Related
I have installed Postgres 12 on Ubuntu by building it from source and I am facing two issues:
Although I followed the installation manual from Postgrez, every time I restart my computer, my Postgres server stopz and is no longer seen as a running process.
To start it the first time after install, I do this from the terminal:
/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
/usr/local/pgsql/bin/pg_ctl -D /usr/local/pgsql/data -l logfile start
After a restart, to start DB again when I run: /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data, it throws this error:
initdb: error: directory "/usr/local/pgsql/data" exists but is not empty
If you want to create a new database system, either remove or empty
the directory "/usr/local/pgsql/data" or run initdb
with an argument other than "/usr/local/pgsql/data".
Does that mean that every time I start Postgres after a restart, I have to create a new /data directory?
Upon installing Postgres sing pip or pip3, one can just switch user to postgres and run psql to enter postgres, however now I have to run "/usr/local/bin/psql". Please note I have exported all the paths per https://www.postgresql.org/docs/12/installation.html. How can I fix this? Can an alias be set for this?
After a restart, to start DB again when I run:
/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data, it throws this
error:
Does that mean that every
time I start Postgres after a restart, I have to create a new /data
directory?
No, quite the opposite. You don't need to initdb after the first time, you just need to start. It is your attempt to initdb when you don't need to which is causing the error message. Note that attempting to initdb isn't doing any harm, because it refused to run. It just generates log/console noise.
Upon installing Postgres sing pip or pip3, one can just switch user to
postgres and run psql to enter postgres, however now I have to run
"/usr/local/bin/psql". Please note I have exported all the paths per
https://www.postgresql.org/docs/12/installation.html. How can I fix
this?
I don't know what your first sentence means, as you don't use pip or pip3 to install PostgreSQL (or at least, the docs don't describe doing so) although you might use them to install psycopg2 to enable python to talk to PostgreSQL.
You could use an alias, but it would probably make more sense to edit ~/.bash_profile to set the PATH, as described from the page you linked to under Environment Variables.
You have to register postgreSQL as a service.
run this:
pg_ctl register [-N servicename] [-U username] [-P password] [-D datadir] [-S a[uto] | d[emand] ] [-w] [-t seconds] [-s] [-o options]
Example:
pg_ctl register -N postgresql -U OS_username -P OS_password -D '/etc/postgresql/12/data' -w
More info in the manual: pg_ctl
Notes:
Username and Password is related to the OS, not postgresql
If you have doubts read the manual.
/usr/local/pgsql/bin/pg_ctl start -D '/usr/local/pgsql/data'
Export following in postgres user account's ~/.bashrc:
LD_LIBRARY_PATH=/usr/local/pgsql/lib
export LD_LIBRARY_PATH
PATH=/usr/local/pgsql/bin:$PATH
export PATH
I am quite new in Arch and a total beginner in PostgreSQL, so this may be a very basic question.
I installed postgresql 11.5-4 from extra and pgadmin 4 from AUR, both seem to be running well.
I created a test DB with the following command:
initdb -D /home/lg/test-db
I got the answer:
You can start the db-server using:
pg_ctl -D /home/lg/test-db -l logdatei start
I tried that and got:
pg_ctl -D /home/lg/test-db -l logdatei start
waiting for serer to start.... stopped
pg_ctl: could not start the server
check the log.
The log only says that the lockfile »/run/postgresql/.s.PGSQL.5432.lock« could not be created, because the folder could not be found. Under /run is no folder called "postgresql". I suppose postgresql can not create this folder, because it does not have the permission. Several posts online posts suggest to change the user/owner of the db to sudo, however. Postgresql prevents this, however. When I try any command as sudo, postgresql tells me that this command can't be run as root. There must be some very basic error in my thinking here, but I have not worked it out for 3 hours.
You'll have to remove /run/postgresql from unix_socket_directories in postgresql.conf before starting the server.
Probably You have /var/run symlinked to /run and run is on tmpfs. You should add something like d /run/postgresql 0755 postgres postgres - into /usr/lib/tmpfiles.d/postgresql.conf
I'm trying to run psql on my Vagrant machine, but I get this error:
psql: could not connect to server: No such file or directory
Is the server running locally and accepting connections on
Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"?
