I think I followed the tutorial from docker, minikube to create kube cluster, it was working at first time. But after somedays, I restart cluster and got this error when starting dashboard. Restart doesn't work.
Resetting and restarting your cluster
If you require a clean slate you can wipe out your local Minikube cluster and restart with issue an minikube delete and then minikube start commands:
➜ ~ minikube delete
🔥 Deleting "minikube" in docker ...
🔥 Deleting container "minikube" ...
🔥 Removing /home/thomas/.minikube/machines/minikube ...
💀 Removed all traces of the "minikube" cluster.
Synopsis
Deletes a local Kubernetes cluster. This command deletes the VM, and removes all associated files.
Related
I try to run minikube v0.22.1 and kubectl v1.7.5 on MacOS with Virtualbox.
$ minikube start
Starting local Kubernetes v1.7.5 cluster...
Starting VM...
Getting VM IP address...
Moving files into cluster...
Setting up certs...
Connecting to cluster...
Setting up kubeconfig...
Starting cluster components...
Kubectl is now configured to use the cluster.
$ minikube version
minikube version: v0.22.1
$ minikube status
minikube: Running
cluster: Running
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
However all kubectl commands fail with "connection refused - did you specify the right host or port?"
$ kubectl version
Client Version: version.Info{Major:"1", Minor:"7", GitVersion:"v1.7.5", GitCommit:"17d7182a7ccbb167074be7a87f0a68bd00d58d97", GitTreeState:"clean", BuildDate:"2017-08-31T19:32:26Z", GoVersion:"go1.9", Compiler:"gc", Platform:"darwin/amd64"}
The connection to the server 192.168.99.100:8443 was refused - did you specify the right host or port?
The solution proposed here (sudo ifconfig vboxnet0 up) did not help, the vboxnet0 interface is up.
Any ideas or suggestions are highly appreciated.
If you run
kubectl config get-contexts
Do you get the following?
CURRENT NAME CLUSTER AUTHINFO NAMESPACE
* minikube minikube minikube
If not that means your kubectl context is not correctly setup. To setup the context correctly run this
kubectl config use-context minikube
You may have it stopped or saved for any reason. sometimes, after you enable/disable addons you may need to restart it.
1) Restart minikube VM, stop it
$ minikube stop
2) Start it again, make sure you assign enough cpu/memory (the following is just an example of how to pass it, you need to adjust it based on available resources in your machine)
$ minikube start --memory=10000 --cpu 4
If this didn't work out, you can do the following that will help you to know more about the underlying cause of problem:
Check minikube status and make sure the status is Running
$ minikube status
Or, check minkube logs:
minikube logs
Finally, if you couldn't fix it, you may need to delete and start it from scratch
$ minikube delete && minikube start
Ref: https://github.com/kubernetes/minikube/issues/1498
I will just drop this in here in case anyone find this question.
As of right now I don't know the versions of the OP's setup. So I'm going to assume he has the latest version that was available when he posted, which was: 0.22.1
Description
I had a similar issue. The cluster was timing-out irregularly. One moment I got answers using kubectl cluster-info dump another I didn't. Then it worked again, and then it didn't. I found a github bug report with a solution.
Solution
Remove your VirtualBox VM.
Remove the ./minikube folder.
Remove the minikube executable.
Install version 0.19.0.
Verify that minikube is working with: kubectl
Versions
OS: Windows 10 (Home edition)
Minikube bugged version: 0.22.2
Minikube working version: 0.19.0
Kubectl (client): v1.7.0
Kubectl (server): v1.6.0
EDIT:
I kept having some issue with minikube after I posted this original answer. I found something that fixed the issue completely.
It's related to the dynamic memory setting in Hyper-V.
Solution
1. Turn off the hyper-v minikube VM.
2. Go to the VM's settings.
3. Turn off dynamic memory allocation.
4. Assign a decent amount of memory.
5. Save and turn the VM on again.
This should work with any minikube version. See this github issue for progress on an automatated solution
When debugging the minikube commands, e.g.
$ minikube dashboard --loglevel 0 --logtostderr
some proxy issues became visible and could be solved.
I ran into this situation this morning (another Monday!) on MacOS 11.3 with minikube v1.19.0.
I ran minikube status and got the following:
E0503 14:15:43.912005 7308 status.go:412] kubeconfig endpoint: got: 127.0.0.1:64041, want: 127.0.0.1:56537
minikube
type: Control Plane
host: Running
kubelet: Stopped
apiserver: Stopped
kubeconfig: Misconfigured
WARNING: Your kubectl is pointing to stale minikube-vm.
