I am trying to start Minikube with the following command:
Command:minikube start --vm-driver hyperv
It shows the below error:
Error:'minikube' Synthetic Ethernet Port (Instance ID
DAFC6CDF-E16C-42D4-920B-3C180547A0A6): Failed to Power on with Error
'Attempt to access invalid address.' (0x800701E7). (Virtual machine ID
AB87A24C-7B7E-41CA-B63D-A420FFCC508F) 'minikube' No available MAC
address for "Network Adapter".
Related
while running vagrant up command on win machine I am getting the below error:
==> kubemaster: Booting VM...
There was an error while executing VBoxManage, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["startvm", "29046172-fba4-4516-9e28-64ece907dcb7", "--type", "headless"]
Stderr: VBoxManage.exe: error: Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter #3' (VERR_INTNET_FLT_IF_NOT_FOUND).
VBoxManage.exe: error: Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND)
VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component ConsoleWrap, interface IConsole
I resolved problem by installing latest virtualbox version.
WARNING: Host is already in use by another container
ERROR: for rabbitmq Cannot start service rabbitmq: driver failed programming external connectivity
Creating shopy-backend_db_1 ... done
Creating shopy-backend_redis_1 ... done
ERROR: for rabbitmq Cannot start service rabbitmq: driver failed programming external connectivity on endpoint rabbitmq (4a8903254c20ef83fdd912bc2e22653ad1980de4a85021ce3bb993bab57993ba):
Error starting userland proxy: listen tcp4 0.0.0.0:5672: bind: address already in use
ERROR: Encountered errors while bringing up the project.ca-backend_redis_1 ... done
ERROR: for rabbitmq Cannot start service rabbitmq: driver failed programming external connectivity on endpoint rabbitmq (4a8903254c20ef83fdd912bc2e22653ad1980de4a85021ce3bb993bab57993ba): Error starting userland proxy: listen tcp4 0.0.0.0:5672: bind: address already in use
ERROR: Encountered errors while bringing up the project.
If you face this error it means that another rabbitmq service instance is running already and will be occupying port 5672.
You should stop the service as follows:
sudo systemctl stop rabbitmq-server.service
I am trying to install minikube on Windows10 Home but am getting this error. Why?
C:\WINDOWS\system32>minikube start --driver=hyperv
* minikube v1.11.0 on Microsoft Windows 10 Home 10.0.19041 Build 19041
* Using the hyperv driver based on existing profile
* Starting control plane node minikube in cluster minikube
* Creating hyperv VM (CPUs=2, Memory=4000MB, Disk=20000MB) ...
panic: runtime error: index out of range [0] with length 0
goroutine 60 [running]:
github.com/docker/machine/drivers/hyperv.hypervAvailable(0xc00008cff0, 0xc0002cdd00)
/go/pkg/mod/github.com/machine-drivers/machine#v0.7.1-0.20200323212942-41eb826190d8/drivers/hyperv/powershell.go:64 +0x105
github.com/docker/machine/drivers/hyperv.(*Driver).PreCreateCheck(0xc000439ec0, 0x0, 0x0)
/go/pkg/mod/github.com/machine-drivers/machine#v0.7.1-0.20200323212942-41eb826190d8/drivers/hyperv/hyperv.go:171 +0x3b
k8s.io/minikube/pkg/minikube/machine.(*LocalClient).Create(0xc000043540, 0xc000439f20, 0x0, 0x0)
/app/pkg/minikube/machine/client.go:221 +0x3f5
k8s.io/minikube/pkg/minikube/machine.timedCreateHost.func2(0x1e80ea0, 0xc000043540, 0xc000439f20, 0xc0006c0540, 0xc0004c6af0)
/app/pkg/minikube/machine/start.go:184 +0x42
created by k8s.io/minikube/pkg/minikube/machine.timedCreateHost
/app/pkg/minikube/machine/start.go:183 +0x10e
C:\WINDOWS\system32>minikube status
E0627 09:15:44.982608 38068 status.go:132] The "minikube" host does not exist!
minikube
type: Control Plane
host: Nonexistent
kubelet: Nonexistent
apiserver: Nonexistent
kubeconfig: Nonexistent
C:\WINDOWS\system32>
Check Hyper-V is disabled. Run PowerShell and execute $hyperv.State -eq "Enabled" command
Disable Hyper-V (if it is running) by executing following command in Powershell(in admin mode) Disable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V-All. Reboot your PC
Run CMD as an administrator
Try to execute minikube delete if it fails the try to remove '.minikube' folder manually from C:\Users{your username}
Try to execute minikube start
Execute minikube status command to verify it is running
Hope it will help
I'm running Ubuntu 17.04 (zesty) on a Dell XPS 13 (3854 MB of RAM and Intel Core i5-5200U CPU # 2.20GHz) and trying to start up Minikube, but I'm getting a couple errors when I try to start it up.
➜ minikube version
minikube version: v0.22.3
➜ kubectl version
Client Version: version.Info{Major:"1", Minor:"7", GitVersion:"v1.7.5", GitCommit:"17d7182a7ccbb167074be7a87f0a68bd00d58d97", GitTreeState:"clean", BuildDate:"2017-08-31T09:14:02Z", GoVersion:"go1.8.3", Compiler:"gc", Platform:"linux/amd64"}
The connection to the server localhost:8080 was refused - did you specify the right host or port?
I have VM VirtualBox Version 5.2.0 r118431 (Qt5.7.1). I've checked the BIOS settings and have virtualization enabled.
