I have a c# application that used IIS 10, that has been working for many years with using the session id to track the users selections across the site.
I did an update this week and I messed something up and I can't seem to pinpoint where the change was made.
I added a textbox on the same page on both test and production.
<asp:TextBox runat="server" ID="txtSession" ></asp:TextBox>
protected void Page_Load(object sender, EventArgs e)
{
txtSession.Text = Session.SessionID.ToString();
}
On test when I refresh the session id stays the same, but when I'm on production the session id changes when I refresh or go to a different page. I'm reviewed my web.config on both sides and can't see where this is an issue. This is the only session row in web.config on both side
<sessionState mode="InProc" timeout="120"/>
Within the global.asax.ca has the following
protected void Session_Start(object sender, EventArgs e)
{
Session.Timeout = 60;
Session["User"] = "";
Session["UserLevel"] = 0;
Session["EmptyFields"] = -1;
//Session["SelectedID"] = "";
}
So it is Any help would be greatly appreciated. I've been going over this for almost 2 days and I can't seem to find the issue. Part of my updated including updating to oracle managed data access dlls. This also exists on test and it working fine.
I figured out the issue was the following files were deleted from the bin directory.
App_global.asax.compiled
App_global.asax.dll
As soon as I copied them back everything started working.
Related
I've been maintaining a Windows CE app for some time now (over a year) and have produced new versions of it from time to time, copying them to the handheld device[s] and running the new versions there.
Today, though, I created a new Windows CE app for the first time. It is a very simple utility.
To create it in VS 2008, I selected a C# "Smart Device Project" template, added a few controls and a bit of code, and built it.
Here are some of the options I selected:
I copied the .exe produced via building the project to the handheld device's Program Files folder:
...but it won't run. Is it in the wrong location? Does it need some ancillary files copied over? Is there some other sort of setup I need to do to get it to run? Or what?
UPDATE
Since there's not much of it, I'm pasting ALL the code below in case somebody thinks my code could be the problem:
using System;
using System.Linq;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.IO.Ports;
namespace PrinterCommanderCE
{
public partial class PrinterCommanderForm : Form
{
public PrinterCommanderForm()
{
InitializeComponent();
}
private void btnSendCommands_Click(object sender, EventArgs e)
{
SendPrinterCommands();
}
private void SendPrinterCommands()
{
bool successfulSend = false;
const string quote = "\"";
string keepPrinterOn = string.Format("! U1 setvar {0}power.dtr_power_off{0} {0}off{0}", quote);
string shutPrinterOff = string.Format("! U1 setvar {0}power.dtr_power_off{0} {0}on{0}", quote);
string advanceToBlackBar = string.Format("! U1 setvar {0}media.sense_mode{0} {0}bar{0}", quote);
string advanceToGap = string.Format("! U1 setvar {0}media.sense_mode{0} {0}gap{0}", quote);
if (radbtnBar.Checked)
{
successfulSend = SendCommandToPrinter(advanceToBlackBar);
}
else if (radbtnGap.Checked)
{
successfulSend = SendCommandToPrinter(advanceToGap);
}
if (successfulSend)
{
MessageBox.Show("label type command successfully sent");
}
else
{
MessageBox.Show("label type command NOT successfully sent");
}
if (ckbxPreventShutoff.Checked)
{
successfulSend = SendCommandToPrinter(keepPrinterOn);
}
else
{
successfulSend = SendCommandToPrinter(shutPrinterOff);
}
if (successfulSend)
{
MessageBox.Show("print shutoff command successfully sent");
}
else
{
MessageBox.Show("print shutoff command NOT successfully sent");
}
}
private bool SendCommandToPrinter(string cmd)
{
bool success = false;
try
{
SerialPort serialPort = new SerialPort();
serialPort.BaudRate = 19200;
serialPort.Handshake = Handshake.XOnXOff;
serialPort.Open();
serialPort.Write(cmd);
serialPort.Close();
success = true;
}
catch
{
success = false;
}
return success;
}
}
}
UPDATE 2
Based on this, I added a global exception handler to the app so that Program.cs is now:
namespace PrinterCommanderCE
{
static class Program
{
[MTAThread]
static void Main()
{
AppDomain currentDomain = AppDomain.CurrentDomain;
currentDomain.UnhandledException += new UnhandledExceptionEventHandler(GlobalExceptionHandler);
Application.Run(new PrinterCommanderForm());
}
static void GlobalExceptionHandler(object sender, UnhandledExceptionEventArgs args)
{
Exception e = (Exception)args.ExceptionObject;
MessageBox.Show(string.Format("GlobalExceptionHandler caught : {0}", e.Message));
}
}
}
Yet running the new build shows nothing - it just "flashes" momentarily with about as much verbosity as Lee Harvey Oswald after Jack Ruby's friendly visit.
