i dont know why this happening. its working normal before.
but now i cant start mongod service.
after research on google and i cant run /usr/bin/mongod --quiet --config /etc/mongod.conf by manual.
then i decide to create the .service file to run the command on background.
here's file that i write
[Unit]
Description=High-performance, schema-free document-oriented database
After=network.target
[Service]
User=mongodb
ExecStart=/usr/bin/mongod --quiet --config /etc/mongod.conf
[Install]
WantedBy=multi-user.target
i save it on /etc/systemd/system/mongod.service
but when i run systemctl start mongod its show me nothing output.
and i check the status with systemctl status mongod
and give me failed messages. here's detail message:
mongod.service - High-performance, schema-free document-oriented database Loaded: loaded (/etc/systemd/system/mongod.service;
enabled; vendor preset: enabled) Active: failed (Result: exit-code)
since Mon 2019-10-28 10:47:21 UTC; 27s ago Process: 17668
ExecStart=/usr/bin/mongod --quiet --config /etc/mongod.conf
(code=exited, status=1/FAILURE) Main PID: 17668 (code=exited,
status=1/FAILURE)
Oct 28 10:47:21 production.seletra.com systemd[1]: Started
High-performance, schema-free document-oriented database. Oct 28
10:47:21 production.seletra.com systemd[1]: Starting High-performance,
schema-free document-oriented database... Oct 28 10:47:21
production.seletra.com mongod[17668]: 2019-10-28T10:47:21.743+0000 F
CONTROL Failed global initialization: BadValue Invalid or no user
locale set. Please ensure LANG...t correctly. Oct 28 10:47:21
production.seletra.com systemd[1]: mongod.service: main process
exited, code=exited, status=1/FAILURE Oct 28 10:47:21
production.seletra.com systemd[1]: Unit mongod.service entered failed
state. Oct 28 10:47:21 production.seletra.com systemd[1]:
mongod.service failed. Hint: Some lines were ellipsized, use -l to
show in full.
how i can fix it?
or maybe is there any way to manipulated this code /usr/bin/mongod --quiet --config /etc/mongod.conf to run on background?
Related
I am new to MongoDB and trying to install V5 on CentOS 7 Server. I am using the official documentation to install MongoDB from here:https://www.mongodb.com/docs/v5.0/tutorial/install-mongodb-on-red-hat/
When I try to run the MongoDB, I run the following command (as per the spec):
sudo systemctl start mongod
unfortunately, this does not succeed and I get the follow error:
Job for mongod.service failed because a fatal signal was delivered to the control process. See "systemctl status mongod.service" and "journalctl -xe" for details.
The command
systemctl status mongod.service
reveals the following:
mongod.service - MongoDB Database Server
Loaded: loaded (/usr/lib/systemd/system/mongod.service; enabled; vendor preset: disabled)
Active: failed (Result: signal) since Sat 2022-10-22 06:51:02 UTC; 8min ago
Docs: https://docs.mongodb.org/manual
Process: 22590 ExecStart=/usr/bin/mongod $OPTIONS (code=killed, signal=ILL)
Process: 22587 ExecStartPre=/usr/bin/chmod 0755 /var/run/mongodb (code=exited, status=0/SUCCESS)
Process: 22585 ExecStartPre=/usr/bin/chown mongod:mongod /var/run/mongodb (code=exited, status=0/SUCCESS)
Process: 22583 ExecStartPre=/usr/bin/mkdir -p /var/run/mongodb (code=exited, status=0/SUCCESS)
Oct 22 06:51:02 server1.bjmanch.in systemd[1]: Starting MongoDB Database Server...
Oct 22 06:51:02 server1.bjmanch.in systemd[1]: mongod.service: control process exited, code=killed status=4
Oct 22 06:51:02 server1.bjmanch.in systemd[1]: Failed to start MongoDB Database Server.