Note: Vagrant 1.9.2
Box: ubuntu/trusty64, https://atlas.hashicorp.com/ubuntu/boxes/trusty64
EDIT
Commands I've used in order to install and run postgres:
sudo apt-get update
sudo apt-get install postgresql
sudo su postgres
psql -d postgres -U postgres
I've had this same issue, related to the configuration of my pg_hba.conf file (located in /etc/postgresql/9.6/main). Please note that 9.6 is the postgresql version I am using.
The error itself is related to a misconfiguration of postgresql, which causes the server to crash before it starts.
I would suggest following these instructions:
Certify that postgresql service is running, using sudo service postgresql start
Run pg_lsclusters from your terminal
Check what is the cluster you are running, the output should be something like:
Version - Cluster Port Status Owner Data directory
9.6 ------- main -- 5432 online postgres /var/lib/postgresql/9.6/main
Disregard the '---' signs, as they are being used there only for alignment.
The important information are the version and the cluster. You can also check whether the server is running or not in the status column.
Copy the info from the version and the cluster, and use like so:
pg_ctlcluster <version> <cluster> start, so in my case, using version 9.6 and cluster 'main', it would be pg_ctlcluster 9.6 main start
If something is wrong, then postgresql will generate a log, that can be accessed on /var/log/postgresql/postgresql-<version>-main.log, so in my case, the full command would be sudo nano /var/log/postgresql/postgresql-9.6-main.log.
The output should show what is the error.
2017-07-13 16:53:04 BRT [32176-1] LOG: invalid authentication method "all"
2017-07-13 16:53:04 BRT [32176-2] CONTEXT: line 90 of configuration file "/etc/postgresql/9.5/main/pg_hba.conf"
2017-07-13 16:53:04 BRT [32176-3] FATAL: could not load pg_hba.conf
Fix the errors and restart postgresql service through sudo service postgresql restart and it should be fine.
I have searched a lot to find this, credit goes to this post.
Best of luck!
I had the same issue but non of the answers here helped.
How I fixed it (mac)
Try to start postgresql with pg_ctl -D /usr/local/var/postgres start
Look for the Error Message that says something like FATAL: could not open directory "pg_tblspc": No such file or directory.
Create that missing directory mkdir /usr/local/var/postgres/pg_tblspc
Repeat from step one until you created all missing directories
When done and then trying to start postgresql again it might say FATAL: lock file "postmaster.pid" already exists
Delete postmaster.pid: rm /usr/local/var/postgres/postmaster.pid
Start postgres with: pg_ctl -D /usr/local/var/postgres start
Done ✨
These two steps solved it for me on Mac:
rm /usr/local/var/postgres/postmaster.pid
brew services restart postgresql
For M1 Macs:
rm /opt/homebrew/var/postgres/postmaster.pid
brew services restart postgresql
In case you face this issue (reported by #luckyguy73): psql: FATAL: database "postgresql" does not exist
You can run
brew postgresql-upgrade-database
to fix it.
I am just posting this for anyone who is feeling lost and hopeless as I did when I found this question. It seems that sometimes by editing some psotgresql-related config files, one can accidentally change the permissions of the file:
Note how pg_hba.conf belongs to root, and users cannot even read it. This causes postgres to not be able to open this file and therefore not be able to start the server, throwing the error seen in the original question.
By running
sudo chmod +r pg_hba.conf
I was able to make this file once again accessible to the postgres user and then after running
sudo service postgresql start
Was able to get the server running again.
WARNING: This will remove the database
Use command:
rm -rf /usr/local/var/postgres && initdb /usr/local/var/postgres -E utf8
WARNING: This will remove the database
Within zsh:
rm -rf /usr/local/var/postgres && initdb /usr/local/var/postgres -E utf8
This is the only thing that worked for me after countless hours trouble shooting.
Does the /etc/postgresql/9.6/main/postgresql.conf show that port being assigned? On my default Xubuntu Linux install, mine showed port = 5433 for some reason as best as I can remember, but I did comment out the line in that same file that said listen_addresses = 'localhost' and uncommented the line listen_addresses = '*'. So maybe start and check there. Hope that helps.
This works for me:
pg_ctl -D /usr/local/var/postgresql#9.6 stop;
brew services stop postgresql#9.6;
brew services start postgresql#9.6;
I was able to solve the issue by running:
sudo systemctl start postgresql#9.5-main
In my case Postgres was managed through Homebrew Services (i.e. started via brew services start postgresql#10 Terminal command for the Postgres 10 that I use), and for that setup I had to discover a couple of essential steps to do before I could apply any advice in this thread. So I want to share just that piece as it may help someone who has the same setup.