UPDATE 3
Could the problem be related to this, and if so, how to solve it?
The circumstance that both my updated version of an existing app AND this brand new and simple app refuse to run indicate there is something fundamentally flawed somewhere in the coding, building, or deployment process.
UPDATE 4
As this is a minimal utility, the reason it (and my legacy, much more involved) app are not working may have something to do with the project properties, how it's being built, a needed file not being copied over, or...???
NOTE: The desktop icon is "generic" (looks like a blank white form); this perhaps indicates a problem, but is it indicative of something awry or is it a minor (aesthetics-only) problem?
UPDATE 5
In Project > Properties..., Platform is set to "Active (Any CPU)" and Platform target the same ("Active (Any CPU)")
I have read that this is wrong, that it should be "x86", but there is no "x86" option available - Any CPU is the only one...?!?
UPDATE 6
In Project > Properties... > Devices, the "Deploy the latest version of the .NET Compact Framework (including Service Packs)" is checked. Is this as it should be?
UPDATE 7
Okay, here's the really strange part of all this:
I have two CF/CE apps that I need to run on these Motorola/Symbol 3090 and 3190 handheld devices.
One is this simple utility discussed above. I find that it actually does run on one of the devices (the 3190, FWIW). So it runs on one device, but not on the other.
HOWEVER, the other (legacy) .exe is the opposite - it runs on the 3090 (where the utility will not even start up), but not on the 3190.
So the utility's needs are met by the 3190, and the legacy util's needs are met by the 3090. However, the NEW version of the legacy app does not run on either device!
I am baffled; I feel as Casey Stengel must have when speaking once of his three catchers: "I got one that can throw but can't catch, one that can catch but can't throw, and one who can hit but can't do either."
UPDATE 8
The 3190 has a newer version of the CF installed; it seems that both the new and the old apps should run on the new device with the newer CE, but they don't - only the one built against/for the new framework does...
UPDATE 9
Here is what the 3090 looks like:
UPDATE 10
So I have two exes, one that runs on the devices (both of them now), and the other that will run on neither of the devices. The two exesw seem almost identical. I compared them with three tools: Red Gates' .NET Reflector; JetBrains' dotPeek, and Dependency Walker.
Here is what I found:
Dependency Walker
Both seem to have the same errors about missing dependencies (I didn't have them in the same folder with their dependent assemblies is probably the problem there)
.NET Reflector
The nonworking file has this entry that the working file does not:
[assembly: Debuggable(0x107)]
Is this the problem and, if so, how can I change it?
JetBrains dotPeek
The References in the working copy of the exe are all version 1.0.50000.0
The non-working exe has an identical list of References, and the same version number.
There is this difference, though:
For the working .exe, dotPeek says, "1.4.0.15, msil, Pocket PC v3.5"
For the non-working .exe, dotPeek says, "1.4.0.15, msil, .Net Framework v4.5"
Is this the problem and, if so, how can I change the non-working .exe to match the working one?
This last is disconcerting, primarily because I see no place in the non-working (newer) version of the project where a "4.5" string exists. Where could dotPeek be getting that information?
UPDATE 11
I do know now that the problem is somewhere between these two MessageBox.Show()s, because the first one I see, but not the second:
public static int Main(string [] args)
{
try
{
// A home-brewed exception handler (named ExceptionHandler()) is already defined, but I'm adding a global one
// for UNHANDLED exceptions (ExceptionHandler() is explicitly called throughout the code in catch blocks).
