I am trying to create a web2py progressive app but so far in all I have done Chrome Developer Tools keeps showing a warning message that says :
"No matching service worker detected. You may need to reload page or check that the scope of the service worker for the current page encloses the scope of the start URL from the manifest."
I have placed the service worker and the main.js file in {{=URL('static','js/')}} directory.
In my research I came across some information saying that I have to place the service worker in a root directory but I dont know where to locate the root directory in this framework!
Please assist me in figuring this out.
Make sure you have registered your service worker correctly and your main.js include in index.html
For better answer post service worker register code and index.html so it will be better to understand.
Thanks
Related
I have a website running where I use Nginx Proxy Manager to redirect to this website. However, as soon as I hit my website I get the following message:
Does anyone have a clue what is happening here?
Finally, I came to the following conclusion. I think from my experience it can mean two things:
Either your website/docker container is not running
Or Nginx cannot find an index.html file on the main root of web address 'example.com'.
However, hostinger.com points out the following:
Unresolved domain name
Server overload
Browser issues
Home-network equipment error
Firewall blocks
So make sure that index.html is present for your website and you have trouble shooted your container where you are 100% sure that docker container has no exceptions, errors and runs perfectly fine. Try use something like 'docker-compose logs' where the docker-compose.yml is located (this only works for a running docker container)
I'm pretty beginner with the whole RTC concept, so I have started a server:
Server clm is started.
The clm server was started.
I am trying to login to jazz admin page to configure the setup, the url I'm using is:
http://[fully qualified hostname]:9080/jts/setup
http://[fully qualified hostname]:9080/jts/admin
I get the "Context root not found" page, not sure where am I going wrong. Then again I found a URL for Liberty admin center page ( not sure why is it used). But I gave it a try
http://[fully qualified hostname]:9080/adminCenter
I can open the page, but i do not have the login credentials. It is pretty confusing, if anyone can guide me through it'd be helpful.
From this thread:
The context root being accessed is /jts... and jts is a default context root for JTS (refer to Installing the Rational solution for Collaborative Lifecycle Management by using IBM Installation Manager).
Unless a different context root was entered during the installation, I would expect /jts to be the context root for JTS application.
%CLM601_DIR%\server\liberty\servers\clm\conf\application.xml has information about the application being deployed.
It should also show application context roots as well.
Can you access /jts/scr or any other applications such as /ccm/scr, /qm/scr, etc?
If not, that could be that the applications are not deployed OR they did not start up successfully.
You can check logs such as console.log, jts.log, etc in %CLM601_DIR%\server\liberty\servers\clm\logs and see if any errors are there.
This is a different scenario from other question on this topic. My deployment almost succeeded and I can see the following lines at the end of my log
[datalab].../#015Updating module [datalab]...done.
Jul 25 16:22:36 datalab-deploy-main-20160725-16-19-55 startupscript: Deployed module [datalab] to [https://main-dot-datalab-dot-.appspot.com]
Jul 25 16:22:36 datalab-deploy-main-20160725-16-19-55 startupscript: Step deploy datalab module succeeded.
Jul 25 16:22:36 datalab-deploy-main-20160725-16-19-55 startupscript: Deleting VM instance...
The landing page keeps showing a wait bar indicating the deployment is still in progress. I have tried deploying several times in last couple of days.
About additions described on the landing page -
An App Engine "datalab" module is added. - when I click on the pop-out url "https://datalab-dot-.appspot.com/" it throws an error page with "404 page not found"
A "datalab" Compute Engine network is added. - Under "Compute Engine > Operations" I can see a create instance for datalab deployment with my id and a delete instance operation with *******-ompute#developer.gserviceaccount.com id. not sure what it means.
Datalab branch is added to the git repo- Yes and with all the components.
I think the deployment is partially successful. When I visit the landing page again, the only option I see is to deploy the datalab again and not to start it. Can someone spot the problem ? Appreciate the help.
I read the other posts on this topic and tried to verify my deployment using - "https://console.developers.google.com/apis/api/source/overview?project=" I get the following message-
The API doesn't exist or you don't have permission to access it
You can try looking at the App Engine dashboard here, to verify that there is a "datalab" service deployed.
If that is missing, then you need to redeploy again (or switch to the new locally-run version).
If that is present, then you should also be able to see a "datalab" network here, and a VM instance named something like "gae-datalab-main-..." here. If either of those are missing, then try going back to the App Engine console, deleting the "datalab" service, and redeploying.
