I was messing around in python and ran a few programs from terminal and noticed that using the up arrow you could backtrack to previously ran program. I thought this was a nice feature but I'm wondering where and which file I have to edit to delete past commands?
Note: Restarting VS Code doesn't remove these commands from terminal history
Related
I ran a python script that had important timings inside the script but I accidently killed the terminal.
Is there a way to see terminal history outputs somewhere?
I tried to find an answer to my question but only thing I could find is how to find the history of commands I have ran.
When trying to run a file or just open the terminal in VS Code, the terminal opens for a half second and then promptly closes without error messages.
I've tried updating VS Code, and external libraries/environments. I'm thinking I might need to fully uninstall and reinstall, but hoping there is a easier fix.
Ideally, the integrated VS Code terminal, depending on the context, the type of the folder and the extension, executes some commands. For example, when opening a folder containing a Python virtual environment in VS code, the environment is recognized and activated (by the python extension) by default when opening a new integrated terminal instance (situation 1). This is done by running some command similar to source /path/to/venv/bin/activate.
Or, when using the ROS extension to debug nodes, selecting "Start Debugging (F5)" uses the launch.json file to start some nodes and finally starts debugging the desired code. To do so also, there is some command that is executed (also by he ROS extension, I assume) in the integrated terminal (situation 2) to start the debugging process. In case of debugging ROS nodes, the command usually looks something like /usr/bin/env /bin/sh /tmp/someFileName.
But, unfortunately, both of the above mentioned situations fail. I believe this happens because while the extension tries to run these two commands within their respective integrated terminals, the commands do not actually get executed in either situation. Instead, these commands are printed on the top of the terminal, but the state of the terminal is unchanged (as opposed to when the commands would have been executed, in which case depending on the commands some actions are performed). Here are two images to show what I mean. Top, situation 1 and bottom, situation 2.
The fact that these two commands are printed on top of the terminal as soon as the a new terminal instance is opened tells me that the extension tries to execute them, but they do not work for some unknown reasons.
Just to be clear, both of them are run in a seperate VC Code window, they have nothing to do with each other. When I manually run both the commands in their respective terminals I do get the desired results.
Now, I am unsure exactly how to name this issue. But I think this is surely an issue with the integrated terminal, and not a problem of the extensions. I am not sure how one could reproduce this problem.
I did a clean reinstall of VS code by deleting %APPDATA%\Code and %USERPROFILE%\.vscode. Because I am using this on WSL, there is only ~/.vscode-server on the ubuntu side. I manually uninstalled all extensions on WSL but did not delete this folder, in fear of breaking something. The problem still persisted. I have also created an issue on the VS Code GitHub page with nearly the same information.
I am unsure if this is a bug or is there something wrong with my settings. Does anyone know how I could fix this? For smaller use-cases I can still manually enter the command in the terminal. But I am trying to debug a ROS application with nearly 10 different terminals opening up and I cannot be manually entering the command each time to restart the process.
Please let me know if you need any more information. Many thanks in advance.
Edit: both edits to frame the question properly.
Although not related to WSL, I dug a little deeper today as to why in my case the extension commands were not being executed or were being chopped.
I'm an iTerm2 user. iTerm2 has something called Shell Integrations, which allow iTerm to behave differently under certain circumstances, for example, adding markers to each prompt or coloring output with certain text (e.g. WARNING or ERROR)
From time to time, I also use the VSCode Integrated Terminal, which recently added support for reporting whether the previous command errored out with an indicator on the gutter of the Integrated Terminal panel using the exit code.
iTerm can do something similar but the shell integrations mess up completely the VSCode functionality and therefore I changed my .bashrc file to detect if the terminal emulator was iTerm2 or not (which can be done with the it2check utility of iTerm2) so that it only sourced the shell integrations if I was using iTerm2.
The problem is that it2check "eats" some STDIN bytes using dd, specifically, until it finds an n so that it can obtain the name of the emulator. This of course chops the commands on the STDIN until the first n and makes VSCode Extension Terminal commands unusable
The workaround I came up with is to use the value of "$TERM_PROGRAM" as means to distinguish between the different programs. The only caveat is that the value won't be passed if you're inside of a tmux session or similar, but I can live with that.
In your case, I'd check for any process that is either not passing the STDIN to the WSL process or any dot files or shell profile scripts eating up the STDIN they receive.
I suspect that the real problem is that the local process doesn't relay the STDIN contents to the WSL and as a workaround you may try to create a VSCode Integrated Terminal profile that uses SSH to connect to the WSL host so that the STDIN is preserved
In vs code terminal I'm getting first letter of command twice. it's not causing any problem but it's kind of annoys me to watch the wrong command. I'm not writing any letter twice, the first letter of all commands gets repeated automatically.
as you can see there are 2 commands first one ppython first p automatically got repeated even though i wrote python it makes it ppython. and the first p that got repeated won't delete from there even if i spam backspace so many time . the I tried to clear the command till first p and as I'm not able to remove first p from terminal I just wrote ython in front of it. it looks proper now python. but I got a error response as ython is not recognized command. this same happens with other commands too like cd converts to ccd.
Edit : I Re-installed vs code then but that didn't resolved my problem, when I installed it again all my extensions were there already installed then I deleted vs code again then went to the vs code's location there was a folder name .vscode I deleted that then installed vs code again now all the extensions were deleted from vs code but I'm still having the main problem . that doesn't resolved it. and I'm not getting that error while using other terminals like git bash and I'm getting this error only when I open python file's folder not when I open a react app folder or normal js or other language.
I also tried reseting the default setting from setting.json file as one of the answers suggested but that doesn't worked.
It's hard to answer this without knowing your configuration. What plugins have you installed? Try disabling those related to the terminal emulator one by one to see if they're causing any issues.
In doing this, you would naturally restart the terminal emulator as well. If the problem persists, check if you get this erroneous doubling on a terminal emulator outside of VS Code (Terminal or PowerShell).
If nothing works, try reinstalling the interpreter and also VS Code. Especially the latter, if this seems to affect only the terminal emulator within VS Code.
It's really hard to answer your question without knowing your vs code configuration setting.
The easiest way is you can reset your vs code to default
The Steps
Go to View > Command Palette or press Cmd + Shift + P (macOS) or Ctrl + Shift + P (Windows).
Search for open settings json and select Preferences: Open Settings (JSON) which show ups from the result list.
If you’ve been working with VS Code for a while and installed a lot of things and made a lot of changes, you’ll find there’s a lot of stuff in this file:
Delete everything inside the root braces and save the file
Relaunch your VS Code.
(This step is optional) In case you want to not only reset VS Code but also remove all installed extensions:
Delete the ~/.vscode/extensions folder if you’re on a Mac.
Delete the %USERPROFILE%.vscode\extensions folder if you’re using Windows.
I noticed that the command history is saved when using Visual Studio Code. Using the arrow up and down keys, I can toggle through previously issued commands in the integrated terminal.
Where is the terminal history saved on the drive? Is it possible to open a file in notepad (or notepad++) and investigate the complete history, delete it?
I'm using Windows 10, and I have concluded that deleting the folders C:\Users\john\.vscode and C:\Users\john\AppData\Roaming\Code will not delete the terminal history for a particular project.
VSCode terminal use external shell. For linux the default shell is bash, I am not so sure about window, but I guess the default shell for window is powershell.
If your terminal shell is indeed powershell, this should help you locate the log file.
On Linux & MacOS, type the following command to display the path of the history file:
echo $HISTFILE
The history file may be different between VSCode and your regular terminal.
So you should type this command within the integrated terminal.
On Ubuntu you can see your history using this command:
vi ~/.bash_history