I created a .PDF file using Adobe Acrobat Pro. The file has several text fields. Using iTextSharp, I'm able to populate all the fields and mail out the .PDF.
One thing is bugging me - some of the next will not "fit" in the textbox. In Adobe, if I type more that the allocated height, the scroll bar kicks in - this happens when font size is NOT set to auto and multi-line is allowed.
However, when I attempt to set the following properties:
//qSize is float and set to 15;
//auto size of font is not being set here.
pdfFormFields.SetFieldProperty("notification_desc", "textsize", qSize, null);
// set multiline
pdfFormFields.SetFieldProperty("notification_desc", "setfflags", PdfFormField.FF_MULTILINE, null);
//fill the field
pdfFormFields.SetField("notification_desc", complaintinfo.OWNER_DESC);
However upon compilation and after stamping, the scroll bar does not appear in the final .PDF.
I'm not sure if this is the right thing to do. I'm thinking that perhaps I should create a table and flood it with the the text but the documentation makes little or no reference to scroll bars....
When you flatten a document, you remove all interactivity. Expecting working scroll bars on a flattened form, is similar to expecting working scroll bars on printed paper. That's why you don't get a lot of response to your question: it's kind of absurd.
When you fill out a rectangle with text, all text that doesn't fit will be omitted. That's why some people set the font size to 0. In this case, the font size will be adapted to make the text fit. I don't know if that's an option for you as you clearly state that the font size must be 15 pt.
If you can't change the font size, you shouldn't expect the AcroForm form field to adapt itself to the content. ISO-32000-1 is clear about that: the coordinates of a text field are fixed.
Your only alternative is to take control over how iText should fill the field. I made an example showing how to do this in the context of my book: MovieAds.java/MovieAds.cs. In this example, I ask the field for its coordinates:
AcroFields.FieldPosition f = form.GetFieldPositions(TEXT)[0];
This object gives you the page number f.page and a Rectangle f.position. You can use these variables in combination with ColumnText to add the content exactly the way you want to (and to check if all content has been added).
I hope you understand that:
it's only normal that there are no scroll bars on a flattened form,
the standard way of filling out fields clips content that doesn't fit,
you need to do more programming if you want a custom result.
For more info: please consult "iText in Action - Second Edition".
Related
I have read about using VBA to concatenate terms together using VbCrLf; I personally used Ctrl-Enter to create a second line in the caption field in the properties box.
But, after I do my ctrl-enter, it then only shows the first line of my multi-line caption in the datasheet view of my form.
becomes this...
This form is meant to recreate the functionality our owner is looking for from a current excel spreadsheet (the ability to sort on various columns), so I can't just use a report.
Please tell me I'm missing something obvious such as a caption height property value or something. The multiline caption will be very useful to help maintain appropriate column widths for the data.
Whilst you can display multiple lines of content within the datasheet view for a table by increasing the row height of each record, e.g.:
A more appropriate solution might be to use a text box on a form to display the data, where the height of the text box can be predefined in the design of the form, and scroll bars can be displayed:
There is no solution to adjusting column headers in the specific "datasheet" form that I was trying to use. It's a nice quick way that works for 95% of your uses. But, if you need more control (like me and others on the internet) the only solution is to create the form as a "Tabular" form in the form wizard. There are other descriptions of this type of form in Access (just to be confusing).
This is also described as a continuous form likely because that's the form property value toggle when you dive into the details.
It's more work but you have full control over the size, format, etc. of your column headers when creating/designing a tabular form.
I have a Typo3 server. On that I created some different content elements with mask.
In this elements there are often repeating content, like texts or other stuff.
So the editors make a new element in the backend, there they can add a headline and as much text parts as they want.
Often it looks like this:
Thats good, the editor can see a "preview" of the textparts. In this example "Karriere,Partner...". This naming happens automatically.
My Problem is, some times there arent any titles. Its always "No title". As an editor its quite hard to find the right dropdown to edit some stuff, you mostly have to open all dropdowns and search for the right one.
Its look then like this:
In both elements there are some string inputs that are very good for the title.
So my question is, how is mask gonna choose the title? Its not the first string input.
And secondly, can I tell Mask that they have to choose input field XYZ as title?
Heyo
Yes, you can tell Mask which field to use as a title for inline elements (like repeating contents). When you're setting up a new Mask element, right below the "Label" field of the repeated inline element, there is a field "Field that should be used as label for inline element (starting with tx_mask_)". This will be used as the title that is displayed in the backend. In the placeholder of that field, it explicitly says that "If empty, first field is used".
So, if your inline element has a field "my_awesome_header" which you would like to use as the title in the backend, set the above to "tx_mask_my_awesome_header".
I am not certain as to why it does not display anything in your second example. It might be that either the first input field is not a string, or the first input field is a string but it is empty.
I hope this helps. Let me know if you need further clarification.
Edit: Since that question came up, it should be possible to set a static default title to the containing Mask element using mod.wizards.newContentElement.wizardItems.mask.elements.[name of the mask element].tt_content_defValues.header = My awesome static title. As I said in the comments, though: I always give my Mask elements a header field and let editors fill that in.
