env:
macos
zookeeper3.6.1
problem:
I can run stand alone mode but when I start the cluster(include 3 nodes) It throws the error:
org.apache.zookeeper.server.quorum.QuorumPeerConfig$ConfigException: Error processing /Volumes/苹果存储盘/zookeeper/zookeeper2181/bin/../conf/zoo.cfg
at org.apache.zookeeper.server.quorum.QuorumPeerConfig.parse(QuorumPeerConfig.java:197)
at org.apache.zookeeper.server.quorum.QuorumPeerMain.initializeAndRun(QuorumPeerMain.java:124)
at org.apache.zookeeper.server.quorum.QuorumPeerMain.main(QuorumPeerMain.java:90)
Caused by: java.lang.IllegalArgumentException: myid file is missing
at org.apache.zookeeper.server.quorum.QuorumPeerConfig.checkValidity(QuorumPeerConfig.java:810)
at org.apache.zookeeper.server.quorum.QuorumPeerConfig.setupQuorumPeerConfig(QuorumPeerConfig.java:681)
at org.apache.zookeeper.server.quorum.QuorumPeerConfig.parseProperties(QuorumPeerConfig.java:506)
at org.apache.zookeeper.server.quorum.QuorumPeerConfig.parse(QuorumPeerConfig.java:193)
... 2 more
The point is, I've created myid file in the data directory, and I've written the correct value in myid.
eg:
cd/Volumes/苹果存储盘/zookeeper/zookeeper2181/data
echo "1" > myid
But it still throws this error. I can make sure the position of myid file is correct
simply create a file with name myid in Zookeeper Data Dir (you can check it's location in zookeeper config file) and place the id of this server into it.
for example, for server with id 1 we can do this by :
echo "1" > /var/zookeeper/myid
Related
Good day,
I am using tFileInputDelimited in Talend Data Studio to read a txt file and get some value inside.
The input file name is something like follow, it contain day in the file name:
checksum_150123.txt
This file will create in last few steps before the job end and the file not found.
Thus, every day the job first run, there is no file exist, and then tFileInputDelimited will throw error on file not found.
C:\LandingZone\jx\checksum_180123.txt (The system cannot find the file specified)
[ERROR] 14:13:35 my_track.my_precheck_registration_0_1.DL_PRECHECK_REGISTRATION- CollectCheckSum_1_tFileInputDelimited_1 - C:\LandingZone\jx\checksum_180123.txt (The system cannot find the file specified)
I have a requirement to not showing this, may I know how can I configure this?
for that I recommend you to use the tFileExist component and then use the tFileExist variable Exist (((Boolean)globalMap.get("tFileExist_1_EXISTS")) for example) in a run if trigger
Hope this answers your question
When I start confluent platform I get an error [ERROR] unable to load config: unable to parse config file: /home/user/.confluent/config.json: unexpected end of JSON input. There is no file in the path shown in the error.
Unexpected EOF would suggest the file is present. .confluent directory is hidden, so it's not clear how you've checked if the file exists.
Try ls -laR~/.confluentorfind $HOME -name config.json`...
In any case, kafka-server-start should work fine, and I suggest using it
I am trying to install kafka in my system; but I am getting the below exception.
Exception : "The filename, directory name or volume level syntax is incorrect ".
I am doing the following steps:
1. Downloaded kafka_2.11-0.9.0.0 and extracted in a folder.
2. I have modified the server.properties for log.dirs
log.dirs= D:\Kafka\kafka_2.11-0.9.0.0\kafka-logs
3. then from CMD i am triggering the below.
.\bin\windows\kafka-server-start.bat .\config\server.properties.
Any help would be appreciated.
In isql-vt (the Ubuntu name for Virtuoso's isql), I am trying to import a test .ttl file, but get the error "Can't stat file":
SQL> DB.DBA.TTLP(file_to_string_output('./scratch/ttl/granule.ttl'),'','http://origin.mytest.org/');
*** Error 42000: [Virtuoso Driver][Virtuoso Server]FA112: Can't stat file './scratch/ttl/granule.ttl', error (2) : No such file or directory
However, the file is definitely there; I can even cat it:
SQL> !cat ./scratch/ttl/granule.ttl;
#prefix datacite: <http://purl.org/spar/datacite/> .
#prefix prov: <http://www.w3.org/ns/prov#> .
<http://0.0.0.0:3000/granule/MOD09.A2016278.0110.006.2016279074214.hdf>
datacite:identifier "MOD09.A2016278.0110.006.2016279074214.hdf";
prov:wasGeneratedBy <http://0.0.0.0:3000/run/MODAPS_456056327>;
a prov:entity .