NOTE: all the commands below are to be run in Terminal.
To give a quick background: After upgrading to macOS Big Sur I discovered that Postgres wasn't working and running psql results in the error mentioned in the original question above. I tried to start Postgres (via the brew services start postgresql#10 command), this resulted in a message Service postgresql#10 already started. If I tried to restart it (via the brew services restart postgresql#10) I got a message that it was stopped and then started successfully. But! This was a misleading message, and I spent quite some time searching for config issues etc. before discovering that the service was not started successfully in reality.
So, the way to investigate this is:
Make sure the service is started by running the brew services start postgresql#10 (the latter argument may be different depending on what your Homebrew package name is e.g. postgresql#12 or plain postgresql).
Run brew services list. This is the command that gives you the true state of the service. In my case it said that Postgres' status is error:
Name Status User Plist
postgresql#10 error Denis /Users/Denis/Library/LaunchAgents/homebrew.mxcl.postgresql#10.plist
redis started Denis /Users/Denis/Library/LaunchAgents/homebrew.mxcl.redis.plist
To investigate further open the config shown in the same command output in Plist column (I used nano /Users/Denis/Library/LaunchAgents/homebrew.mxcl.postgresql#10.plist to check it).
In the config look for the StandardErrorPath key, and open the file located in the value of that key, i.e. in the <string> tag following the key. In my case it was /usr/local/var/log/postgresql#10.log.
Open that log and check the latest error (I used nano /usr/local/var/log/postgresql#10.log and then Alt+/ to go to the end of the file).
Voila. That is the real error to investigate, which you can then look for in the previous answers or google for. I'm not covering the rest here, as the goal of this answer is to show how to find the real error if you use Homebrew Services to run Postgres. (In my case it was the lock file "postmaster.pid" already exists already covered in the previous answers, plus the path to check right in the error message, in my case /usr/local/var/postgresql#10).
In my case it was the lockfile postmaster.id that was not deleted properly during the last system crash that caused the issue. Deleting it with sudo rm /usr/local/var/postgres/postmaster.pid and restarting Postgres solved the problem.
I recommend you should clarify port that postgres.
In my case I didn't know which port postgres was running on.
lsof -i | grep 'post'
then you can know which port is listening.
psql -U postgres -p "port_in_use"
with port option, might be answer. you can use psql.
If non of the above answers are not working for you, then please try this one,
Many people have mentioned many solutions to this problem! But all of them forgot that, the same problem will arise when your disk don't have enough space or the space you are assigned for postgres is full
Check your system storage, if its full free up some space! then restart your postgres by sudo service postgresql restart or do a stop and start sudo service posgresql stop then sudo service postgresql start
This will solve the issue, it solved for me
I occasionally have the same issue but mostly after macOS upgrades. Shutting down and migrating to the new version usually fixes it for me(make changes according to your version). So first upgrade your postgresql
brew services stop postgresql#12
brew services start postgresql#12
brew postgresql-upgrade-database
This is mostly a temporary fix but since I couldn't find a better solution this works for me.
Update: If the issue says that another postmaster is running then try removing it from that location(your postmaster.pid location will be displayed to you)
rm /usr/local/var/postgres/postmaster.pid
Open your database manager and execute this script
update pg_database set datallowconn = 'true' where datname = 'your_database_name';
I had the same error when I create the SQL db in a VM. I had changed the default value of /etc/postgresql/9.3/main/postgresql.conf shared_buffers = 200MB to 75% of my total RAM. Well, I forgot to actually allocate that RAM in the VM. When I gave the command to make a new database, I received the same error.
Powered off, gave the baby its bottle (RAM) and presto, it worked.
The same thing happened to me as I had changed something in the /etc/hosts file. After changing it back to 127.0.0.1 localhost it worked for me.
just reinstall your pgsql with direct version sudo apt-get install postgresql-9.5 (u must remove the package before install new one)
I had similar problems just a while ago. After trying more than 5 suggestions I decided to go back to the basics and start from the beginning. Which meant removing my postgresql installation and following this guide upon re-installing postgresql. https://help.ubuntu.com/lts/serverguide/postgresql.html
Ubuntu 20
This Problem happened to me, as ubuntu pre-installed version of Postgresql-9.6 server was always down and after trying all the above answers it didn't start.