➜ minikube start
Starting local Kubernetes v1.7.5 cluster...
Starting VM...
E1025 09:49:40.206594 22972 start.go:146] Error starting host: Error starting stopped host: Unable to start the VM: /usr/bin/VBoxManage startvm minikube --type headless failed:
VBoxManage: error: The virtual machine 'minikube' has terminated unexpectedly during startup with exit code 1 (0x1)
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component MachineWrap, interface IMachine
.
Retrying.
E1025 09:49:40.207051 22972 start.go:152] Error starting host: Error starting stopped host: Unable to start the VM: /usr/bin/VBoxManage startvm minikube --type headless failed:
VBoxManage: error: The virtual machine 'minikube' has terminated unexpectedly during startup with exit code 1 (0x1)
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component MachineWrap, interface IMachine
I've tried some suggests that I've found online, like running ~/rm -rf .minikube/ and trying to start up minikube again. I've tried running minikube stop followed by a minikube delete and then trying to start minikube again. I've tried specifying the virtualbox driver when starting as well minikube start --vm-driver=virtualbox. These aren't working, I still get the same error.
This looks like an issue with your Virtualbox installation, have you tried reinstalling it?
sudo apt-get purge virtualbox virtualbox-dkms
sudo apt-get install virtualbox-5.1
Try to enable virtual box in BIOS system, in my case it resovled problem
I am doing this as part of the Ambari setup. followed the steps for quick start with Ambari and Vagrant.
I am using this CentOS 6.4 image:
https://github.com/u39kun/ambari-vagrant/blob/master/centos6.4/Vagrantfile
I did this on Google Cloud from RHEL 7.2 host and with VirtualBox 5, but went to install, as suggested, CentOS 6.4 guests.
I successfully installed and configured the pre-requisities (with tweaking required to make vbox 5 work on RHEL 7.2).
When I try to bring up 6 hosts, I see the timeouts where machines are not coming up.
Host machine I am running on is fast - 32 cores, 64 GB RAM, 500 GB SSD ...
Does anyone know what might be the issue?
Is there some firewall I need to turn off, etc.?
[<myuser>#ambari-host-rhel7 centos6.4]$ ./up.sh 6
Bringing machine 'c6401' up with 'virtualbox' provider...
==> c6401: Box 'centos6.4' could not be found. Attempting to find and install... c6401: Box Provider: virtualbox c6401: Box Version: >= 0
==> c6401: Box file was not detected as metadata. Adding it directly...
==> c6401: Adding box 'centos6.4' (v0) for provider: virtualbox c6401: Downloading: http://developer.nrel.gov/downloads/vagrant-boxes/CentOS-6.4-x86_64-v20130427.box
==> c6401: Box download is resuming from prior download progress
==> c6401: Successfully added box 'centos6.4' (v0) for 'virtualbox'!
==> c6401: Importing base box 'centos6.4'...
==> c6401: Matching MAC address for NAT networking...
==> c6401: Setting the name of the VM: centos64_c6401_1456171923223_2329
==> c6401: Clearing any previously set network interfaces...
==> c6401: Preparing network interfaces based on configuration... c6401: Adapter 1: nat c6401: Adapter 2: hostonly
==> c6401: Forwarding ports... c6401: 22 (guest) => 2222 (host) (adapter 1)
==> c6401: Running 'pre-boot' VM customizations...
==> c6401: Booting VM...
==> c6401: Waiting for machine to boot. This may take a few minutes... c6401: SSH address: 127.0.0.1:2222 c6401: SSH username: vagrant c6401: SSH auth method: private key
Timed out while waiting for the machine to boot. This means thatVagrant was unable to communicate with the guest machine withinthe configured ("config.vm.boot_timeout" value) time period.If you look above, you should be able to see the error(s) thatVagrant had when attempting to connect to the machine. These errorsare usually good hints as to what may be wrong.If you're using a custom box, make sure that networking is properlyworking and you're able to connect to the machine. It is a commonproblem that networking isn't setup properly in these boxes.Verify that authentication configurations are also setup properly,as well.If the box appears to be booting properly, you may want to increasethe timeout ("config.vm.boot_timeout") value.
As a final step I get this summary error:
There was an error while executing `VBoxManage`, a CLI used by Vagrantfor controlling VirtualBox.
The command and stderr is shown below.
Command: ["import", "/home/<me>/.vagrant.d/boxes/centos6.4/0/virtualbox/box.ovf", "--vsys", "0", "--vmname", "CentOS-6.4-x86_64_1456173504674_45962", "--vsys", "0", "--unit", "9", "--disk", "/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk"]
Stderr: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interpreting /home/<me>/.vagrant.d/boxes/centos6.4/0/virtualbox/box.ovf...OK.0%...
Progress state: VBOX_E_FILE_ERRORVBoxManage: error: Appliance import failedVBoxManage: error: Could not create the imported medium '/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk'.
VBoxManage: error: VMDK: cannot write allocated data block in '/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk' (VERR_DISK_FULL)
VBoxManage: error: Details: code VBOX_E_FILE_ERROR (0x80bb0004), component ApplianceWrap, interface IAppliance
VBoxManage: error: Context: "RTEXITCODE handleImportAppliance(HandlerArg*)" at line 877 of file VBoxManageAppliance.cpp
Any ideas what might be going on?
Do you still have free space on your drive ?
Generally VERR_DISK_FULL indicates that the hard drive is full, it cannot provision enough space for the vdi files.