I have a master branch and a main branch in git-hub. This was not intentional I realized that I have been pushing with master so everything went to master branch. However git-hub is now using main instead of master as first position. How can I move my master branch into main branch?
There are multipe ways to achieve this, but with pure git it can be done as follows:
#Change to the main branch
git checkout main
#Rebase the main branch on top of the current master. In easy words, go to the last point the two branches have in common, then add all the changes master did in the meanwhile and then add the changes done to main. If main is empty this is equivalent to
# git checkout master; git branch -D main; git checkout -b main
#which deletes the current main and then copies master over to main
git rebase master
# push back to GitHub (--force, because rabse does not add a commit, but changes the status, so push will be rejected without it)
git push --force
You can delete or rename a branch through the github web interface by visiting
https://github.com/YourName/YourRepo/branches
At time of writing you can access that page from the front page of your repository through the branches link:
And you can click the writing implement buttons to rename their associated branch:
It is worth noting that deleting and renaming branches through github is just as potentially destructive as doing it with CLI git or a GUI git client. You can of course re-push branches from your local clone, but you should make sure that clone is up to date before proceeding if you feel unsure.
Create a PR from master to main in the GitHub Webinterface.
If you want to do it local:
git checkout main
git merge master
git push
Set local master to track remote main:
git branch --set-upstream-to origin/main master
For first pull it will show error refusing to merge unrelated histories so you can pull with git pull origin main --allow-unrelated-histories
Push it into the main branch in GitHub.
Is it possible to discard a file when merging a pull-request? Also, how should I edit a file if there is no conflict and then merge the pull-request?
Thanks! :)
In the PR you should have two branches let's call them master and develop.
Checkout to the develop branch in your local env.
git checkout develop
Then you can discard any file in this branch with the checkout command
git checkout master DISCARDED_FILE_WITH_PATH
This command above will grab the file from the master, so basically you discard the change.
Then commit the change
git commit -am 'discard the file'
and push back to the repo
git push
If you reload the PR, the file will missing.
In one of case I have created an branch and started to work on. I keep on commit & push changes in local branch but did not merge in master & neither pulled any changes from master.
Now I'm done with local branch changes. I followed derekgourlay tutorial & followed following steps to merge my project.
git fetch origin
git rebase −p origin/develop
First it game me number of conflict which was obvious but changes that I committed in my local branch those are not there after merge.
Am I missing anything. Any suggestion?
You can merge develop branch with your feature branch.
$ git checkout feature
$ git pull origin develop # pull (fetch + merge) develop branch into feature
$ git push origin HEAD # update remote/feature
Essentially, I followed these steps: https://github.com/edx/edx-platform/wiki/How-to-Rebase-a-Pull-Request
The only difference is that I used get rebase onto master to sync master into my feature branch. This is my workflow:
git checkout master
git pull
git checkout <my branch>
git rebase onto master
git push -f origin <my branch>
However, when I now go into github to do a pull request, it is showing old commits that have already been merged.
Is there a way to fork from a specific branch on GitHub? … For example, moodle has many branches (1.9, 2.0 … and so on). Can a clone be performed of just branch 1.9 and not the master branch always? Is it possible to clone a specific branch onto my PC?
I don’t know a native way yet, but you can do it following this recipe:
Fork the repository in question (called ‘upstream’) on the GitHub website to your workspace there.
Run the GitHub desktop application and clone the repository onto your PC.
Use the GitHub desktop application to open a shell in the repository. (The git commands are not available from the default PowerShell unless you configure that manually.)
Set the source repository as upstream:
git remote add upstream https://github.com/{user}/{source-repo}.git
Fetch the full upstream repository. (Right now, you only have a copy of its master branch.)
git fetch upstream
Make your file system copy the branch you want and give it any name:
git checkout upstream/{branch-in-question}
git checkout -b temporary
Publish your repo using the GitHub desktop application.
On the GitHub website, open your repository and click ‘settings’.
Change the “Default branch” to ‘temporary’. (Just change the drop-down menu, you don’t need to click the “Rename” button.)
Go back to your repository, go to the ‘branches’ tab, now you can delete the “master” branch.
Delete the master branch on your shell and make a new master branch:
git branch -d master
git branch master
git checkout master
git -d temporary
Once more, publish your repo using the GitHub desktop application.
On the GitHub website, open your repository and click ‘settings’.
Change the “Default branch” back to the (new) ‘master’ branch.
Go back to your repository, go to the ‘branches’ tab, now you can delete the “temporary” branch.
This should be what you were looking for. Perhaps GitHub will provide a more convenient way to do this in future (e.g., clicking “Fork” from a project’s branch results in exactly this behaviour).
Cloning means that you create a copy of the whole repository in your account including all branches and tags. However you are free to switch and track branches however you like.
No command line needed. Just create a new branch in your forked repository in GitHub. GitHub will ask you if you want to clone/mirror this new branch from the upstream repository. You can give any name to the new branch.
Yes, you can clone the single branch. For example, you have a branch named release1.0. If you would like to clone this branch into your pc then use the following line of code:
$ git clone git#bitbucket.org:git_username/git_repository_example -b release1.0 --single-branch
For those who don't like working with command-line. Here is a simple guide using the desktop client for GitHub:
Click the fork button of the repo on GitHub.com:
Make sure you have the desktop client installed
Click this button:
Clone the repo
In the desktop client, select the desired branch
Select the branch you'd like to work on and you're done
I'm posting here the method I've used.
Like the OP I wanted to only copy/fork one branch. But couldn't find an easy way.
in your repo create a new branch. It doesn't need to have the same name as the branch you want to fork
once created, verify that it is the selected branch, and click "Compare"
reverse the order of comparison (I have a userscript for that, see my profile if it's something you want to test).
the "base" repository must be yours, with the branch you've created
the "head" repository is the original, and the branch is the branch you want to fork
hit "create pull request" and continue until the PR is applied
That's it. You have the branch forked.
I'm using bitbucket but I'm sure this would work for GitHub as well.
Create a new repository
Checkout the branch using GitExtensions
Click Push to open the Push dialog
Set the destination URL to the new repository
Set the destination branch to "master"
Push
Your new repository will have the full history of the one branch only (not all branches like forking will have).
A fast, alternative approach is to create your own new repo.
Go to https://github.com/new and make a new repo. Do not initialize with README.
Scroll down to get your git remote
Then:
git remote rm origin
git config master.remote origin
git config master.merge refs/heads/master
// Run code from above image
git push --set-upstream origin yourbranchname
You will have a new repo with the original repo's code and a branch that can be made into a pull request.
SOLUTION:
For remote repository on GitHub and local repository
After fork all branches to your GitHub repository, you can delete Redundant branches in your GitHub repository.
And then you can only clone the branches you need to local.
Step One
Step Two
Only For local repository
git clone -b <branch name> --single-branch <repository>
If you want to further save your disk space, you can clone remote repository without history:
git clone -b <branch name> --depth 1 <repository>
notice: --depth implies --single-branch unless --no-single-branch is given.
https://git-scm.com/docs/git-clone
Switch to the branch you need in source repo
Click "Fork". You'll get forked master and the branch you're in.
I don't know how it works with more branches, but for my needs worked pretty well.