Solution:
I installed another version of Postgresql which is postgresql-13, using this command: sudo apt install postgresql it will install the latest version of postgresql.
I see if the server is online or down using this command: pg_lsclusters if the new version of postgresql is online, we will proceed to remove the old version of postgresql.
we will see all packages that are installed related to postgresql, using this command: dpkg -l | grep postgresql
Remove the old version, which is here postgresql-9.6. Using this command:
sudo apt-get --purge remove postgresql-9.6 postgresql-client-9.6 replace 9.6 with your old version number. Final remaining packages related to the latest Version 13:
Restart your postgresql latest version server, which is here postgresql-13. Using this command: sudo systemctl restart postgresql#13-main replace 13 in the command with your latest version number.
Now, if you try psql command you will get an error related to your user, as in the image:
To Remove the above error, The installation procedure created a user account called postgres that is associated with the default Postgres role, to switch over to the postgres account use this command: sudo -u postgres psql this command will log you into the interactive Postgres session. You can also set your password for this user using this command \password postgres.
Then change the Port to the deafult port of postgresql, which is 5432 as all application will try to connect to postgresql using this port by default, using this command: sudo nano /etc/postgresql/13/main/postgresql.conf, it will open postgresql configuration file, then search for port and change it to 5432. After that you need to restart the server using this command sudo systemctl restart postgresql#13-main. Note, Replace 13 in the command with your latest version.
If you want to create your own User/Role, use this command: sudo -u postgres createuser --interactive. The script will prompt you with some choices, as in the image and based on your responses, it will execute the correct Postgres commands to create a user to your specifications.
Tutorial: For more information on postgresql related commands
I couldn't connect using the psql command and kept getting the error Cannot connect to Server: No such file or directory.
Step 1: Check the status of the Postgres cluster
$ pg_lsclusters
Step 2: Restart the Postgres cluster
$ sudo pg_ctlcluster 12 main start
Make sure to replace 12 with your version of Postgres
Step 3: Check again and connect
$ pg_lsclusters
$ sudo -i -u postgres
$ psql
I got this error when I restored my database from last pg_basebackup backup file. After that when I tried to connect database(psql), I was getting the same error. The error was resolved, when I updated pg_hba.conf file and wherever "peer" authentication was there I replaced that with "md5" and then restarted postgres services. After that, the problem was resolved.
This error happened to me after my mac mini got un-plugged (so forced shutdown), and all I had to do to fix it was restart
I have the same issue with postgres 11 on my mac. I get this error every time after restart
psql: could not connect to server: No such file or directory
Is the server running locally and accepting connections on
Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"?
As a temporary fix I do
brew services stop postgresql#11
brew services start postgresql#11
My problem happened after a brew update so I've ran
pg_ctl -D /usr/local/var/postgres start
and I've got this result:
FATAL: database files are incompatible with server 2021-07-07 13:27:21.692 CEST [70896] DETAIL: The data directory was initialized by PostgreSQL version 12, which is not compatible with this version 13.2. stopped waiting
I've ran
brew postgresql-upgrade-database
FATAL: could not load server certificate file "/etc/ssl/certs/ssl-cert-snakeoil.pem": No such file or directory
LOG: database system is shut down
pg_ctl: could not start server
I have a missing ssl-cert-snakeoil.pem file so i created it using make-ssl-cert generate-default-snakeoil --force-overwrite And it worked fine.
In my case, I had to run journalctl -xe, and it showed that my disk was full. I then deleted some .gz items from /var/log and I could again restart the postgresql.
I'm on Kali Linux. I had to remove the brew version of postgresql with
brew uninstall postgresql
sudo -u postgres psql got me into root postgres
Simply running these commands from the installation steps in the official PostgreSQL docs worked for me (I'm on Fedora 33):
# Optionally initialize the database and enable automatic start:
sudo /usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl enable postgresql-13
sudo systemctl start postgresql-13
RHEL Installation link
kali users pls do this
sudo service postgresql restart
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
We don’t allow questions seeking recommendations for books, tools, software libraries, and more. You can edit the question so it can be answered with facts and citations.
Closed 1 year ago.
The community reviewed whether to reopen this question 1 year ago and left it closed:
Original close reason(s) were not resolved
Improve this question
I'm using the PostgreSQL database for my Ruby on Rails application (on Mac OS X 10.9).
Are there any detailed instructions on how to upgrade PostgreSQL database?
I'm afraid I will destroy the data in the database or mess it up.
