I'm getting error
EURUSD,H1: OrderSend failed with error #130
I'm new to programming Experts Please guide where I am making mistake?
I have pasted code on here
https://pastebin.com/S2fnSgxFenter code here
Related
I'm getting the following error when I run the simulation.
ERROR: [Common 17-39] 'launch_simulation' failed due to earlier errors.
This project worked fine, but after reinstalling the same Vivado version, I keep getting errors when running the simulation. I have searched and searched several times and places, there are many who end up with this error, but got different suggestions. I honestly do not know what this error means.
The simulation referred me to the behav folder to open the elaborate log for more information about the error.
Here it is:
Vivado Simulator 2017.1
Copyright 1986-1999, 2001-2016 Xilinx, Inc. All Rights Reserved.
Running: C:/Xilinx2017v1/Vivado/2017.1/bin/unwrapped/win64.o/xelab.exe -wto 89ab4d8a8bd74d6d87079040762eb149 --debug typical --relax --mt 2 -L xil_defaultlib -L lib_cdc_v1_0_2 -L proc_sys_reset_v5_0_11 -L fit_timer_v2_0_8 -L secureip -L xpm --snapshot design_1_wrapper_behav xil_defaultlib.design_1_wrapper -log elaborate.log
Using 2 slave threads.
Starting static elaboration
Completed static elaboration
Starting simulation data flow analysis
ERROR: [XSIM 43-3294] Signal EXCEPTION_ACCESS_VIOLATION received.
What could the error 'Signal EXCEPTION_ACCESS_VIOLATION received' mean?
Someone who have tips and advices?
Are you using VHDL 2008 and trying to access a lower level signal in you test bench?
something like
alias CTL_empty is <<signal Inst_VMUX_Top.Inst_Switch_IF.CTL_empty : std_logic>>;
When I try to make decisions based on CTL_empty, my simulation fails
Following Google's instructions to the letter.
This is what I get:
Fatal error: Uncaught GuzzleHttp\Exception\ConnectException: cURL error 28: Connection timed out after 500 milliseconds (see https://curl.haxx.se/libcurl/c/libcurl-errors.html) in C:\xampp\htdocs\ModernMT\vendor\guzzlehttp\guzzle\src\Handler\CurlFactory.php:207 Stack trace: #0 C:\xampp\htdocs\ModernMT\vendor\guzzlehttp\guzzle\src\Handler\CurlFactory.php(162): GuzzleHttp\Handler\CurlFactory::createRejection(Object(GuzzleHttp\Handler\EasyHandle), Array) #1 C:\xampp\htdocs\ModernMT\vendor\guzzlehttp\guzzle\src\Handler\CurlFactory.php(109): GuzzleHttp\Handler\CurlFactory::finishError(Object(GuzzleHttp\Handler\CurlHandler), Object(GuzzleHttp\Handler\EasyHandle), Object(GuzzleHttp\Handler\CurlFactory)) #2 C:\xampp\htdocs\ModernMT\vendor\guzzlehttp\guzzle\src\Handler\CurlHandler.php(45): GuzzleHttp\Handler\CurlFactory::finish(Object(GuzzleHttp\Handler\CurlHandler), Object(GuzzleHttp\Handler\EasyHandle), Object(GuzzleHttp\Handler\CurlFactory)) #3 C:\xampp\htdocs\ModernMT\vendor\guzzlehttp\guzzle\src\Handler\Proxy.php(30): GuzzleH in C:\xampp\htdocs\ModernMT\vendor\guzzlehttp\guzzle\src\Handler\CurlFactory.php on line 207
This happens right after:
# Instantiates a client
$client = new SpeechClient();
Straight from the developers of Google Cloud:
After investigating a bit further, it looks like this is a bug in the google/auth dependency. We just merged a fix, and it should be tagged by the end of the day. You can wait for that (watch this page for v1.11.1), or you could require guzzlehttp/guzzle at ^6.5 to get it working right now. Sorry for the trouble, and thanks for bringing it to our attention!
I am trying to run an example Simulink model provided by Mathworks, but while deploying the model to the Pixhawk flight controller, I am receiving the following error:
Error(s) encountered while building "px4demo_uORBReadWrite":
### Failed to generate all binary outputs.
Caused by:
Validation error(s):
### Validating other build tools ...
Unable to locate build tool "GNU PX4 Archiver": echo
I have followed all the steps to configure the hardware properly, except the last part where I was not able to receive the accelerometer data too. The error received while testing the connection at that time was:
Error reading data from the serial port. Operation timed out before requested data was received.
Can someone explain why I am having this issue?
