I'm having odd issues trying to use Unity's Text Mesh Pro Input Field UI element. I don't actually know if the layout is causing it though.
I have a scroll view which uses a vertical layout to organize objects under the content object. Each object in the scroll view has a horizontal layout inside it which fits two input fields next to one another so essentially the Scroll view has two columns of input fields.
However I'm getting odd behavior from the input field. When I start typing it won't show the input until I've entered two characters (i.e. I type '0' and it shows nothing then I type another '0' and it will show '00'). Additionally I have some code that automatically populates the input field with default value, below is an example of how I do this:
gameObject.GetComponent<TMP_InputField>().text = numVal.ToString();
However the values never show up, but I can confirm that they are being populated by checking the inspector window while the game is running. Under the TMP_Input Field component, the 'Text' field shows the correct value but I can't see it in the input box.
I'm getting no errors or warnings.
Is it the scroll view or the layered layouts that are confusing the Input Field's script? Something else? Any advice, help, and questions are appreciated.
EDIT:
I've found that it may have something to do with the way the objects are added to the scroll view. The content of the scroll view (which has the vertical layout) get's objects added to it during run time. This is done through instantiating a prefab.
Instantiate(DoubleInputNodePrefab, contentObject.transform);
This prefab object has the horizontal layout and two children, each an input field. If I add this prefab to content window before I run the game it works fine (expect that none of my intended code works since it relies on modularly adding and removing these objects) but I can give input and it looks fine.
WORK AROUND:
I won't consider this a solution but it is a work around I'm going with for now. Using a 'normal' input field rather than a Text Mesh Pro one doesn't create the same issues and works as intended.
Related
I want a button from the command line bar to be visible or invisible depending on whether a record has been selected in the lookup field from the main form or not.
If no record has been selected, then the button should be displayed. Otherwise not.
For this problem, I want to use the Power Fx in PowerApps, but I haven't found a command yet, which shows me the content or something like that of the lookup field. Other field data types like text have worked without problems.
With Javascript, I already managed it without problems, but I would like to do it also in PowerFx if that should work.
Screenshot: https://i.stack.imgur.com/uqDJ6.png
The records come from the Table Company, where the attribute is Companyname.
Commands where I think they might work:
If([Selected Record];true;false);If(IsBlank([Selected Record]);true;false);If(IsBlankOrError([Selected Record]);true;false);If(IsEmpty([Selected Record]);true;false)
I guess there are 2 scenarios:
The Lookup form control element is a Dropdown with a Selected output property. Then your approach would work like If(IsBlankOrError(DataCardValue1.Selected),true,false)
If your form control element is a ComboBox then you could use If(CountRows(DataCardValue1.SelectedItems)>0,true,false) or the above described IsBlankOrError.
I was wondering whats the best way around dynamically hiding some menu items. At the moment I have 6 items just in a matrix layout row. I want to have 3 items aligned left and 3 items alligned right. If one of the items is set to not visible I want it to move accross. I've done something similiar in a horizontal layout and setting the visibility to hidden. I was wondering if this would work with a vertical layout? Having trouble trying to figure out exactly how I would do it as I'm quite new to UI5 xml css and javscript. Any help would be great.
Also I'm having one other issue unrelated to this, I cant seem to bind my json model to my xml fragment, if I use the same code on my normal xml view it prints out the model data. But on my fragment it just prints it like {person>/fullName} any ideas ?
Belongs to your second question.
Maybe your binding was quoted on copy and paste? Check the native XML Code.
If no data are shown (not "{person>/fullName}"), add dependent to connect the models of your view
var oFragment = sap.ui.xmlfragment(sFragment, "fragmentName", this);
oView.addDependent(oFragment);
I have built a bokeh app that allows users to select windows in data and run python code to find and label (with markers) extreme values within these limits. For ease of interaction, I use the box select tool for the range selection. My problem arises when repeating this process for subsequent cases. After markers are placed for the results, they are rendered invisible by setting alpha to zero and another case needs to be chosen. When the new select box includes previous markers, they become visible based on the selection. How do I override this default behavior? Can markers be made unselectable? or can I add code to the customJS to hide them after they are selected?
Thanks in advance for any help!