Assuming you've used home-brew to install and upgrade Postgres, you can perform the following steps.
Stop current Postgres server:
launchctl unload ~/Library/LaunchAgents/homebrew.mxcl.postgresql.plist
Initialize a new 10.1 database:
initdb /usr/local/var/postgres10.1 -E utf8
run pg_upgrade (note: change bin version if you're upgrading from something other than below):
pg_upgrade -v \
-d /usr/local/var/postgres \
-D /usr/local/var/postgres10.1 \
-b /usr/local/Cellar/postgresql/9.6.5/bin/ \
-B /usr/local/Cellar/postgresql/10.1/bin/
-v to enable verbose internal logging
-d the old database cluster configuration directory
-D the new database cluster configuration directory
-b the old PostgreSQL executable directory
-B the new PostgreSQL executable directory
Move new data into place:
cd /usr/local/var
mv postgres postgres9.6
mv postgres10.1 postgres
Restart Postgres:
launchctl load ~/Library/LaunchAgents/homebrew.mxcl.postgresql.plist
Check /usr/local/var/postgres/server.log for details and to make sure the new server started properly.
Finally, re-install the rails pg gem
gem uninstall pg
gem install pg
I suggest you take some time to read the PostgreSQL documentation to understand exactly what you're doing in the above steps to minimize frustrations.
Despite all answers above, here goes my 5 cents.
It works on any OS and from any-to-any postgres version.
Stop any running postgres instance;
Install the new version and start it; Check if you can connect to the new version as well;
Change old version's postgresql.conf -> port from 5432 to 5433;
Start the old version postgres instance;
Open a terminal and cd to the new version bin folder;
Run pg_dumpall -p 5433 -U <username> | psql -p 5432 -U <username>
Stop old postgres running instance;
Here is the solution for Ubuntu users
First we have to stop postgresql
sudo /etc/init.d/postgresql stop
Create a new file called /etc/apt/sources.list.d/pgdg.list and add below line
deb http://apt.postgresql.org/pub/repos/apt/ utopic-pgdg main
Follow below commands
wget -q -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | sudo apt-key add -
sudo apt-get update
sudo apt-get install postgresql-9.4
sudo pg_dropcluster --stop 9.4 main
sudo /etc/init.d/postgresql start
Now we have everything, just need to upgrade it as below
sudo pg_upgradecluster 9.3 main
sudo pg_dropcluster 9.3 main
That's it. Mostly upgraded cluster will run on port number 5433. Check it with below command
sudo pg_lsclusters
If you are using homebrew and homebrew services, you can probably just do:
brew services stop postgresql
brew upgrade postgresql
brew postgresql-upgrade-database
brew services start postgresql
I think this might not work completely if you are using advanced postgres features, but it worked perfectly for me.
Update: This process is the same for upgrading 9.5 through at least 11.5; simply modify the commands to reflect versions 9.6 and 10, where 9.6 is the old version and 10 is the new version. Be sure to adjust the "old" and "new" directories accordingly, too.
I just upgraded PostgreSQL 9.5 to 9.6 on Ubuntu and thought I'd share my findings, as there are a couple of OS/package-specific nuances of which to be aware.
(I didn't want to have to dump and restore data manually, so several of the other answers here were not viable.)
In short, the process consists of installing the new version of PostgreSQL alongside the old version (e.g., 9.5 and 9.6), and then running the pg_upgrade binary, which is explained in (some) detail at https://www.postgresql.org/docs/9.6/static/pgupgrade.html .
The only "tricky" aspect of pg_upgrade is that failure to pass the correct value for an argument, or failure to be logged-in as the correct user or cd to the correct location before executing a command, may lead to cryptic error messages.
On Ubuntu (and probably Debian), provided you are using the "official" repo, deb http://apt.postgresql.org/pub/repos/apt/ xenial-pgdg main, and provided you haven't changed the default filesystem paths or runtime options, the following procedure should do the job.
