Im trying to get Openssl & Net:SSLeay to work on my Raspberry PI. I was following this documentary to install the stuff, but i ran into some error.
When im Running
perl Meakefile.PL
it returns this
Checking for OpenSSL-0.9.6j or 0.9.7b or newer...
You have OpenSSL-1.1.1d installed in /usr
That's is newer than what this module was tested with (0.9.6j
or 0.9.7b). You should
consider checking if there is a newer release of this module
available. Everything will probably work OK, though.
*** Could not figure out which C compiler was used to compile /usr/bin/openssl. It is essentiall that OpenSSL, perl, and Net::SSLeay are compiled with the same compiler and flags. Mixing and matching compilers is not supported. at Makefile.PL line 140.
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for Net::SSLeay
Writing MYMETA.yml and MYMETA.json
After the command im supposed to
make install
but this just outputs this:
uploaded it to Github Gist, since I couldn't paste it all here.
and yes, before you ask, i already installed libssl-dev.
I've tried installing & fixing this for several hours now, i hope you can help me
OP did not provide information about working environment. What Linux distribution is installed in Raspberry? What version of perl is installed into the environment?
As the question mentioned Raspbian I assume that some form of Debian Linux distribution is pre-installed into Raspberry board
If Raspberry pre-installed with some Debian distribution then see if Net::SSLEay available as package
apt-cache search -n ssleay
if the package is available then install it with following command
apt-get install [package_name]
If Raspberry pre-installed with something else then try following
cpan install Net::SSLeay
or
cpanm install Net::SSLeay
If the above does not work then try to use
perl -MCPAN -e shell
install Net::SSLeay
Note: the installation of some perl modules require C compiler be available to compile binaries
Please see following webpage for possible answer to your question.
Related
I'm having a tough job trying to get GD installed. I'm running a Mas OSX 10.9.2 darwin 13.0.1
When I run this:
cpan[1]> install GD
perl -MCPAN -e shell
I get the follwing error:
cpan[1]> install GD
Reading '/Users/me/.cpan/Metadata'
Database was generated on Sun, 21 Dec 2014 18:53:17 GMT
Running install for module 'GD'
Running make for L/LD/LDS/GD-2.56.tar.gz
Checksum for /Users/me/.cpan/sources/authors/id/L/LD/LDS/GD-2.56.tar.gz ok
Scanning cache /Users/me/.cpan/build for sizes
............................................................................DONE
CPAN.pm: Building L/LD/LDS/GD-2.56.tar.gz
Configuring for libgd version 2.0.11.
Checking for stray libgd header files...none found.
GD library used from: /usr/local
Please choose the features that match how libgd was built:
Undefined subroutine &main::prompt called at Build.PL line 169.
Warning: No success on command[/usr/bin/perl Build.PL ]
'YAML' not installed, will not store persistent state
LDS/GD-2.56.tar.gz
/usr/bin/perl Build.PL -- NOT OK
Running Build test
Make had some problems, won't test
Running Build install
Make had some problems, won't install
Could not read metadata file. Falling back to other methods to determine prerequisites
Failed during this command:
LDS/GD-2.56.tar.gz : writemakefile NO '/usr/bin/perl Build.PL ' returned status 512
Build.PL is trying to call a function called prompt but it doesn't exist. This is because they recently switched build systems from ExtUtils::MakeMaker (Makefile.PL) to Module::Build (Build.PL) but didn't fully convert the program. I've reported the bug.
Most people don't notice this because the prompting is only necessary if GD can't configure itself. It does this by looking for the gdlib-config program. If that can't be found, or it doesn't work, it will ask you for your gdlib configuration. It's best to let gdlib-config take care of that. Best way to solve this problem is to make sure gdlib-config is somewhere in your PATH and that gdlib-config --all works.
Otherwise replace all the instances of prompt in Build.PL with Module::Build->prompt and it should work.
I'm not sure about doing this on OSX, but I recently had similar problems with installing CPAN modules on CentOS.
Some prerequisite modules simply wouldn't install properly from CPAN. These modules had RPMs available. After installing some of the prerequisites via yum, I was able to get CPAN to install the modules I needed.
In particular, I had to install Module-Build and Archive-Tar (which brought in a number of other dependency rpm's) using yum.
Hope this helps.
I am following the below procedure for installing LDAP in unix
1.tar -xzf perl-ldap-0.43.tar.gz
2.cd perl-ldap-0.43
3.perl MakeFile.PL
I am getting below message
* Checking for Perl dependencies...
We have to reconfigure CPAN.pm due to following uninitialized parameters:
cpan_home, keep_source_where, build_dir, build_cache, scan_cache, index_expire, gzip, tar, unzip, make, pager, makepl_arg, make_arg, make_install_arg, urllist, inhibit_startup_message, ftp_proxy, http_proxy, no_proxy, prerequisites_policy, cache_metadata
CPAN is the world-wide archive of perl resources. It consists of about
100 sites that all replicate the same contents all around the globe.