Oct 22 06:51:02 server1.bjmanch.in systemd[1]: Unit mongod.service entered failed state.
Oct 22 06:51:02 server1.bjmanch.in systemd[1]: mongod.service failed.
And, that's where I am completely stuck from last 3 days.
Any help would be greatly appreciated.
Thanks
I have Replica set running with command "Sudo service mongod start" , i killed all mongod process using "kill" command after that i run replicaSet with (mongod -f /etc/mongod.conf), Now if i tries to run same replicaSet with "sudo service mongod start" after killing them again gives me error.
Output:
sudo service mongod start
Redirecting to /bin/systemctl start mongod.service
Job for mongod.service failed because the control process exited with error code. See "systemctl status mongod.service" and "journalctl -xe" for details.
systemctl status mongod.service:
● mongod.service - High-performance, schema-free document-oriented database
Loaded: loaded (/usr/lib/systemd/system/mongod.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Mon 2018-10-29 12:24:40 PDT; 23s ago
Docs: https://docs.mongodb.org/manual
Process: 4841 ExecStart=/usr/bin/mongod $OPTIONS (code=exited, status=1/FAILURE)
Process: 4838 ExecStartPre=/usr/bin/chmod 0755 /var/run/mongodb (code=exited, status=0/SUCCESS)
Process: 4836 ExecStartPre=/usr/bin/chown mongod:mongod /var/run/mongodb (code=exited, status=0/SUCCESS)
Process: 4831 ExecStartPre=/usr/bin/mkdir -p /var/run/mongodb (code=exited, status=0/SUCCESS)
Main PID: 4558 (code=exited, status=0/SUCCESS)
Oct 29 12:24:40 centos systemd[1]: Starting High-performance, schema-free document-oriented database...
Oct 29 12:24:40 centos mongod[4841]: about to fork child process, waiting until server is ready for connections.
Oct 29 12:24:40 centos mongod[4841]: forked process: 4844
Oct 29 12:24:40 centos mongod[4841]: ERROR: child process failed, exited with error number 1
Oct 29 12:24:40 centos mongod[4841]: To see additional information in this output, start without the "--fork" option.
Oct 29 12:24:40 centos systemd[1]: mongod.service: control process exited, code=exited status=1
Oct 29 12:24:40 centos systemd[1]: Failed to start High-performance, schema-free document-oriented database.
Oct 29 12:24:40 centos systemd[1]: Unit mongod.service entered failed state.
Oct 29 12:24:40 centos systemd[1]: mongod.service failed.
Thanks!
I'm running ec2 instance of os Ubuntu 16.04.
I recently tried to upgrade my mongodb from 3.2 to 3.6.
And I tried to run sudo service mongod start and mongod service failed to start.
Below is the error message.
mongod.service - High-performance, schema-free document-oriented
database
Loaded: loaded (/etc/systemd/system/mongod.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2018-03-05 05:48:12 UTC; 11s ago
Docs: https://docs.mongodb.org/manual
Process: 18587 ExecStartPre=/usr/bin/mkdir -p /var/run/mongodb (code=exited, status=217/USER)
Main PID: 16567 (code=exited, status=100)
Mar 05 05:48:12 ip-172-31-18-34 systemd[1]: Starting High-performance, schema-free document-oriented database...
Mar 05 05:48:12 ip-172-31-18-34 systemd[18587]: mongod.service: Failed at step USER spawning /usr/bin/mkdir: No such proc
Mar 05 05:48:12 ip-172-31-18-34 systemd[1]: mongod.service: Control process exited, code=exited status=217
Mar 05 05:48:12 ip-172-31-18-34 systemd[1]: Failed to start High-performance, schema-free document-oriented database.
Mar 05 05:48:12 ip-172-31-18-34 systemd[1]: mongod.service: Unit entered failed state.
Mar 05 05:48:12 ip-172-31-18-34 systemd[1]: mongod.service: Failed with result 'exit-code'.