Install the new version (note that we specify the 9.6, explicitly):
sudo apt install postgresql-9.6
Once installation succeeds, both versions will be running side-by-side, but on different ports. The installation output mentions this, at the bottom, but it's easy to overlook:
Creating new cluster 9.6/main ...
config /etc/postgresql/9.6/main
data /var/lib/postgresql/9.6/main
locale en_US.UTF-8
socket /var/run/postgresql
port 5433
Stop both server instances (this will stop both at the same time):
sudo systemctl stop postgresql
Switch to the dedicated PostgreSQL system user:
su postgres
Move into his home directory (failure to do this will cause errors):
cd ~
pg_upgrade requires the following inputs (pg_upgrade --help tells us this):
When you run pg_upgrade, you must provide the following information:
the data directory for the old cluster (-d DATADIR)
the data directory for the new cluster (-D DATADIR)
the "bin" directory for the old version (-b BINDIR)
the "bin" directory for the new version (-B BINDIR)
These inputs may be specified with "long names", to make them easier to visualize:
-b, --old-bindir=BINDIR old cluster executable directory
-B, --new-bindir=BINDIR new cluster executable directory
-d, --old-datadir=DATADIR old cluster data directory
-D, --new-datadir=DATADIR new cluster data directory
We must also pass the --new-options switch, because failure to do so results in the following:
connection to database failed: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/var/lib/postgresql/.s.PGSQL.50432"?
This occurs because the default configuration options are applied in the absence of this switch, which results in incorrect connection options being used, hence the socket error.
Execute the pg_upgrade command from the new PostgreSQL version:
/usr/lib/postgresql/9.6/bin/pg_upgrade --old-bindir=/usr/lib/postgresql/9.5/bin --new-bindir=/usr/lib/postgresql/9.6/bin --old-datadir=/var/lib/postgresql/9.5/main --new-datadir=/var/lib/postgresql/9.6/main --old-options=-cconfig_file=/etc/postgresql/9.5/main/postgresql.conf --new-options=-cconfig_file=/etc/postgresql/9.6/main/postgresql.conf
Logout of the dedicated system user account:
exit
The upgrade is now complete, but, the new instance will bind to port 5433 (the standard default is 5432), so keep this in mind if attempting to test the new instance before "cutting-over" to it.
Start the server as normal (again, this will start both the old and new instances):
systemctl start postgresql
If you want to make the new version the default, you will need to edit the effective configuration file, e.g., /etc/postgresql/9.6/main/postgresql.conf, and ensure that the port is defined as such:
port = 5432
If you do this, either change the old version's port number to 5433 at the same time (before starting the services), or, simply remove the old version (this will not remove your actual database content; you would need to use apt --purge remove postgresql-9.5 for that to happen):
apt remove postgresql-9.5
The above command will stop all instances, so you'll need to start the new instance one last time with:
systemctl start postgresql
As a final point of note, don't forget to consider pg_upgrade's good advice:
Upgrade Complete
----------------
Optimizer statistics are not transferred by pg_upgrade so,
once you start the new server, consider running:
./analyze_new_cluster.sh
Running this script will delete the old cluster's data files:
./delete_old_cluster.sh
The user manual covers this topic in depth. You can:
pg_upgrade in-place; or
pg_dump and pg_restore.
If in doubt, do it with dumps. Don't delete the old data directory, just keep it in case something goes wrong / you make a mistake; that way you can just go back to your unchanged 9.3 install.
For details, see the manual.
If you're stuck, post a detailed question explaining how you're stuck, where, and what you tried first. It depends a bit on how you installed PostgreSQL too, as there are several different "distributions" of PostgreSQL for OS X (unfortunately). So you'd need to provide that info.
Standing on the shoulders of the other poor creatures trodding through this muck, I was able to follow these steps to get back up and running after an upgrade to Yosemite:
Assuming you've used home-brew to install and upgrade Postgres, you can perform the following steps.
Stop current Postgres server:
launchctl unload ~/Library/LaunchAgents/homebrew.mxcl.postgresql.plist
Initialize a new 9.4 database:
initdb /usr/local/var/postgres9.4 -E utf8
Install postgres 9.3 (as it was no longer present on my machine):
brew install homebrew/versions/postgresql93
Add directories removed during Yosemite upgrade:
mkdir -p /usr/local/var/postgres/{pg_tblspc,pg_twophase,pg_stat_tmp}/touch /usr/local/var/postgres/{pg_tblspc,pg_twophase,pg_stat_tmp}/.keep
run pg_upgrade:
pg_upgrade -v -d /usr/local/var/postgres -D /usr/local/var/postgres9.4 -b /usr/local/Cellar/postgresql93/9.3.5/bin/ -B /usr/local/Cellar/postgresql/9.4.0/bin/
Move new data into place:
cd /usr/local/var
mv postgres postgres9.3
mv postgres9.4 postgres
Restart Postgres:
launchctl load ~/Library/LaunchAgents/homebrew.mxcl.postgresql.plist
Check /usr/local/var/postgres/server.log for details and to make sure the new server started properly.