Many countries have at least one CPAN site already. The resources
found on CPAN are easily accessible with the CPAN.pm module. If you
want to use CPAN.pm, you have to configure it properly.
If you do not want to enter a dialog now, you can answer 'no' to this
question and I'll try to autoconfigure. (Note: you can revisit this
dialog anytime later by typing 'o conf init' at the cpan prompt.)
Are you ready for manual configuration? [yes]
How to install without CPAN and what are the dependent modules required to install Ldap?
Can anyone suggest me the standard process of installation.
Thanks In Advance
I assume that by perl-ldap-0.43.tar.gz you are trying to install Net::LDAP
How to install without CPAN?
CPAN is the recommended way of installing Perl modules. You have to configure it just once, after that if you need to install any Perl module you can just type the below.
$ cpan ModuleName like in your case instead of downloading, untaring and running makefile you can just do:
$ cpan Net::LDAP
What are the dependent modules required to install Ldap?
One more advantage of using CPAN is you don't have to care about dependencies. CPAN will install dependencies automatically if you ask it to do so. Do it by
$ perl -MCPAN -e shell
cpan[1]> o conf prerequisites_policy follow
cpan[2]> o conf commit
exit
Or just use App::cpanminus and run
$ cpanm Net::LDAP it will install the module with all its dependencies.
Also check out Perl LDAP page.
Edit: Based on your answer
You will get some errors like above, you will have to see the error log, check the Module which is missing, then go to CPAN and download that module's tar.gz and then do the same steps as you were doing, like untaring, and running Makefile. You will have to do this unless all of your dependencies are installed.
Can we ignore warnings while installing perl modules?
I have installed ExtUtils-MakeMaker-6.98.tar.gz by ignoring below warnings
Using included version of ExtUtils::Install (1.54) as it is newer than the installed version (1.33).
Using included version of CPAN::Meta::YAML (0.008) because it is not already installed.
Using included version of JSON::PP::Compat5006 (1.09) because it is not already installed.
Using included version of ExtUtils::Manifest (1.60) as it is newer than the installed version (1.46).
Using included version of version (0.88) because it is not already installed.
Using included version of ExtUtils::Command (1.16) as it is newer than the installed version (1.09).
Using included version of CPAN::Meta (2.120351) because it is not already installed.
Using included version of JSON::PP (2.27203) because it is not already installed.
Using included version of File::Temp (0.22) as it is newer than the installed version (0.16).
Using included version of Parse::CPAN::Meta (1.4405) because it is not already installed.
Using included version of File::Copy::Recursive (0.38) because it is not already installed.
Checking if your kit is complete...
Warning: the following files are missing in your kit:
't/liblist/win32/di
't/liblist/win32/space
Please inform the author.
Generating a Unix-style Makefile
Writing Makefile for ExtUtils::MakeMaker
Writing MYMETA.yml and MYMETA.json**
But I'm able to install successfully. Will it create any problems in future?
when i try to install "GD" (perl -e shell -MCPAN ->(next step) cpan[1]> install GD) on Redhat 6.5 i got the error:
->
CPAN.pm: Building L/LD/LDS/GD-2.53.tar.gz
UNRECOVERABLE ERROR
Could not find gdlib-config in the search path. Please install libgd 2.0.28 or higher.
If you want to try to compile anyway, please rerun this script with the option --ignore_missing_gd.
Warning: No success on command[/usr/bin/perl Makefile.PL INSTALLDIRS=site]
CPAN: YAML loaded ok (v0.90)
LDS/GD-2.53.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- NOT OK
Running make test
Make had some problems, won't test
Running make install
Make had some problems, won't install
Could not read metadata file. Falling back to other methods to determine prerequisites
Failed during this command:
LDS/GD-2.53.tar.gz : writemakefile NO '/usr/bin/perl Makefile.PL INSTALLDIRS=site' returned status 512
<-
I tryed to install "libgd 2.0.28 or higher" but don't find this in "yum".
locate libgd (shows):
/usr/lib64/libgd.so.2
/usr/lib64/libgd.so.2.0.0
Does anyone know an advice?
Many perl modules are available already built and packaged for RHEL and derivatives such as CentOS. In the case of perl-GD, it seems it is available in the CentOS in the base repo even though it is not in the RHEL repo.
However you can still use the Centos repo by adding it to your yum configuration. Create a file /etc/yum.repos.d/cantos.repo containing:
[centos]
name=CentOS $releasever - $basearch
baseurl=http://mirror.centos.org/centos-6/6/os/$basearch/
enabled=0
gpgcheck=0
After which you should be able to install perl-GD
yum install --enablerepo centos perl-GD
It looks as though the current version of perl-GD for centos is 2.44.