To fix the kubectl context, run `minikube update-context`
Seemed like good advice, so I did run minikube update-context and got this:
🎉 "minikube" context has been updated to point to 127.0.0.1:56537
💗 Current context is "minikube"
After which everything worked like it did on Friday.
After the Linux Security OS patching and reboot we are unable to start kubernetes service received below error.
Error message: The connection to the server 192.168.1.101:8443 received while starting the kubernetes service.
This issue happened due to systemd package got updated during the security patching.
So We did below action to bring up the application On each master nodes
1. Update the /usr/lib/systemd/system/kubelet.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
2. Update the /usr/lib/systemd/system/kube-proxy.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
3. Run the kube-restart.sh on the master nodes.
4. run the kube-restart.sh on the worker nodes.
Update: I am using minikube version: v1.25.2
The command mentioned in this thread did NOT work:
minikube start --memory=10000 --cpu 4 #this will FAIL
This, however, DID WORK (use cpus instead. I also changed values to show minimum requirement for Docker):
minikube start --memory=1800 --cpus=2 # this will work
minikube start --memory=1800 --cpus 2 # this will also work
minikube delete && minikube start
sudo minikube start --vm-driver=none (start minikube again)
This solved my problem
minikube delete
minikube start
just restarted the container
I have installed OracleVM, and created an Ubuntu machine. I have not tried any major cluster or tried deploying anything, I have started reading about Kubernetes and as an example just tried creating a simple pod. But I am getting host error, can anyone tell me where am I going wrong?
I have tried the simple kubectl run command
The snip of my issue
You need to disable swap on the system for kubelet to work. You can disable swap with sudo swapoff -a and restart kubelet service sudo systemctl restart kubelet
I use minikube v1.6.2, kubectl 1.17.
I start minikube without Virtualbox, with:
sudo minikube start --vm-driver none
Now, to stop it, I do:
sudo minikube stop
minikube stop # I don't know which one is the good one, but I do both
but, after that, when I do:
kubectl get po
I still get the pods listing. The only way to stop it is to actually reboot my machine.
Why is it happening, and how should I fix it ?
minikube stop when used with --vm-driver=none does not do any cleanup of the pods. As mentioned here:
When minikube starts without a hypervisor, it installs a local kubelet
service on your host machine, which is important to know for later.
Right now it seems that minikube start is the only command aware of
--vm-driver=none. Running minikube stop keeps resulting in errors related to docker-machine, and as luck would have it also results in
none of the Kubernetes containers terminating, nor the kubelet service
stopping.
Of course, if you wish to actually terminate minikube, you will need
to execute service kubelet stop and then ensure the k8s containers are
removed from the output in docker ps.
If you wish to know the overview of none (bare-metal) driver you can find it here.
Also as a workaround you can stop and remove all Docker containers that have 'k8s' in their name by executing the following command: docker stop (docker ps -q --filter name=k8s) and docker rm (docker ps -aq --filter name=k8s).
Please let me know if that helped.
I am trying to start a local Kubernetes cluster using minikube start and getting the following error.
Starting local Kubernetes v1.10.0 cluster...
Starting VM...
Getting VM IP address...
Moving files into cluster...
Setting up certs...
Connecting to cluster...
Setting up kubeconfig...
Starting cluster components...
E0912 17:39:12.486830 17689 start.go:305] Error restarting
cluster: restarting kube-proxy: waiting for kube-proxy to be
up for configmap update: timed out waiting for the condition
Any idea how to ensure it starts? I am using VirtualBox and this tutorial. I tried the tip given here but without luck.
Also any specific reason why it takes so long to even reach to this stage? Or is it usually this slow?
following are the points to be remembered while starting minikube for such errors.
1) close the VirtualBox if opened.
2) delete the previous temp files generated.
3) if you are behind the proxy set the proxy.
4) then do the following...
$ minikube stop
$ minikube delete
$ minikube start
Below steps works for me :
Note : Do not work with root user
$ sudo minikube stop
$ sudo minikube delete
$ sudo rm -rf ~/.minikube
$ sudo minikube start --kubernetes-version=v1.12.4
you can specify any existing kubernetes version of your choice with prefix v compulsory
make sure .minikube directory created in users home directory but not in /root
I try to run minikube v0.22.1 and kubectl v1.7.5 on MacOS with Virtualbox.
$ minikube start
Starting local Kubernetes v1.7.5 cluster...
Starting VM...
Getting VM IP address...
Moving files into cluster...
Setting up certs...
Connecting to cluster...
Setting up kubeconfig...
Starting cluster components...
Kubectl is now configured to use the cluster.
$ minikube version
minikube version: v0.22.1
$ minikube status
minikube: Running
cluster: Running
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
However all kubectl commands fail with "connection refused - did you specify the right host or port?"