Finally, re-install related libraries?
pip install --upgrade psycopg2
gem uninstall pg
gem install pg
Looks like the solution has been baked into Homebrew now:
$ brew info postgresql
...
==> Caveats
To migrate existing data from a previous major version of PostgreSQL run:
brew postgresql-upgrade-database
....
On Windows I kept facing different errors messages when trying to use pg_upgrade.
Saved a lot of time for me to just:
Backup DB
Uninstall all copies of PostgreSQL
Install 9.5
Restore DB
This did it for me.
https://gist.github.com/dideler/60c9ce184198666e5ab4
Short and to the point. I honestly don't aim to understand the guts of PostgreSQL, I want to get stuff done.
My solution for upgrading from Postgresql 11 to Postgresql 12 on Windows 10 is the following.
As a first remark you will need to be able stop and start the Postgresql service. You can do this by the following commands in Powershell.
Start:
pg_ctl start -D “d:\postgresql\11\data”
Stop:
pg_ctl stop -D “d:\postgresql\11\data”
Status:
pg_ctl status -D “d:\postgresql\11\data”
It would be wise to make a backup before doing the upgrade. The Postgresql 11 instance must be running. Then to copy the globals do
pg_dumpall -U postgres -g -f d:\bakup\postgresql\11\globals.sql
and then for each database
pg_dump -U postgres -Fc <database> > d:\backup\postgresql\11\<database>.fc
or
pg_dump -U postgres -Fc -d <database> -f d:\backup\postgresql\11\<database>.fc
If not already done install Postgresql 12 (as Postgresql 11 is also installed this will be on port 5433)
Then to do the upgrade as follows:
1) Stop Postgresql 11 service (see above)
2) Edit the postgresql.conf file in d:\postgresql\12\data and change port = 5433 to port = 5432
3) Edit the windows user environment path (windows start then type env) to point to Postgresql 12 instead of Postresql 11
4) Run upgrade by entering the following command.
pg_upgrade `
-b “c:\program files\postgresql\11\bin” `
-B “c:\program files\postgresql\12\bin” `
-d “d:\postgresql\11\data” `
-D “d:\postgresql\12\data” --username=postgres
(In powershell use backtick (or backquote) ` to continue the command on the next line)
5) and finally start the new Postgresql 12 service
pg_ctl start -D “d:\postgresql\12\data”
My solution was to do a combination of these two resources:
https://gist.github.com/tamoyal/2ea1fcdf99c819b4e07d
and
http://www.gab.lc/articles/migration_postgresql_9-3_to_9-4
The second one helped more then the first one. Also to not, don't follow the steps as is as some are not necessary.
Also, if you are not being able to backup the data via postgres console, you can use alternative approach, and backup it with pgAdmin 3 or some other program, like I did in my case.
Also, the link: https://help.ubuntu.com/stable/serverguide/postgresql.html
Helped to set the encrypted password and set md5 for authenticating the postgres user.
After all is done, to check the postgres server version run in terminal:
sudo -u postgres psql postgres
After entering the password run in postgres terminal:
SHOW SERVER_VERSION;
It will output something like:
server_version
----------------
9.4.5
For setting and starting postgres I have used command:
> sudo bash # root
> su postgres # postgres
> /etc/init.d/postgresql start
> /etc/init.d/postgresql stop
And then for restoring database from a file:
> psql -f /home/ubuntu_username/Backup_93.sql postgres
Or if doesn't work try with this one:
> pg_restore --verbose --clean --no-acl --no-owner -h localhost -U postgres -d name_of_database ~/your_file.dump
And if you are using Rails do a bundle exec rake db:migrate after pulling the code :)
For Mac via homebrew:
brew tap petere/postgresql,
brew install <formula> (eg: brew install petere/postgresql/postgresql-9.6)
Remove old Postgres:
brew unlink postgresql
brew link -f postgresql-9.6
If any error happen, don't forget to read and follow brew instruction in each step.
Check this out for more: https://github.com/petere/homebrew-postgresql
On Windows 10 since I had npm, I installed rimraf package. npm install rimraf -g
Backup all your databases one by one using command pg_dump -U $username --format=c --file=$mydatabase.sqlc $dbname
Then Installed Latest PostgreSQL Version i.e. 11.2 which prompted me to use port 5433 this time.