And I never edited a single line of default mongod.service file.
How can I fix this issue?
If you have just copied mongod.service file from somewhere you should edit User in [Service] section
Changing ownership of "/var/lib/mongodb" directory worked for me
Command to change ownership:
"sudo chown -R mongodb:mongodb /var/lib/mongodb"
**Old response:**
$ sudo systemctl status mongodb
● mongodb.service - MongoDB Database
Loaded: loaded (/etc/systemd/system/mongodb.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2019-07-31 18:52:49 IST; 17h ago
Docs: https://docs.mongodb.org/manual
Main PID: 13728 (code=exited, status=217/USER)
Jul 31 18:52:49 LAP-LIN-712 systemd[1]: Started MongoDB Database.
Jul 31 18:52:49 LAP-LIN-712 systemd[13728]: mongodb.service: Failed to determine user credentials: No such process
Jul 31 18:52:49 LAP-LIN-712 systemd[13728]: mongodb.service: Failed at step USER spawning /usr/bin/mongod: No such process
Jul 31 18:52:49 LAP-LIN-712 systemd[1]: mongodb.service: Main process exited, code=exited, status=217/USER
Jul 31 18:52:49 LAP-LIN-712 systemd[1]: mongodb.service: Failed with result 'exit-code'.
**New Response:**
$ sudo systemctl status mongodb
● mongodb.service - MongoDB Database
Loaded: loaded (/etc/systemd/system/mongodb.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2019-08-01 11:54:10 IST; 8s ago
Docs: https://docs.mongodb.org/manual
Main PID: 8143 (mongod)
Tasks: 20 (limit: 4915)
CGroup: /system.slice/mongodb.service
└─8143 /usr/bin/mongod --quiet --config /etc/mongod.conf
/usr/bin/mongod - No such process. ---> This error means you have placed the mongod binary in someother path instead of the default one. Try changing the path in mongod.service file and reattempt it using service start mongodb
For me it was solved by commenting "User" and "Group" directives in the service file as described here.
I hope it helps somebody.
I have a RHEL7 server that is part of a Mongo cluster. There are three mongo processes that I would like to be automatically started on system boot. One mongod, one arbiter and one mongos:
/usr/bin/mongod -f /etc/mongo_shard001.conf
/usr/bin/mongod -f /etc/mongoarb.conf
/usr/bin/mongos -f /etc/mongos.conf
I have been trying to create systemd services for these commands i.e
[Unit]
Description=mongo configuration server
After=network.target
[Service]
User=mongod
Group=mongod
ExecStart=/usr/bin/mongod -f /etc/mongoconf.conf
[Install]
WantedBy=multi-user.target
When I try to do sudo systemctl daemon-reload && sudo systemctl start mongoconf, I get this error
● mongoconf.service - mongo configuration server
Loaded: loaded (/etc/systemd/system/mongoconf.service; disabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Thu 2017-02-02 14:38:34 AWST; 20s ago
Process: 5114 ExecStart=/usr/bin/mongod -f /etc/mongoconf.conf (code=exited, status=1/FAILURE)
Main PID: 5114 (code=exited, status=1/FAILURE)
Feb 02 14:38:34 mdb1 systemd[1]: Started mongo configuration server.
Feb 02 14:38:34 mdb1 systemd[1]: Starting mongo configuration server...
Feb 02 14:38:34 mdb1 systemd[1]: mongoconf.service: main process exited, code=exited, status=1/FAILURE
Feb 02 14:38:34 mdb1 systemd[1]: Unit mongoconf.service entered failed state.
Feb 02 14:38:34 mdb1 systemd[1]: mongoconf.service failed.