There are a few possible approaches. If you just want non-selected glyphs to "disappear" visually, you can set a policy to do that as described here:
http://docs.bokeh.org/en/latest/docs/user_guide/styling.html#selected-and-unselected-glyphs
Basically, for bokeh.plotting, pass
nonselection_fill_alpha=0.0,
nonselection_line_alpha=0.0,
as arguments to your plot.circle call or whatever. Or if you are using the low level bokeh.models interface, something like:
renderer.nonselection_glyph = Circle(fill_alpha=0.0, line_alpha=0.0)
But be aware (I think you already are) that the invisible markers are still there, and still selectable if the user happens to draw a box over them with the selection tool.
If you truly want only a subset of the data to be visible and selectable after a selection, I'd say you want to replace the data in the column data source wholesale with the subset in your selection callback.
I created a .PDF file using Adobe Acrobat Pro. The file has several text fields. Using iTextSharp, I'm able to populate all the fields and mail out the .PDF.
One thing is bugging me - some of the next will not "fit" in the textbox. In Adobe, if I type more that the allocated height, the scroll bar kicks in - this happens when font size is NOT set to auto and multi-line is allowed.
However, when I attempt to set the following properties:
//qSize is float and set to 15;
//auto size of font is not being set here.
pdfFormFields.SetFieldProperty("notification_desc", "textsize", qSize, null);
// set multiline
pdfFormFields.SetFieldProperty("notification_desc", "setfflags", PdfFormField.FF_MULTILINE, null);
//fill the field
pdfFormFields.SetField("notification_desc", complaintinfo.OWNER_DESC);
However upon compilation and after stamping, the scroll bar does not appear in the final .PDF.
I'm not sure if this is the right thing to do. I'm thinking that perhaps I should create a table and flood it with the the text but the documentation makes little or no reference to scroll bars....
When you flatten a document, you remove all interactivity. Expecting working scroll bars on a flattened form, is similar to expecting working scroll bars on printed paper. That's why you don't get a lot of response to your question: it's kind of absurd.
When you fill out a rectangle with text, all text that doesn't fit will be omitted. That's why some people set the font size to 0. In this case, the font size will be adapted to make the text fit. I don't know if that's an option for you as you clearly state that the font size must be 15 pt.
If you can't change the font size, you shouldn't expect the AcroForm form field to adapt itself to the content. ISO-32000-1 is clear about that: the coordinates of a text field are fixed.
Your only alternative is to take control over how iText should fill the field. I made an example showing how to do this in the context of my book: MovieAds.java/MovieAds.cs. In this example, I ask the field for its coordinates:
AcroFields.FieldPosition f = form.GetFieldPositions(TEXT)[0];
This object gives you the page number f.page and a Rectangle f.position. You can use these variables in combination with ColumnText to add the content exactly the way you want to (and to check if all content has been added).
I hope you understand that:
it's only normal that there are no scroll bars on a flattened form,
the standard way of filling out fields clips content that doesn't fit,
you need to do more programming if you want a custom result.
For more info: please consult "iText in Action - Second Edition".
I am working on a new project and I am using Joomla version 1.5.22.
I need to display one horizontal search form in the middle of home page and the same search form in vertical style in all other pages but in left position.
So what I did is, I created two template files one for horizontal search(horizontal.php) and other for vertical search (vertical.php) and in mod_modulename.php I tried to load the respective modules based on a certain condition and changed the position left or middle according to it. The positions are changed in the database to get effected in the admin panel.
if(condition) {
modModulenameHelper::changeToVertical($position);//to change position in database to left
require( JModuleHelper::getLayoutPath( 'mod_modulename', 'vertical'));
}
else {
modModulenameHelper::changeToHorizontal($position);//to change position in database to middle
require( JModuleHelper::getLayoutPath( 'mod_modulename', 'horizontal'));
But I am not getting the correct output. It is loading the respective modules based on the condition. But the position is not assigned at first. And if I press Ctrl+F5 or refreshes, the page will be loaded with the desired output.
Why is this happening? Any Solution??
The problem is that you are changing the position after the fact. By the time you are changing the position, Joomla has already assigned the module to a position. It's an order of operations thing.
Instead, why not just use 2 instances of the module? Rather than going through this trouble, simply add a parameter to the module that allows you to select horizontal or vertical, then assign one to the home page menu item and another to the rest of the pages. This would also allow for putting the module in other positions instead of hard coding it in to the module.