I had an editable pdf with checkbox, after selection i flatten that pdf. from that flatten pdf i need to read the checkbox selection which is looks like crossmark(X), is there any possibility to read that checkbox selection.
When you flatten a PDF, you take away all interactivity. If you have a check box field in an interactive form, and you flatten that form, the check box field is gone. That is the concept of flattening.
What happens in practice?
A check box field has two appearances. One appearance is Off. This appearance can be a path such as a simple square defined as a rectangle. Another appearance can have any name On, Yes, 1 or whatever is defined in the original form. The corresponding appearance can be the same square as the Off appearance with two extra lines that look like a cross, or the square with a character that looks like a check mark, or whatever was defined in the original form.
When you flatten the form, you throw away the name of the check box field, you throw away the widget annotation that corresponds with the field, and you throw away one appearance state (depending on the value of the check box field). The only thing that is left, is one of the two appearances.
If you no longer have the original form, you have no clue as to what this appearance could look like, hence you have no idea what to look for, nor where to look for a specific appearance.
You say that the appearance looks like a cross mark in your case, but whoever reads this question has no idea if this cross mark is a path that was constructed in graphics state, or a glyph that was added in text state.
Long story short: if you flatten first and then expect to be able to read a field value, your design is seriously flawed.
You have to ask yourself: why do I need to flatten the form? Maybe it's sufficient to make the fields read-only. If that's not sufficient, why don't you add an attachment to the PDF that contains the original field values? There are many different ways to work around your problem.
I would like to rip off Google's design for my Continuous Form. The detail section of the form is set up to display N number of records resulting from a search, and thus cannot be used to create this effect (i think). Everything must go in the header section.
there are 2 primary issues I would like to address in this question:
Two toned background. The header section should have a grey stripe and a white stripe. This stripe needs to extend the full width of the form, which is variable and will depend on the user. (i'm using tabs not pop-ups)
How to right justify certain elements of the header so that they stay close to the right edge, wherever that may fall, just like your account information on Google.
The "Search Results" in the detail section are loaded by setting the form's recordSource to the results of a query defined in VBA, which takes parameters from the search box. The form is continuous.
Any ideas how to hack this into place?
Recent versions of MS Access provide improved form layout features when using the ACCDB database file format.
The screen captures below are based on a form in Access 2010. The second image is after the form width was expanded, but it's scaled down for display on this web page. However you can open those images directly to compare their relative widths.
The grey color is from the form header's Back Color property. The white box is a simple text box whose Back Color is white and Back Style is Normal (not Transparent).
The text box's Horizontal Anchor property is Both, and its Can Grow property is Yes. The other 3 items ("?", "Button 2", and "Button 3") are command buttons. Their Horizontal Anchors are set to Right and their Can Grow properties are No.
The result of those properties is that when the form expands, those command buttons maintain their size are are kept right-aligned within the form. And the text box stretches to fill the remaining available space.
Note this behavior is accomplished without any VBA code.
I think these layout capabilities were introduced in Access 2007 and perhaps refined in 2010.
For the background, use two rectangles with transparent borders, one back color gray, one white. You can size them to the form by using the form's InsideWidth property. For example:
Private Sub Form_Resize()
rect1.Width = Me.InsideWidth
rect2.Width = Me.InsideWidth
End Sub
I would do a similar thing for the buttons/images/etc you want right justified. Set their Left property relative to the form's width:
mySettingsButton.Left = Me.InsideWidth - 300
Keep in mind all the measurements are twips (1440 twips/inch)
I think this is more of a general issue. I would like to use a textfield that gets dynamic data and doesn't stretch more than a given max height. For instance, I have a textfield that, if it gets text that fits in one line, the textfield will be one line height, and i have other elements under it, that will move up with float positioning. Or, if I want a 3 line max height and if the text exceeds that space, then the rest will be trimmed.
I don't want to use java expressions to trim that text, as it is not always accurate. I am new to jasper and I am trying to know if there is any way to do this. I did a lot of searches, but maybe there is something that i missed, and i hope someone can help me. Thank you
I managed to solve this by extending net.sf.jasperreports.engine.fill.TextMeasurer and overriding initialize() method; also I had to extend net.sf.jasperreports.engine.util.AbstractTextMeasurerFactory and override the createMeasurer() method.
Now, whenever I want to have max # of lines, with no overflow, I add a property to that text field (e.g. maxLines) which is being passed to my custom TextMeasurerFactory. I hope this helped you.
We had a similar problem at work with JASPER Reports 4.5, where we had an invoice with a header and a table. We wanted the header to have dynamic height based on the lengths of certain fields (like address, partner name, etc,), but not more than a critical limit, otherwise the header will push the table and thus making a mess by splitting it across multiple pages. Also, the invoice shouldn't exceed 1 page.
We eventually had to move the header in the background section, where we also put a background for the table consisting of vertical lines (so it will extend to the end of an A4 page) and a white opaque square.
This way, if the header exceeds the max height it will go underneath the table's background, cropping the text. This was the desired effect we were looking for.
Sounds crazy, but it worked ...