I have also tried using a forked type with pid file:
[Unit]
Description=mongo configuration server
After=network.target
[Service]
User=mongod
Group=mongod
ExecStart=/usr/bin/mongod -f /etc/mongoconf.conf --pidfilepath /var/lib/mongoconf/pid --fork
Type=forking
PIDFile=/var/run/mongodb/mongoconf/pid
[Install]
WantedBy=multi-user.target
But gives this error
● mongoconf.service - mongo configuration server
Loaded: loaded (/etc/systemd/system/mongoconf.service; disabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Thu 2017-02-02 14:45:36 AWST; 4s ago
Process: 5256 ExecStart=/usr/bin/mongod -f /etc/mongoconf.conf --pidfilepath /var/lib/mongoconf/pid --fork (code=exited, status=1/FAILURE)
Main PID: 5114 (code=exited, status=1/FAILURE)
Feb 02 14:45:36 mdb1 systemd[1]: Starting mongo configuration server...
Feb 02 14:45:36 mdb1 mongod[5256]: about to fork child process, waiting until server is ready for connections.
Feb 02 14:45:36 mdb1 mongod[5256]: forked process: 5258
Feb 02 14:45:36 mdb1 systemd[1]: mongoconf.service: control process exited, code=exited status=1
Feb 02 14:45:36 mdb1 systemd[1]: Failed to start mongo configuration server.
Feb 02 14:45:36 mdb1 systemd[1]: Unit mongoconf.service entered failed state.
Feb 02 14:45:36 mdb1 systemd[1]: mongoconf.service failed.
Starting the mongo config manually works fine and creates the pid file
/usr/bin/mongod -f /etc/mongoconf.conf --pidfilepath /var/lib/mongoconf/pid --fork
The version of mongod I am using is the one from mongodb.com, and I installed it following their install guide.
db version v3.4.1
git version: 5e103c4f5583e2566a45d740225dc250baacfbd7
OpenSSL version: OpenSSL 1.0.1e-fips 11 Feb 2013
allocator: tcmalloc
modules: none
build environment:
distmod: rhel70
distarch: x86_64
target_arch: x86_64
from this repo
[mongodb-org-3.4]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/3.4/x86_64/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-3.4.asc
I am wondering if I am going about this the wrong way, is there a better way to do this?
I know you said rhel7 but since it's the only answer coming up on duckduckgo for this question, this can be useful. Under Ubuntu 15 and up:
sudo systemctl enable mongod.service
Here is my solution
make a bash script with these lines
/usr/bin/mongod -f /etc/mongo_shard001.conf
/usr/bin/mongod -f /etc/mongoarb.conf
/usr/bin/mongos -f /etc/mongos.conf
and then add this line to your crontab
#reboot root cd /foldername && ./scriptname.sh
systemd would be a better solution, if anyone knows how to set it up.
the mongo documentation is no help
I just installed mongodb by following the instructions at here.
When I try to start mongodb using command
sudo systemctl status mongodb
it goes to next command line and after that i run the command
sudo systemctl status mongodb
I got the following message
mongodb.service - High-performance, schema-free document-oriented database
Loaded: loaded (/etc/systemd/system/mongodb.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2016-08-13 16:37:29 IST; 2min 50s ago
Process: 10572 ExecStart=/usr/bin/mongod --quiet --config /etc/mongod.conf (code=exited, status=14)
Main PID: 10572 (code=exited, status=14)
Aug 13 16:37:28 nagainfo-Lenovo-G50-70 systemd[1]: Started High-performance, schema-free document-oriented database.
Aug 13 16:37:29 nagainfo-Lenovo-G50-70 systemd[1]: mongodb.service: Main process exited, code=exited, status=14/n/a
Aug 13 16:37:29 nagainfo-Lenovo-G50-70 systemd[1]: mongodb.service: Unit entered failed state.
Aug 13 16:37:29 nagainfo-Lenovo-G50-70 systemd[1]: mongodb.service: Failed with result 'exit-code'.
Please help me to resolve this. I have tried many things like giving permission to log and lib fies. But nothing work for me.
Thanks in advance :)