib
install -m644 bin/gcc/libgpac.so /usr/local/lib/libgpac.so
chmod +x /usr/local/lib/libgpac.so
ldconfig
Everything works fine until I get to ./configure which gives me an error:
./configure: line 354: gcc: command not found
error: zlib not found on system or in local libs
I've removed and reinstalled ZLIB and still no luck. I'm pretty new to CentOS so I'm not sure if the problem is with MP4Box or my CentOS installation. I did read that is could be a location issue, here is what I get when I run a whereis /usr/include/zlib.h /usr/share/man/man3/zlib.3.gz. Thoughts?
It turns out that gcc was not installed. I did a yum install gcc and that resolved my issue.
I have researched and viewed the post to install luamongo- http://groups.google.com/group/luamongo/browse_thread/thread/1eaa56974614dc90/c91c842e241aa4de#c91c842e241aa4de
But the installation will not work. I already have mongodb-10gen version 2.0.3 and lua5.1 version 5.1.4.10 installed.
How do I download luamongo from https://github.com/moai/luamongo and install it and get it working as an import statement in a lua script to be able to write to a mongo db? Any suggestions would be helpful, nothing I have tried so far or read has been able to help. If more information is needed I will post it. Thanks in advance.
I got this script from a friend of mine which should be helpful:
# Download mongodb and driver
wget http://downloads.mongodb.org/cxx-driver/mongodb-linux-x86_64-v2.0-latest.tgz
wget http://fastdl.mongodb.org/linux/mongodb-linux-x86_64-2.0.2.tgz
# Extract each
tar xvzf mongodb-linux-x86_64-2.0.2.tgz
tar xvzf mongodb-linux-x86_64-v2.0-latest.tgz
# Add mongo bin to PATH
export PATH=$PATH:~/mongodb-linux-x86_64-2.0.2/bin
# Grab dev tools and dependencies (May need to run apt-get update to download all)
sudo apt-get -y install tcsh scons libpcre++-dev libboost-dev libreadline-dev libboost-program-options-dev libboost-thread-dev libboost-filesystem-dev libboost-date-time-dev gcc g++ git lua5.1-dev make
# Grab latest luamongo (will need to add your github ssh key)
git clone git#github.com:moai/luamongo
# Compile mongo driver
cd mongo-cxx-driver-v2.0
sudo scons install
# Install where lua can load it
sudo cp libmongoclient.* /usr/lib