If you do need a newer version that that, you will either need to find a 3rd party yum repo which has the later version of libgd available, or compile it from source. In a quick google I could not find the former, so I would recommend you download the latest source package and install that.
You need the package gd-devel then rebuild the GD module.
I am new to perl scripting.I am working on drag and drop file upload and using jquery file upload.I'll appreciate if you can help me in installing this perl module and how to use it.
I am trying to follow readme file but while doing "Perl Makefile.pl" some warnings are there
Warning: prerequisite Image::Magick 0 not found.
Warning: prerequisite JSON::XS 0 not found.
Warning: prerequisite Net::SSH2 0 not found.
Warning: prerequisite Net::SSH2::SFTP 0 not found.
WARNING: Setting ABSTRACT via file 'lib/jQuery/File/Upload.pm' failed
at /usr/lib/perl5/5.8.8/ExtUtils/MakeMaker.pm line 609
Writing Makefile for jQuery::File::Upload
Writing MYMETA.yml and MYMETA.json
i am not sure if it is installed or not.
Please help me for implementation.
Thanks,
Manish
It failed or you will likely gets problems anyway, and you will likely need to install the packages mentioned in the errors. You may also need to install some ssl dev lib bits. For example on mine (Linux Mint/Ubuntu), I needed to do the following...
#edit, looks like on yours you need to install Image::Magick as well
sudo cpan JSON::XS
sudo apt-get install libssh2-1-dev
sudo apt-get install libssl-dev
sudo cpan Net::SSH2
Note: the above packages you may want to see if you can find via your package manager rather than CPAN, however the above should steer you in the right direction of the things you probably need.
then back to the README
perl Makefile.PL
make
make test
make install
My perl version is 5.16.2 on my Windows 7 64bit, I failed to install PAR:Packer. I tried active perl and strawberry perl , both got the same error. Can you please give me some suggestion. Below is my experience:
I tried ppm install PAR:Packer, version 1.013, But when I use pp, I got the error:
Perl lib version (5.16.2) doesn't match executable version (v5.16.0).
I also tried cpan install PAR:Packer, version 1.014. But I got the error during installation. The pop up window says: par.exe has stopped working. Then command prompt got the error:
C:\Perl64\bin\perl.exe -Mblib run_with_inc.pl par.exe -q -B -Oparldyn.exe
system(par.exe -I C:\Users\PAR-Packer-1.014\blib\arch -I C:\Users\PAR-Packer-1.014\blib\lib - IC:/Perl64/site/lib -IC:/Perl64/lib -I. -q -B -Oparldyn.exe) failed:
dmake.exe: Error code 255, while making 'parldyn.exe'
dmake.exe: Error code 255, while making 'subdirs'
I have googled extensively, but as of yet haven't been able to find a solution, any help is greatly appreciated, thanks a lot!
I simply changed the line 60 in .../perl64/Config.pm from
`$^V eq 5.16.3`
to
`$^V eq 5.16.3 or $^V eq 5.16.0`
and voila! My par-packer module 1.013 installed through ppm (ActiveState Perl 5.16.3) works ...
I'll start off with my own environment:
Windows 7 x64 en_US
Strawberry Perl v5.16.2 32bit
I just confirmed that I do have PAR::Packer working on my environment. I'm running PAR::Packer version 1.014.
There is a bug logged about PAR::Packer 1.013 failing to build on certain environments. The bug is logged on CPAN here: https://rt.cpan.org/Public/Bug/Display.html?id=77408
I recommend trying one of the following paths forward (based on your build version requirements):
Install PAR::Packer 1.0.14.
Install the patched version of PAR::Packer 1.013 that is available at http://strawberryperl.com/package/kmx/perl-modules-patched/PAR-Packer-1.013_patched.tar.gz
To build you will need any dependencies as well. Hopefully those work just fine through CPAN.
Download either the patched version listed above or the latest version from the CPAN site, then execute:
perl Makefile.pl
dmake
dmake test
dmake install
Keep in mind PAR::Packer requires a C/C++ compiler to build.
I ran into this exact same error scenario with Perl 5.16.3 on my Windows 7 64 bit machine. I started my Perl tinkering with ActiveState and later installed other related programs like Komodo Edit and finally installed StrawberryPerl. After reading quite a few of these online posts I tried the manual dmake methods and whatever other suggestions I could find. I then tried uninstalling ActiveState. That didn't help either. Finally, I went on an uninstall binge and found that after uninstalling all of the ActiveState and Komodo applications (along with a bunch of other stuff I wasn't using anymore) I was able to successfully install and use pp in two simple steps from the cpan prompt:
install CPAN
install pp
I was going to uninstall and re-install StrawberryPerl next but didn't have to. The install CPAN may not be necessary but it was suggested in the log output in one of my previously failed attempts so I figured I'd try that first. Hope this saves someone all the hassle I went to as a begginer.