I am new to Flutter hooks and I have requirements that I have to use HookWidget instead of StatefulWidget. As I know, useState can only be declared within the build function.
Widget build(BuildContext context) {
final selectedBook = useState("");
return Container(
child: _buildBookListContainer(context)
)
}
Widget _buildBookListContainer(BuildContext context) {
//I will want to update the state value or read the state value in the child function
//how do I do that?
//Example: selectedBook.value = "xxx";
}
I tried passing down the state value as function arguments but it will not work. May I know that is it all HookWidget class will just write all components inside the build function without refractoring?
Presuming you're using Riverpod, watch my relatively short "building the counter app from scratch with my riverpod starter kit" at https://www.youtube.com/watch?v=0lPzFS5CAPs. It shows how to create a StateProvider, and then either reference it (with listen) or update it (no listen) for precise control of widget rebuilds.
Related
is there a difference in these 3 codes:
First: when i call my function inside onInit().
#override
void onInit() {
super.onInit();
fetchProductsFromAPI();
}
Second: when i call my function inside of build method, in stateless widget.
class MyApp extends StatelessWidget {
#override
Widget build(BuildContext context) {
fetchProductsFromAPI();
return GetMaterialApp(
home: ShoppingPage(),
);
}
}
Third: when i call my function outside of build method, in stateless widget.
class MyApp extends StatelessWidget {
fetchProductsFromAPI();
#override
Widget build(BuildContext context) {
return GetMaterialApp(
home: ShoppingPage(),
);
}
}
Yes, there is a difference. You can read about flutter widget life cycle to have more details:
Life cycle in flutter
https://medium.flutterdevs.com/app-lifecycle-in-flutter-c248d894b830
In summary
When you call your method outside of build method (your 3rd example).
This is what is usually recommended when you can do it.
See is there any difference between assigning value to the variable inside of initState or not in Flutter StatefulWidget?
This will be run only once, when the class is created.
Inside the initState (your 1st example)
At this moment, your widget is being created. Some getters are already available, like the context. This method is called only once.
Inside the build method (your 2nd example)
This is usually the worst approach. Your method will be called for each and every build (you can consider 1 build = 1 frame) which can lead to poor performances. It is recommended to move those calls out of the build method when possible (and if it makes sense)
See How to deal with unwanted widget build?
First:
Put it on initState then the function fetchProductsFromAPI will only call first time your widget create
Second:
I highly recommend you do not use this approach, because build method will be trigger many time when widget need to rebuild, if you put it there, your app will be fetchProductsFromAPI at a lot of unexpected times.
Example when you need to call setState() for some changes, you don't want to call fetch API
Third:
This way will cause compile error, I don't think you can put it there like your code above
I am trying to create tests for my Flutter application. Simple example:
class MyWidget extends StatelessWidget {
#override
build(BuildContext context) {
return MySecondWidget();
}
}
I would like to verify that MyWidget is actually calling MySecondWidget without building MySecondWidget.
void main() {
testWidgets('It should call MySecondWidget', (WidgetTester tester) async {
await tester.pumpWidget(MyWidget());
expect(find.byType(MySecondWidget), findsOneWidget);
}
}
In my case this will not work because MySecondWidget needs some specific and complex setup (like an API key, a value in a Provider...). What I would like is to "mock" MySecondWidget to be an empty Container (for example) so it doesn't raise any error during the test.
How can I do something like that ?
There is nothing done out of the box to mock a widget. I'm going to write some examples/ideas on how to "mock"/replace a widget during a test (for example with a SizedBox.shrink().
But first, let me explain why I think this is not a good idea.
In Flutter you are building a widget tree. A specific widget has a parent and usually has one or several children.
Flutter chose a single pass layout algorithm for performance reasons (see this):
Flutter performs one layout per frame, and the layout algorithm works in a single pass. Constraints are passed down the tree by parent objects calling the layout method on each of their children. The children recursively perform their own layout and then return geometry up the tree by returning from their layout method. Importantly, once a render object has returned from its layout method, that render object will not be visited again until the layout for the next frame. This approach combines what might otherwise be separate measure and layout passes into a single pass and, as a result, each render object is visited at most twice during layout: once on the way down the tree, and once on the way up the tree.
From this, we need to understand that a parent needs its children to build to get their sizes and then render itself properly. If you remove its children, it might behave completely differently.
It is better to mock the services if possible. For example, if your child makes an HTTP request, you can mock the HTTP client:
HttpOverrides.runZoned(() {
// Operations will use MyHttpClient instead of the real HttpClient
// implementation whenever HttpClient is used.
}, createHttpClient: (SecurityContext? c) => MyHttpClient(c));
If the child needs a specific provider you can provide a dummy one:
testWidgets('My test', (tester) async {
tester.pumpWidget(
Provider<MyProvider>(
create: (_) => MyDummyProvider(),
child: MyWidget(),
),
);
});
If you still want to change a widget with another one during your tests, here are some ideas:
1. Use Platform.environment.containsKey('FLUTTER_TEST')
You can either import Platform from dart:io (not supported on web) or universal_io (supported on web).
and your build method could be:
#override
Widget build(BuildContext context) {
final isTest = Platform.environment.containsKey('FLUTTER_TEST');
if (isTest) return const SizedBox.shrink();
return // Your real implementation.
}
2. Use the annotation #visibleForTesting
You can annotate a parameter (ex: mockChild) that is only visible/usable in a test file:
class MyWidget extends StatelessWidget {
const MyWidget({
#visibleForTesting this.mockChild,
});
final Widget? child;
#override
Widget build(BuildContext context) {
return mockChild ?? // Your real widget implementation here.