Thanks
Currently I am trying to follow the MathWorks tutorial 1 to register a TE0720 with a TE0701-6 carrier board in Matlab. I followed the instructions, designed the block design and exported it as advised. Using the Matlab HDL Workflow Advisor I can follow unitl step 4.1 Create Project. Here, I get the following error message:
invalid command name "CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK"
while executing
"CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK {0} CONFIG.PCW_IOPLL_CTRL_FBDIV {30} CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} CONFIG.PCW_IRQ_F2P_INTR {1} CONFIG..."
(procedure "create_root_design" line 49)
invoked from within
"create_root_design """
(file "vivado_custom_block_design.tcl" line 986)
while executing
"source vivado_custom_block_design.tcl"
(file "vivado_create_prj.tcl" line 15)
This is regarding the exported block design in the corresponding *.tlc file.
After deleting the line mentioned in the error, the error persists, but for the following line. This holds true until I deleted all lines following
CONFIG.PCW_IMPORT_BOARD_PRESET {preset}
It seems to me that once the preset for the board is imported, all following commands are seen as invalid. If I put this line in the end of the list though, I get the error
ERROR [Common 17-69] Command failed: Missing name/value pair in -dict argument.
If I remove this line, I get the error
ERROR [BD 41-1811] The interconnect </axi_interconnect_0> is missing a valid master interface connection
ERROR [Common 17-39] 'validate_bd_design' failed due to earlier errors.
Is there a way to fix this or what is the problem here?
EDIT: I am using Vivado 2017.4 from the Vivado HL WebPACK. Could it be that there is a feature not available in this version for rebuilding the project as MATLAB intends to do?
EDIT 2: I started the complete tutorial fresh from scratch again and now I only get the error
ERROR: [BD 41-1811] The interconnect </axi_interconnect_0> is missing a valid master Interface connection
when going throught the HDL Workflow Advisor. As far as I understand the issue, Vivado searches for something to connect the axi_interconnect to. But isn't this the interface port (DUT) as described later in the tutorial (end of step 2 in Register the custom reference design in HDL Workflow Advisor, where the compiled simulink model should be connected?
I am writing a relatively simple app in the Lithium (li3) Framework. I am using MongoDB as the datastore. My MongoDB database is hosted in the cloud - at MongoHQ.
I am getting intermittent errors when trying to post data. At times it will work - but then I will get an error that says the following:
Fatal error: Uncaught exception 'MongoConnectionException' with
message 'connecting to mongodb://USERNAME:PASSWORD#flame.mongohq.com:27052/DATABASENAME failed:
Operation now in progress' in
/Applications/MAMP/htdocs/quizapp/libraries/lithium/data/source/MongoDb.php:257 Stack trace:
#0 /Applications/MAMP/htdocs/quizapp/libraries/lithium/data/source/MongoDb.php(257): Mongo-
>__construct('mongodb://mongo...', Array) #1
/Applications/MAMP/htdocs/quizapp/libraries/lithium/data/Source.php(90):
lithium\data\source\MongoDb->connect() #2
/Applications/MAMP/htdocs/quizapp/libraries/lithium/data/source/MongoDb.php(160):
lithium\data\Source->_init() #3
/Applications/MAMP/htdocs/quizapp/libraries/lithium/core/Object.php(93):
lithium\data\source\MongoDb->_init() #4
/Applications/MAMP/htdocs/quizapp/libraries/lithium/data/Source.php(73): lithium\core\Object-
>__construct(Array) #5
/Applications/MAMP/htdocs/quizapp/libraries/lithium/data/source/MongoDb.php(156):
lithium\data\Source->__construct(Array) #6 /Applications/MAMP/htdocs/quizapp/libra in
/Applications/MAMP/htdocs/quizapp/libraries/lithium/data/source/MongoDb.php on line 263
I am running this on MAMP on a Mac. I have tried to stop and restart Apache - but it does not seem to fix the problem. However, I do seem to connect to MongoDB 1 out of every 10 to 15 attempts. I cannot figure out any trends.
Any help will be greatly appreciated.
Thank you
Nino
I can see two possible issues here:
A firewall, and a description to turn that off is at: https://groups.google.com/forum/#!msg/mongodb-user/9-DYhQWEo0E/B4UsY53S1IwJ
Slow connections — in some cases a connection to a host is too slow. And since version 1.3.4 of the Mongo PHP driver (which li3 uses) there is great control over timeouts. Have a look at the timeout option at http://www.php.net/manual/en/mongoclient.construct.php — you will most likely want to increase that (but make sure you use 1.3.4 or later of the driver).