MessageBox.Show("made it into Main method"); // TODO: Remove after testing <= this one is seen
AppDomain currentDomain = AppDomain.CurrentDomain;
currentDomain.UnhandledException += new UnhandledExceptionEventHandler(GlobalExceptionHandler);
string name = Assembly.GetExecutingAssembly().GetName().Name;
IntPtr mutexHandle = CreateMutex(IntPtr.Zero, true, name);
long error = GetLastError();
if (error == ERROR_ALREADY_EXISTS)
{
ReleaseMutex(mutexHandle);
IntPtr hWnd = FindWindow("#NETCF_AGL_BASE_",null);
if ((int) hWnd > 0)
{
SetForegroundWindow(hWnd);
}
return 0;
}
ReleaseMutex(mutexHandle);
DeviceInfo devIn = DeviceInfo.GetInstance();
Wifi.DisableWifi();
// Instantiate a new instance of Form1.
frmCentral f1 = new frmCentral();
f1.Height = devIn.GetScreenHeight();
f1.Text = DPRU.GetFormTitle("DPRU HHS", "", "");
MessageBox.Show("made it before Application.Run() in Main method"); // TODO: Remove after testing <= this one is NOT seen
Application.Run(f1);
devIn.Close();
Application.Exit();
return 0;
}
catch(Exception ex)
{
DPRU.ExceptionHandler(ex, "Main");
return 0;
}
} // Main() method
UPDATE 12
More specifically, I've got infinite looping going on somehow; By mashing the "Ent" pill on the handheld device (that's what the button looks like - a "lozenge") - it sounds like gerbils tap-dancing (as debugging MessageBox.Show()s in two methods pop up and are dismissed over and over ad infinitum ad (literally) nauseum).
If an application does not start it is mostly missing something. As you compiled for WindowsCE and CF3.5, the Compact Framework 3.5 runimes have to be installed on the WindowsCE device.
Normally Compact Framework is part of Windows CE images, at least version 1.0, but who knows for your test device? If at least one CF is installed, an app requiring a newer CF version will show that on start by a message stating about the missed version. So either no CF is on your device, or something is goind real wrong.
You can run \Windows\cgacutil.exe to check the CF version installed on the device. The tool will show the version of installed CF.
You can debug using a TCP/IP connection or ActiveSync connection. See remote debuggung elsewhere in stackoverflow, I wrote a long aanswer about remote debug via TCP/IP. Or does your device neither have USB and WLAN or ENET?
Update: Here is the answer for remote debug via tcp/ip: VS2008 remotely connect to Win Mobile 6.1 Device This will also enable the remote deployment "In Project > Properties... > Devices, the "Deploy the latest version of the .NET Compact Framework (including Service Packs)" is checked. Is this as it should be?"
Are the earlier apps you wrote also written .NET? Compact framework does not care about the processor architecture, only the CF runtimes have to match the processor. So you do not need an x86 target as if you write a native C/C++ SmartDevice project.
To your comments:
a) CF1.0 is installed on the device.
b) the exe built on the colleagues computer seems to be built for CF1 and therefor runs OK.
c) your exe is built for CF 3.5 and does not run as there is no CF3.5 runtime on the device.
d) most CF exe files are very small as long as they do not include large resources or ...
Conclusion so far: Install the CF3.5 runtime onto the device: http://msdn.microsoft.com/en-us/library/bb788171%28v=vs.90%29.aspx.
To run the legacy app on both devices, the referenced Motorola or other 3rd party runtimes must also be installed. I stringly recommand to setup your environment so you can use ActiveSync/WMDC for development, deployment and debugging of the device. If you are unable look for some more experienced colleague.
Can you try to run it inside the debugger and check where it fails?
Can you place a breakpoint right at the beginning of Program.main and check if it's reached?
Debug output may also give you some interesting hints.
I have a Crystal report that displays client data according to a period or by specific client IDs. The report is composed by 2 subreports that, if run from Crystal Report (CR), work perfectly according to the parameter accepted in the proper CR dialog.
Running from web page the first report page is displayed properly in a ReportViewer object. Checking with SQL Profiler, the queries are executed properly with the right parameters, retunrning 1 record for the first subreport and 2 records for the second.
However clicking on the report to switch to the next page a message appears: "Object reference not set to an instance of an object.".