}
}
And in your test:
tester.pumpWidget(
MyWidget(
mockChild: MyMockChild(),
),
);
You can mock MySecondWidget (eg using Mockito) but you do need to change your real code to create a MockMySecondWidget when in test mode, so it's not pretty. Flutter does not support object instantiation based on a Type (except through dart:mirrors but that is not compatible with Flutter), so you cannot 'inject' the type as a dependency. To determine if you are in test mode use Platform.environment.containsKey('FLUTTER_TEST') - best to determine this once upon startup and set the result as a global final variable, which will make any conditional statements quick.
One way to do it, is to wrap the child widget into a function, and pass the function to parent widget's constructor:
class MyWidget extends StatelessWidget {
final Widget Function() buildMySecondWidgetFn;
const MyWidget({
Key? key,
this.buildMySecondWidgetFn = _buildMySecondWidget
}): super(key: key);
#override
build(BuildContext context) {
return buildMySecondWidgetFn();
}
}
Widget _buildMySecondWidget() => MySecondWidget();
Then you can make up your mock widget, pass it thru buildMySecondWidgetFn in test.
I already known that build context can be used in StatefulWidget any where but only in build function when using Stateless Widget. There is so many content in widget need to reference the build context like Theme, showDialog,Navigator,Provider...
For Example, I have some code below in StatelessWidget:
#override
Widget build(BuildContext context){
...
_getFirstWidget();
...
}
...
Widget _getFirstWidget(){
return _getSecondWidget();
}
Widget _getSecondWidget(){
return _getThirdWidget();
}
Widget _getThirdWidget(){
// use build context here
}
...
If I want to use the build context at the end Widget, I think of 3 ways:
Pass the build context layer by layer
Convert to StatefulWidget
Convert the last widget to a Stateless Widget itself (and use the build context in build)
Why flutter make this restriction in StatelessWidget?
I'm not really sure but I think you want the use the BuildContext from the build method in the function '_getThirdWidget()'. You could just pass it as a parameter like below:
Widget _getThirdWidget(BuildContext context) {
// Use the context here
}
// Call the function like this in the parent widget
#override
Widget build(BuildContext context) {
return _getThirdWidget(context);
}
Let me know if this answers your question!
If you use the method of adding an argument to use context,
Almost every function needs a context argument
this is stupid behavior
StatelessWidget is inconvenient
I try to use StatelessWidget, but end up using Statefulwidget
I've got a widget that displays a classes' list, but that list changes (the content changes) over time by other elements and interactions of the program. How can the DisplayListWidget detect this? Do the elements that change this list have to communicate with the displaylistwidget?
EDIT: I'm familiair with stateful widgets and setState () {}. It's just that the data changes in the background (e.g. by a timer) so there's no reference from bussiness logic classes to widgets to even call setState.
If you would like to notify (rebuild) widgets when data changes, check out provider package.
There are some other options:
BLoC (Business Logic Component) design pattern.
mobx
Redux
Good luck
Try wrapping the display widget in a state widget, and then whenever you update the list, call setState(() { //update list here })
ex.
// this is the widget that you'd nest directly into the rest of your tree
class FooList extends StatefulWidget {
FooListState createState() => FooListState();
}
// this is the state you will want to call setState on
class FooListState extends State<FooList> {
Widget build(BuildContext context) {
return DisplayListWidget [...]
}
}
I would recommend following this flutter tutorial where they dynamically update a list
And to learn more about StatefulWidgets and States check this out: https://api.flutter.dev/flutter/widgets/StatefulWidget-class.html
In developing some of the screens for my flutter app, I regularly need to dynamically render widgets based on the state of the screen. For circumstances where it makes sense to create a separate widget and include it, I do that.
However, there are many use cases where what I need to render is not fit for a widget, and leverages existing state from the page. Therefore I use builder methods to render the appropriate widgets to the page. As anyone who uses Flutter knows, that can lead to lengthy code where you need to scroll up/down a lot to get to what you need to work on.
For better maintainability, I would love to move those builder methods into separate files, and then just include them. This would make it much easier to work on specific code widgets rendered and make the screen widget much cleaner.
But I haven't found a proper way to extract that dynamic widget code, which makes use of state, calls to update state, etc. I'm looking for a type of "include" file that would insert code into the main screen and render as if it's part of the core code.
Is this possible? How to achieve?
With the introduction of extension members, I came across this really neat way of achieving exactly what your described!
Say you have a State class defined like this:
class MyWidgetState extends State<MyWidget> {
int cakes;
#override
void initState() {
super.initState();
cakes = 0;
}
#override
Widget build(BuildContext context) {
return Builder(
builder: (context) => Text('$cakes'),
);
}
}
As you can see, there is a local variable cakes and a builder function. The very neat way to extract this builder now is the following:
extension CakesBuilderExtension on MyWidgetState {
Widget cakesBuilder(BuildContext context) {
return Text('$cakes');
}
}
Now, the cakes member can be accessed from the extension even if the extension is placed in another file.
Now, you would update your State class like this (the builder changed):
class MyWidgetState extends State<MyWidget> {
int cakes;
#override
void initState() {
super.initState();
cakes = 0;
}
#override
Widget build(BuildContext context) {
return Builder(
builder: cakesBuilder,
);
}
}
The cakesBuilder can be referenced from MyWidgetState, even though it is only declared in the CakesBuilderExtension!
Note
The extension feature requires Dart 2.6. This is not yet available in the stable channel, but should be around the end of 2019 I guess. Thus, you need to use the dev or master channels: flutter channel dev or flutter channel master and update the environment constraint in your pubspec.yaml file:
environment:
sdk: '>=2.6.0-dev.8.2 <3.0.0'