$ kubectl version
Client Version: version.Info{Major:"1", Minor:"7", GitVersion:"v1.7.5", GitCommit:"17d7182a7ccbb167074be7a87f0a68bd00d58d97", GitTreeState:"clean", BuildDate:"2017-08-31T19:32:26Z", GoVersion:"go1.9", Compiler:"gc", Platform:"darwin/amd64"}
The connection to the server 192.168.99.100:8443 was refused - did you specify the right host or port?
The solution proposed here (sudo ifconfig vboxnet0 up) did not help, the vboxnet0 interface is up.
Any ideas or suggestions are highly appreciated.
If you run
kubectl config get-contexts
Do you get the following?
CURRENT NAME CLUSTER AUTHINFO NAMESPACE
* minikube minikube minikube
If not that means your kubectl context is not correctly setup. To setup the context correctly run this
kubectl config use-context minikube
You may have it stopped or saved for any reason. sometimes, after you enable/disable addons you may need to restart it.
1) Restart minikube VM, stop it
$ minikube stop
2) Start it again, make sure you assign enough cpu/memory (the following is just an example of how to pass it, you need to adjust it based on available resources in your machine)
$ minikube start --memory=10000 --cpu 4
If this didn't work out, you can do the following that will help you to know more about the underlying cause of problem:
Check minikube status and make sure the status is Running
$ minikube status
Or, check minkube logs:
minikube logs
Finally, if you couldn't fix it, you may need to delete and start it from scratch
$ minikube delete && minikube start
Ref: https://github.com/kubernetes/minikube/issues/1498
I will just drop this in here in case anyone find this question.
As of right now I don't know the versions of the OP's setup. So I'm going to assume he has the latest version that was available when he posted, which was: 0.22.1
Description
I had a similar issue. The cluster was timing-out irregularly. One moment I got answers using kubectl cluster-info dump another I didn't. Then it worked again, and then it didn't. I found a github bug report with a solution.
Solution
Remove your VirtualBox VM.
Remove the ./minikube folder.
Remove the minikube executable.
Install version 0.19.0.
Verify that minikube is working with: kubectl
Versions
OS: Windows 10 (Home edition)
Minikube bugged version: 0.22.2
Minikube working version: 0.19.0
Kubectl (client): v1.7.0
Kubectl (server): v1.6.0
EDIT:
I kept having some issue with minikube after I posted this original answer. I found something that fixed the issue completely.
It's related to the dynamic memory setting in Hyper-V.
Solution
1. Turn off the hyper-v minikube VM.
2. Go to the VM's settings.
3. Turn off dynamic memory allocation.
4. Assign a decent amount of memory.
5. Save and turn the VM on again.
This should work with any minikube version. See this github issue for progress on an automatated solution
When debugging the minikube commands, e.g.
$ minikube dashboard --loglevel 0 --logtostderr
some proxy issues became visible and could be solved.
I ran into this situation this morning (another Monday!) on MacOS 11.3 with minikube v1.19.0.
I ran minikube status and got the following:
E0503 14:15:43.912005 7308 status.go:412] kubeconfig endpoint: got: 127.0.0.1:64041, want: 127.0.0.1:56537
minikube
type: Control Plane
host: Running
kubelet: Stopped
apiserver: Stopped
kubeconfig: Misconfigured
WARNING: Your kubectl is pointing to stale minikube-vm.
To fix the kubectl context, run `minikube update-context`
Seemed like good advice, so I did run minikube update-context and got this:
🎉 "minikube" context has been updated to point to 127.0.0.1:56537
💗 Current context is "minikube"
After which everything worked like it did on Friday.
After the Linux Security OS patching and reboot we are unable to start kubernetes service received below error.
Error message: The connection to the server 192.168.1.101:8443 received while starting the kubernetes service.
This issue happened due to systemd package got updated during the security patching.
So We did below action to bring up the application On each master nodes
1. Update the /usr/lib/systemd/system/kubelet.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
2. Update the /usr/lib/systemd/system/kube-proxy.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
3. Run the kube-restart.sh on the master nodes.
4. run the kube-restart.sh on the worker nodes.
Update: I am using minikube version: v1.25.2
The command mentioned in this thread did NOT work:
minikube start --memory=10000 --cpu 4 #this will FAIL
This, however, DID WORK (use cpus instead. I also changed values to show minimum requirement for Docker):
minikube start --memory=1800 --cpus=2 # this will work
minikube start --memory=1800 --cpus 2 # this will also work
minikube delete && minikube start
sudo minikube start --vm-driver=none (start minikube again)
This solved my problem
minikube delete
minikube start
just restarted the container