Followed by Uninstall of older versions of PostgreSQL mine was 10. Note the uninstaller may give a warning of not deleting folder C:\PostgreSQL\10\data. That's why we have the next step using rimraf to permanently delete the folder and it's sub-folders.
change into PostgreSQL install directory and ran the command rimraf 10. 10 is a directory name. Note use your older version of PostgreSQL i.e. 9.5 or something.
Now add C:\PostgreSQL\pg11\bin, C:\PostgreSQL\pg11\lib into the Windows environmental variables. Note my new installed version is 11 thus why I am using pg11.
Navigate to C:\PostgreSQL\data\pg11 then open postgresql.conf edit port = 5433 to port = 5432
That's it. Open cmd and type psql -U postgres
You can now restore all your backed databases one by one using the command pg_restore -U $username --dbname=$databasename $filename
I think this is best link for your solution to update postgres to 9.6
https://sandymadaan.wordpress.com/2017/02/21/upgrade-postgresql9-3-9-6-in-ubuntu-retaining-the-databases/
I find I have the wreckage of two old PostgreSQL installations on Ubuntu 10.04:
$ pg_lsclustersVersion Cluster Port Status Owner Data directory Log file
Use of uninitialized value in printf at /usr/bin/pg_lsclusters line 38.
8.4 main 5432 down /var/lib/postgresql/8.4/main /var/log/postgresql/postgresql-8.4-main.log
Use of uninitialized value in printf at /usr/bin/pg_lsclusters line 38.
9.1 main 5433 down /var/lib/postgresql/9.1/main /var/log/postgresql/postgresql-9.1-main.log
$
Attempts to perform basic functions return errors, for instance:
createuser: could not connect to database postgres: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"?
More information comes when I try to start the database server:
$ sudo /etc/init.d/postgresql start
* Starting PostgreSQL 9.1 database server
* Error: The cluster is owned by user id 109 which does not exist any more
...fail!
$
My question: how do I completely remove both clusters and set up a new one? I've tried removing, purging, and reinstalling postgresql, following the advice here: https://stackoverflow.com/a/2748644/621762. Now pg_lsclusters shows no clusters in existence, but the No such file or directory error persists when I try to createuser, createdb or run psql. What have I failed to do?
First, that answer you linked to was pretty unsafe - hand-editing /etc/passwd ?!? dselect where an apt wildcard would do? Crazy stuff. I'm not surprised you're having issues.
As for the no such file or directory messages: You need to make sure you have a running PostgreSQL server ("cluster") before you can use admin commands like createdb, because they make a connection to the server. The No such file or directory message is telling you that the server doesn't exist or isn't running.
Here's what's happening:
Ubuntu uses pg_wrapper to manage multiple concurrent PostgreSQL instances. The issues you're having are really with pg_wrapper.
Ideally you would've just used pg_dropcluster to get rid of the unwanted clusters. Unfortunately, by following bad advice it sounds like you've got your system into a bit of a messed-up state where the PostgreSQL packages are half-installed and kind of mangled. You need to either repair the install, or totally clean it out.
I'd clean it out. I'd recommend:
Verify that pg_lsclusters lists no database clusters
apt-get --purge remove postgresql\* - this is important
Remove /etc/postgresql/
Remove /etc/postgresql-common
Remove /var/lib/postgresql
userdel -r postgres
groupdel postgres
apt-get install postgresql-common postgresql-9.1 postgresql-contrib-9.1 postgresql-doc-9.1
It's possible that the apt-get --purge step will fail because you've removed the user IDs, etc. Re-creating the postgres user ID with useradd -r -u 109 postgres should allow you to re-run the purge successfully then delete the user afterwards.
This answer is not directly about removing a postgres instance, rather, about resoliving the issue,
Error: The cluster is owned by user ...
I got this error while trying to spin up a docker container pointed to a postgres data directory that was produced via a different container (on a different host machine).
The error is directly related to directory ownership. In my case, the system was unable to find the user that certain postgres directories was owned by in the current environment. By re-owning those directories to the right user resolves the issue. Following is an example mapping (that worked for me):
chown -R postgres:postgres /var/lib/postgresql
chown -R postgres:postgres /etc/postgresql
chown -R postgres:postgres /var/log/postgresql
chown -R postgres:postgres /var/run/postgresql