Here the code for the ReportViewer:
_crystalReportViewer.DisplayGroupTree = false;
_crystalReportViewer.HasCrystalLogo = false;
_crystalReportViewer.HasDrillUpButton = false;
_crystalReportViewer.HasToggleGroupTreeButton = false;
_crystalReportViewer.HasViewList = false;
_crystalReportViewer.ReportSource = _myReportDocument;
[...]
protected void Page_UnLoad (object sender, EventArgs e)
{
if (_crystalReportViewer != null)
_crystalReportViewer.Dispose();
_crystalReportViewer = null;
}
Debugging the code everything seems fine. I guess the issue might be with the ReportViewer or CR itself, but I cannot find a way to solve it. Could you give me any advise?
Thanks in advance!
I got that the problem was with the Page_UnLoad event: it was invoked each time the next/previous page button in Cristal Report was clicked, disposing the Viewer and causing the Object Reference exception.
I added a condition to check if a PostBack happens:
protected void Page_UnLoad (object sender, EventArgs e)
{
if (!IsPostBack)
{
if (_crystalReportViewer != null)
_crystalReportViewer.Dispose();
_crystalReportViewer = null;
if (_myReportDocument != null)
{
_myReportDocument.Close();
_myReportDocument.Dispose();
}
_myReportDocument = null;
GC.Collect();
}
}
Unfortunately a small problem still persist: on the TEST machine, everything works fine but once deployed on DEV machine (they are 2 different servers with apparently same settings), it is possible to view just the first 2 records of the report, then by clicking on "Next" button of the CR Viewer nothing happens. All other features like "Go TO" and "Print" from CR work fine.
It is quite strange since the database settings are correct, the report and code are the same...any idea?
I recently tried to follow the Large scale application development and MVP tutorial. The tutorial was great but I am having a hard time with a few things.
If you try and add a contact to the list, the contact is created. If you try and add another contact, you are taken to the edit screen of the last contact you created. No more contacts can be added once you add your first contact. What needs to be changed so you can add more than one contact.
Changes I have made to try and get it to work:
Create a new editContactsView each time the add button is pressed. This brings up a blank edit screen, but the new contact still overwrites the previous addition.
Changed contacts.size() to contacts.size()+1 when determining the ID of the new contact.
Actually, there are a couple of problems (from what I can see):
like Lumpy already mentioned, the new Contact created via EditContactPresenter doesn't get an id assigned (it's null). This is because EditContactPresenter uses the default Contact() constructor which doesn't set the id. There are many possible solutions to this: add setting the id in the default constructor (so that you don't have to keep track of the ids somewhere else in the app), delegate that function to your server (for example, make your DB generate the next available id and send it back) or just add a contact.setId(whatever); in the appropriate place in EditContactsPresenter
AppController.java:134 - this example reuses the view (which is a good idea), but it doesn't clear it if you use it for creating a new Contact. Solution: either disable view reusing (just make a new EditContactsView every time) or add a clear() or sth similar to your Views and make the Presenters call it when they want to create a new entry, instead of editing an exisiting one (in which case, the values from the current entry overwrite the old values, so it's ok).
It's weird that this sample was left with such bugs - although I understand that it's main purpose was to show how MVP and GWT go together, but still :/
When a new contact is added it's id is never set. Because the id field is a string it is stored as "". That is how the first contact is added. Now every time you create a new contact you overwrite the contact with key "". To fix this you need to set the value of the id. I did this by changing the doSave method in EditContactsPresenter.
private void doSave() {
contact.setFirstName(display.getFirstName().getValue());
contact.setLastName(display.getLastName().getValue());
contact.setEmailAddress(display.getEmailAddress().getValue());
if(History.getToken.equals("add")
rpcService.updateContact(contact, new AsyncCallback<Contact>() {
public void onSuccess(Contact result) {
eventBus.fireEvent(new ContactUpdatedEvent(result));
}
public void onFailure(Throwable caught) {
Window.alert("Error updating contact");
}
});
else
rpcService.updateContact(contact, new AsyncCallback<Contact>() {
public void onSuccess(Contact result) {
eventBus.fireEvent(new ContactUpdatedEvent(result));
}
public void onFailure(Throwable caught) {
Window.alert("Error updating contact");
}
});
}
We're trying to play around with RIA Services. I can't seem to figure out how to delete a record. Here's the code I'm trying to use.
