I would like to prevent flyspell from changing the foreground color of words, and just add a red underline.
I've tried the suggestions here, but it doesn't have any effect: How to overlay a face in Emacs that ONLY modifies the underline. Perhaps I'm missunderstanding the answer, but setting inherit: undefined in the customize interface does nothing.
Guessing I should customize flyspell-duplicate and flyspell-incorrect, but how?
As suggested by #chakravarthy-raghunandan the issue was with a local customization.
Turns out the theme I'm using set this, so my customizations were overwritten.
Putting this in my init.el fixed the issue:
(custom-theme-set-faces
'cyberpunk
'(flyspell-duplicate ((t (:weight bold :underline (:color "#ff0000" :style wave)))))
'(flyspell-incorrect ((t (:weight bold :underline (:color "#ff0000" :style wave))))))
I've recently moved to emacs and have a pretty simple question: when I'm on an specific line, linum changes it's foreground and background color. How can I disable this? What I'm trying to disable is the yellow foreground and grey background. I just get slightly distracted with it.
You seem to have linum-relative installed, it uses the face linum-relative-current-face to highlight current line, you can customize it so that it is less distractive. Here is an example of disabling the highlight completely
(set-face-attribute 'linum-relative-current-face nil :background nil :foreground nil :weight 'normal)
I have the issue visualized here:
The problem is the fringe is not colouring the background of my linum line numbers. I'm using Emacs 24.3.1 with Solarized color theme.
I've looked over various threads, which claims to fix this issue. However, I couldn't get any of them to work.
Any clues?
Try M-x customize-face linum and then Show All Attributes. Change the value of the Background variable and it should change. Easier than having to edit the actual theme file.
(set-face-attribute 'fringe nil :background "white" :foreground "white")
Set the fringe color to whatever you want.
Using emacs-24.1, how can we extend/customize existing color-theme in emacs ? I tried doing this
(custom-theme-set-faces
'tango
'(ido-first-match ((t (:foreground "008800" :weight bold))))
It worked fine when I had tango loaded. But when I put this in .emacs.d/init.el file, it failed because tango was not loaded by then and emacs complained of undefined tango. This certainly is not going to help as I tend to change theme regularly using (load-theme ...). What I'm looking at is some kind of hook to run when the theme is loaded. Is it possible ?
Ofcourse, I can modify tango-theme.el file but that is not my goal. I want to extend the existing theme. I tried this in my init file
(load-theme 'tango-dark)
(custom-theme-set-faces
'tango-dark
'(ido-first-match ((t (:foreground "#00cdef" :weight bold))))
(deftheme tango)
(custom-theme-set-faces
'tango
'(ido-first-match ((t (:foreground "#008800" :weight bold))))
This worked fine for tango theme.. But tango-dark is show the same color as tango. So, how to customize existing themes even before loading them or set the custom faces at the time of loading the theme.
When I want to define a new theme, I modify a given theme, and afterwards I call (color-theme-print). This function will generate a function that helps to restore my modified color theme.Put/include the generated function in .emacs.
color-theme-print is used to generate new color themes.
The command you are looking for is eval-after-load.
Is it possible to present Markdown rendered in an Emacs buffer using Emacs' own buffer text formatting capabilities? Emacs in graphical environments has rich text presentation capabilities (font styles, colors, links and even images) so it should be quite possible. Are there any existing implementations?
Note that the idea is to have the rendered Markdown be native Emacs formatted text that can be navigated and operated on as any other text in Emacs. Therefore solutions that render to an image that is embedded in an Emacs buffer are not desirable here.
Also note that this is not about a mode for editing Markdown, but for presenting rendered Markdown in an Emacs buffer. It should preferably be a pure Emacs Lisp solution for portability.
Personally, I use the following workflow:
run on a C-c C-c m to run Markdown on the current buffer and preview the output in another buffer.
move to html-mode on this other buffer (M-x html-mode)
hide the html tags to display something close to the output (M-x sgml-tags-invisible)
Then every time you want to refresh the rendering, simply run again C-c C-c m on the markdown buffer.
Yet I confess until now for Markdown editing/previewing, nothing beats for me Textmate and its markdown preview panel. Actually, from a personal perspective, the only case where I prefer to run Textmate rather than Emacs is when I want to edit markdown files. Yet the path to have the same quality of preview on emacs is not so difficult and probably I should investigate it. As I see it, it's simply:
get the internal css used by Textmate for rendering the preview
use w3 or w3m to preview the markdown output using this css
I guess you can use the source code of latex-preview for inspiration or pretty-lambda(a much simpler piece of software).
Alternatively you can convert the markdown to html in a background process and preview the html.
Everything is possible in Emacs, but not everything is easily achieved :-)
I have this in my .emacs file:
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(markdown-header-delimiter-face ((t (:inherit font-lock-function-name-face :underline t :weight bold))) t)
'(markdown-header-face-1 ((t (:inherit markdown-header-face :height 1.5))) t)
'(markdown-header-face-2 ((t (:inherit markdown-header-face :height 1.3))) t)
'(markdown-header-face-3 ((t (:inherit markdown-header-face :underline t :height 1.2))) t)
'(markdown-header-face-4 ((t (:inherit markdown-header-face :underline t :height 1.1))) t)
'(markdown-header-face-5 ((t (:inherit markdown-header-face :underline t))) t)
'(markdown-header-face-6 ((t (:inherit markdown-header-face :underline t))) t))
(put 'set-goal-column 'disabled nil)
which enlarges all the headlines. Markdown-mode itself will italicize starred text and boldface double-starred text, so this will get you there. However, it will not make the control characters invisible.
If you want that, you should probably look into pretty-lambda for examples (as Bozhidar Batsov suggested)
Depending on the context where you'd like to see the rendered text, you might be able to get pretty close to what you need by just tweaking markdown-mode's font-lock rules.
Apart from pretty-lambda (which has already been suggested multiple times), you could look into org-mode and its syntax highliting rules. In particular, the org-hide-emphasis-markers variable does more or less what you want (see e.g. how org-do-emphasis-faces hide markup characters).
As I don't know about any emacs-based Markdown parser, I'd have to say that you have to code one from scratch. Maybe this SO question can throw some pointers at you.
If you opt to go through the Emacs-only road, then Semantic is an excellent API for that job (it offers you a lexer, parser-generator, and parser; it's been around for more than a decade, and it has documentation!). After having the language parser, you'll have to make some rendering functions for each token type. And this way you can customize everything.
Although this would be an enlightening trip, for sure, I'd still opt for using an existing Markdown->html converter on a separate background process and then use w3(m) for emacs preview (as Bozhidar suggested). It gets the job done and it's much simpler to do. No major performance issues, neither - you should run this tool rather scarcely, so you can easily spare some extra milliseconds).
A mixed solution would be to make the Markdown parser generate HTML directly, and preview it on a w3(m) buffer (it takes away the rendering weight from your shoulders, you only need to transliterate the markdown into html, and that seems pretty straight forward with Semantic).
If it is only about the rendering, go with Bozhidar's suggestion and do a Markdown to HTML conversion, then display the HTML in a W3 buffer. markdown-mode has code to call the external Markdown command with a few goodies.
But if you really want to do everything within Emacs Lisp, you'll have to write a Markdown parser first.
Me too, I've been looking for something like this for a very long time. The best I could find, though, is not am Emacs solution, it is an independent great piece of software called ReText.