I have successfully setup ndbcluster version 7.1.26.
This contains 2 data nodes[NDBD], 2 mysql [MYSQLD] nodes and one management [MGMD] node.
Replication works successfully.
My Web application is deployed in JBoss-5.0.1 and using JNDI for connection resources which are specified in application specific ds.xml file in load balanced url forms e.g. jbdc:mysql:loadbalance:host1:port1,host2:port2/databaseName.
host1 : refers to first mysqld node and port1 refers the port it is running on.
host2 : refers to second mysqld node and port2 refers the port it is running on.
When both of the [MySQLD] nodes are up and running everything works fine and cluster responds well, replicates data, and data retrieval operations also work properly.
But issues are raised when any of the [MySQLD] nodes goes down. Data gets inserted/updated/replicated but the application is unable to retrieve data from cluster and web page remains busy working which means busy retrieving data. As soon as the node which was down goes up it responds properly and application goes forward and shows up data retrieved from cluster.
At JBoss 5.0.1 startup it showed up a NullPointerException in class LoadBalancingConnectionProxy.invoke(LoadBalancingConnectionProxy.java:439). Tell me if the above Exception plays any role in the above explained issues.
If anyone had faced issues like above and if has any solution regarding the issues please let me know.
Thanks and regards.
I have resolved the issue as it was a bug in the connectorJ's version.
As The project I am working on was already using both the buggy jar mysql-connector-java-5.0.8.jar and the jar version in which the issue is already resolved i.e. mysql-connector-java-5.1.13-bin.jar.
After all the search when I removed the jar mysql-connector-java-5.0.8.jar my issues got resolved.
All that was problematic was that the ConnectorJ/Driver was getting referred from the buggy jar.
The bug id and url which refers to this issue is:
http://bugs.mysql.com/bug.php?id=31053
.
Thanks for considerations.
Are you using different userids and passwords for each of the hosts(host1, host2) specified in the tag ? (Either directly or using tag) ?
I have followed the instructions at https://github.com/cloudfoundry/oss-docs/tree/master/vcap/adding_a_system_service and copied the echo service and created my new service. (That document is somewhat out-of-date in that "excluded components" no longer exists.
In any case, my service shows up as running with a gateway and a node when I look at 'vcap status' on the server. However, when I look at 'vmc services' from the client my service is not in the list. Where is this list maintained and why is my service not on the list?
Various services, including blob, filesystem, mongodb, etc, are shown on the 'vcm services' list even though they have never been included in my config. Where is this maintained and why are other services on this list?
The cloud_controller.log file shows a "Create service request:" for echo every minute. This service is not in my config file (it was once but it was removed and I repeated the deployment). What is prompting this request for a service that was not defined in the config?
The _gateway.log for my service shows the following:
INFO -- Sending info to cloud controller: ...api.vcap.me/services/v1/offerings
INFO -- Fetching handles from cloud controller .../offerings/.../handles
ERROR -- Failed registering with cloud controller, status=400
DEBUG -- [GaaS-Provisioner] Connected to node mbus..
ERROR -- Failed fetching handles, status=404
Why does my gateway fail to register with the cloud controller? I have found some reports that suggest that the problem is with domain name mapping. I have verified that the server can find itself:
$curl api.vcap.me
Welcome to VMware's Cloud Application Platform
What can I do to register my service?
You can also try asking your question on the vcap_dev google group.
https://groups.google.com/a/cloudfoundry.org/forum/?fromgroups#!forum/vcap-dev
They are focused in answering and discussing OSS subjects for Cloud Foundry!
If you follow the document correctly things should work just fine. I understand that the mechanism for maintaining the excluded list of components has changed and can be a point of confusion when following the steps mentioned in the article (just ignore that step totally).
ERROR -- Failed registering with cloud controller, status=400
Well this is a point of worry. I recently followed the article step by step and was able to add a new service.
Is the echo service showing up in vmc services?
Have you copied the the yml files for node and gateway at ./cloudfoundry/.deployments/devbox/config?
Are the tokens for your gateway unique? and matching in the two files? ./cloudfoundry/.deployments/devbox/config/cloud_controller.yml and ./cloudfoundry/.deployments/devbox/config/**_gateway.yml**
I would recommend that you first concentrate on getting the echo service to be listed in the vmc services output. Once done with this you should replicate the steps (with absolute care to modify things like the token) to get your custom service working.
Cheers,
Ankit
You should follow this guide
It work to me.
regards.