SomeDomainContext _SomeDomainContext = (SomeDomainContext)(productDataSource.DomainContext);
Product luckyProduct = (Product)(TheDataGrid.SelectedItem);
_SomeDomainContext.Products.Remove(luckyProduct);
productDataSource.SubmitChanges();
The removing the object from the Entity part works fine, but it doesn't seem to do anything to the DB. Am I using the objects like I'm supposed to, or is there a different way of saving things?
The error system is a little finicky. Try this o get the error if there is one and that will give you an idea. My problem was dependencies to other tables needing deletion first before the object could be. Ex: Tasks deleted before deleting the Ticket.
System.Windows.Ria.Data.SubmitOperation op = productDataSource.SubmitChanges();
op.Completed += new EventHandler(op_Completed);
void TicketsLoaded_Completed(object sender, EventArgs e) {
System.Windows.Ria.Data.SubmitOperation op = (System.Windows.Ria.Data.SubmitOperation)sender;
if (op.Error != null) {
ErrorWindow view = new ErrorWindow(op.Error);
view.Show();
}
}
In the code snippet above, I'd suggest using the callback parameter rather than an event handler.
productsDataSource.SubmitChanges(delegate(SubmitOperation operation) {
if (operation.HasError) {
MessageBox.Show(operation.Error.Message);
}
}, null);
The callback model is designed for the caller of Load/SubmitChanges, while the event is designed for other code that gets a reference to a LoadOperation/SubmitOperation.
Hope that helps...
I am trying to register to a "Device added/ Device removed" event using WMI. When I say device - I mean something in the lines of a Disk-On-Key or any other device that has files on it which I can access...
I am registering to the event, and the event is raised, but the EventType propery is different from the one I am expecting to see.
The documentation (MSDN) states : 1- config change, 2- Device added, 3-Device removed 4- Docking. For some reason I always get a value of 1.
Any ideas ?
Here's sample code :
public class WMIReceiveEvent
{
public WMIReceiveEvent()
{
try
{
WqlEventQuery query = new WqlEventQuery(
"SELECT * FROM Win32_DeviceChangeEvent");
ManagementEventWatcher watcher = new ManagementEventWatcher(query);
Console.WriteLine("Waiting for an event...");
watcher.EventArrived +=
new EventArrivedEventHandler(
HandleEvent);
// Start listening for events
watcher.Start();
// Do something while waiting for events
System.Threading.Thread.Sleep(10000);
// Stop listening for events
watcher.Stop();
return;
}
catch(ManagementException err)
{
MessageBox.Show("An error occurred while trying to receive an event: " + err.Message);
}
}
private void HandleEvent(object sender,
EventArrivedEventArgs e)
{
Console.WriteLine(e.NewEvent.GetPropertyValue["EventType"]);
}
public static void Main()
{
WMIReceiveEvent receiveEvent = new WMIReceiveEvent();
return;
}
}
Well, I couldn't find the code. Tried on my old RAC account, nothing. Nothing in my old backups. Go figure. But I tried to work out how I did it, and I think this is the correct sequence (I based a lot of it on this article):
Get all drive letters and cache
them.
Wait for the WM_DEVICECHANGE
message, and start a timer with a
timeout of 1 second (this is done to
avoid a lot of spurious
WM_DEVICECHANGE messages that start
as start as soon as you insert the
USB key/other device and only end
when the drive is "settled").
Compare the drive letters with the
old cache and detect the new ones.
Get device information for those.
I know there are other methods, but that proved to be the only one that would work consistently in different versions of windows, and we needed that as my client used the ActiveX control on a webpage that uploaded images from any kind of device you inserted (I think they produced some kind of printing kiosk).
Oh! Yup, I've been through that, but using the raw Windows API calls some time ago, while developing an ActiveX control that detected the insertion of any kind of media. I'll try to unearth the code from my backups and see if I can tell you how I solved it. I'll subscribe to the RSS just in case somebody gets there first.
Well,
u can try win32_logical disk class and bind it to the __Instancecreationevent.
You can easily get the required info
I tried this on my system and I eventually get the right code. It just takes a while. I get a dozen or so events, and one of them is the device connect code.