SQL>
Why is the DB.DBA.TTLP command saying it can't stat it?
Trying to use the full path gave a much better error message:
SQL> DB.DBA.TTLP(file_to_string_output('/home/ubuntu/Origin/scratch/ttl/granule.ttl'),'','http://origin.nasa.gov/');
*** Error 42000: [Virtuoso Driver][Virtuoso Server]FA003: Access to
'/home/ubuntu/Origin/scratch/ttl/granule.ttl' is denied due to access control in ini file
So, the solution was to add the path in /etc/virtuoso-opensource-6.1/virtuoso.ini, eg:
...
DirsAllowed = ., /usr/share/virtuoso-opensource-6.1/vad, /home/ubuntu/Origin
...
and restart virtuoso for the change to take effect.
I just can't figure out what's going on with my RSync. I'm running RSync on RHEL5, ip = xx.xx.xx.97. It's getting files from RHEL5, ip = xx.xx.xx.96.
Here's what the log (which I specified on the RSync command line) shows on xx.97 (the one requesting the files):
(local time)
2015/08/30 13:40:01 [17353] #ERROR: auth failed on module tomcat_backup
2015/08/30 13:40:01 [17353] rsync error: error starting client-server protocol (code 5) at main.c(1530) [receiver=3.0.6]
Here's what the log(which is specified in the rsyncd.conf file) shows on xx.96 (the one supplying the files):
(UTC time)
2015/08/30 07:40:01 [8836] name lookup failed for xx.xx.xx.97: Name or service not known
2015/08/30 07:40:01 [8836] connect from UNKNOWN (xx.xx.xx.97)
2015/08/30 07:40:01 [8836] auth failed on module tomcat_backup from unknown (xx.xx.xx.97): password mismatch
Here's the actual rsync.sh command called from xx.xx.xx.97 (the requester):
export RSYNC_PASSWORD=rsyncclient
rsync -havz --log-file=/usr/local/bin/RSync/test.log rsync://rsyncclient#xx.xx.xx.96/tomcat_backup/ProcessSniffer/ /usr/local/bin/ProcessSniffer
Here's the rsyncd.conf on xx.xx.xx.97:
lock file = /var/run/rsync.lock
log file = /var/log/rsyncd.log
pid file = /var/run/rsyncd.pid
[files]
name = tomcat_backup
path = /usr/local/bin/
comment = The copy/backup of tomcat from .96
uid = tomcat
gid = tomcat
read only = no
list = yes
auth users = rsyncclient
secrets file = /etc/rsyncd.secrets
hosts allow = xx.xx.xx.96/255.255.255.0
Here's the rsyncd.secrets on xx.xx.xx.97:
files:files
Here's the rsyncd.conf on xx.xx.xx.96 (the supplier of files):
Note: there is a 'cwrsync' (Windows version of rsync) successfully calling for files also (xx.xx.xx.100)
Note: yes, there is the possibility of xx.96 requesting files from xx.97. However, this is NOT actually happening.
It's commented out of the init.d mechanism.
lock file = /var/run/rsync.lock
log file = /var/log/rsync.log
pid file = /var/run/rsync.pid
strict modes = false
[files]
name = tomcat_backup
path = /usr/local/bin
comment = The copy/backup of tomcat from xx.97
uid = tomcat
gid = tomcat
read only = no
list = yes
auth users = rsyncclient
secrets file = /etc/rsyncd.secrets
hosts allow = xx.xx.xx.97/255.255.255.0, xx.xx.xx.100/255.255.255.0
Here's the rsyncd.secrets on xx.xx.xx.97:
files:files
It was something else. I had a script calling the rsync command, and that was causing the problem. The actual rsync command line was ok.
Apologies.
This is what I have been through when I got this error. My first thinking was to check rsync server log. and it is not in the place configured in rsync.conf. Then I checked the log printed in systemctl status rsyncd
rsyncd[23391]: auth failed on module signaling from unknown (172.28.15.10): missing secret for user "rsync_backup"
rsyncd[23394]: Badly formed boolean in configuration file: "no # rsync daemon before transmission, change to the root directory and limited within.".
rsyncd[23394]: params.c:Parameter() - Ignoring badly formed line in configuration file: ignore errors # ignore some io error informations.
rsyncd[23394]: Badly formed boolean in configuration file: "false # if true, cannot upload file to this server.".
rsyncd[23394]: Badly formed boolean in configuration file: "false # if true, cannot download file from this server.".
rsyncd[23394]: Badly formed boolean in configuration file: "false # if true, can only list files here.".
Combining the fact that log configuration does not come into play. It seems that the comment after each line of configuration in rsync.conf makes configurations invalid. So I deleted those # ... and restart rsyncd.