I use minikube v1.6.2, kubectl 1.17.
I start minikube without Virtualbox, with:
sudo minikube start --vm-driver none
Now, to stop it, I do:
sudo minikube stop
minikube stop # I don't know which one is the good one, but I do both
but, after that, when I do:
kubectl get po
I still get the pods listing. The only way to stop it is to actually reboot my machine.
Why is it happening, and how should I fix it ?
minikube stop when used with --vm-driver=none does not do any cleanup of the pods. As mentioned here:
When minikube starts without a hypervisor, it installs a local kubelet
service on your host machine, which is important to know for later.
Right now it seems that minikube start is the only command aware of
--vm-driver=none. Running minikube stop keeps resulting in errors related to docker-machine, and as luck would have it also results in
none of the Kubernetes containers terminating, nor the kubelet service
stopping.
Of course, if you wish to actually terminate minikube, you will need
to execute service kubelet stop and then ensure the k8s containers are
removed from the output in docker ps.
If you wish to know the overview of none (bare-metal) driver you can find it here.
Also as a workaround you can stop and remove all Docker containers that have 'k8s' in their name by executing the following command: docker stop (docker ps -q --filter name=k8s) and docker rm (docker ps -aq --filter name=k8s).
Please let me know if that helped.
Related
I try to run minikube v0.22.1 and kubectl v1.7.5 on MacOS with Virtualbox.
$ minikube start
Starting local Kubernetes v1.7.5 cluster...
Starting VM...
Getting VM IP address...
Moving files into cluster...
Setting up certs...
Connecting to cluster...
Setting up kubeconfig...
Starting cluster components...
Kubectl is now configured to use the cluster.
$ minikube version
minikube version: v0.22.1
$ minikube status
minikube: Running
cluster: Running
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
However all kubectl commands fail with "connection refused - did you specify the right host or port?"
$ kubectl version
Client Version: version.Info{Major:"1", Minor:"7", GitVersion:"v1.7.5", GitCommit:"17d7182a7ccbb167074be7a87f0a68bd00d58d97", GitTreeState:"clean", BuildDate:"2017-08-31T19:32:26Z", GoVersion:"go1.9", Compiler:"gc", Platform:"darwin/amd64"}
The connection to the server 192.168.99.100:8443 was refused - did you specify the right host or port?
The solution proposed here (sudo ifconfig vboxnet0 up) did not help, the vboxnet0 interface is up.
Any ideas or suggestions are highly appreciated.
If you run
kubectl config get-contexts
Do you get the following?
CURRENT NAME CLUSTER AUTHINFO NAMESPACE
* minikube minikube minikube
If not that means your kubectl context is not correctly setup. To setup the context correctly run this
kubectl config use-context minikube
You may have it stopped or saved for any reason. sometimes, after you enable/disable addons you may need to restart it.
1) Restart minikube VM, stop it
$ minikube stop
2) Start it again, make sure you assign enough cpu/memory (the following is just an example of how to pass it, you need to adjust it based on available resources in your machine)
$ minikube start --memory=10000 --cpu 4
If this didn't work out, you can do the following that will help you to know more about the underlying cause of problem:
Check minikube status and make sure the status is Running
$ minikube status
Or, check minkube logs:
minikube logs
Finally, if you couldn't fix it, you may need to delete and start it from scratch
$ minikube delete && minikube start
Ref: https://github.com/kubernetes/minikube/issues/1498
I will just drop this in here in case anyone find this question.
As of right now I don't know the versions of the OP's setup. So I'm going to assume he has the latest version that was available when he posted, which was: 0.22.1
Description
I had a similar issue. The cluster was timing-out irregularly. One moment I got answers using kubectl cluster-info dump another I didn't. Then it worked again, and then it didn't. I found a github bug report with a solution.
Solution
Remove your VirtualBox VM.
Remove the ./minikube folder.
Remove the minikube executable.
Install version 0.19.0.
Verify that minikube is working with: kubectl
Versions
OS: Windows 10 (Home edition)
Minikube bugged version: 0.22.2
Minikube working version: 0.19.0
Kubectl (client): v1.7.0
Kubectl (server): v1.6.0
EDIT:
I kept having some issue with minikube after I posted this original answer. I found something that fixed the issue completely.
It's related to the dynamic memory setting in Hyper-V.
Solution
1. Turn off the hyper-v minikube VM.
2. Go to the VM's settings.
3. Turn off dynamic memory allocation.
4. Assign a decent amount of memory.
5. Save and turn the VM on again.
This should work with any minikube version. See this github issue for progress on an automatated solution
When debugging the minikube commands, e.g.
$ minikube dashboard --loglevel 0 --logtostderr
some proxy issues became visible and could be solved.
I ran into this situation this morning (another Monday!) on MacOS 11.3 with minikube v1.19.0.
I ran minikube status and got the following:
E0503 14:15:43.912005 7308 status.go:412] kubeconfig endpoint: got: 127.0.0.1:64041, want: 127.0.0.1:56537
minikube
type: Control Plane
host: Running
kubelet: Stopped
apiserver: Stopped
kubeconfig: Misconfigured
WARNING: Your kubectl is pointing to stale minikube-vm.
To fix the kubectl context, run `minikube update-context`
Seemed like good advice, so I did run minikube update-context and got this:
🎉 "minikube" context has been updated to point to 127.0.0.1:56537
💗 Current context is "minikube"
After which everything worked like it did on Friday.
After the Linux Security OS patching and reboot we are unable to start kubernetes service received below error.
Error message: The connection to the server 192.168.1.101:8443 received while starting the kubernetes service.
This issue happened due to systemd package got updated during the security patching.
So We did below action to bring up the application On each master nodes
1. Update the /usr/lib/systemd/system/kubelet.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
2. Update the /usr/lib/systemd/system/kube-proxy.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
3. Run the kube-restart.sh on the master nodes.
4. run the kube-restart.sh on the worker nodes.
Update: I am using minikube version: v1.25.2
The command mentioned in this thread did NOT work:
minikube start --memory=10000 --cpu 4 #this will FAIL
This, however, DID WORK (use cpus instead. I also changed values to show minimum requirement for Docker):
minikube start --memory=1800 --cpus=2 # this will work
minikube start --memory=1800 --cpus 2 # this will also work
minikube delete && minikube start
sudo minikube start --vm-driver=none (start minikube again)
This solved my problem
minikube delete
minikube start
just restarted the container
I have installed OracleVM, and created an Ubuntu machine. I have not tried any major cluster or tried deploying anything, I have started reading about Kubernetes and as an example just tried creating a simple pod. But I am getting host error, can anyone tell me where am I going wrong?
I have tried the simple kubectl run command
The snip of my issue
You need to disable swap on the system for kubelet to work. You can disable swap with sudo swapoff -a and restart kubelet service sudo systemctl restart kubelet
I am trying to runminikube start--vm - driver = virtualbox orminikube start--vm - driver = hyperv by enabling the hyper - visor, but i am getting below error.
Can Someone please take me out of this:
For future, please try to post text instead of pic in your question. Second thing is that you are using quite old versions.
Usually errors like:
status error: host: state: machine does not exist minikube windows
The "minikube" host does not exist
are shown where you have some "leftovers" from previous minikube cluster.
It's hard to determine root cause exactly as it would need exact steps you have performed.
1. Delete previous minikube and start again
You have to use command like:
minikube delete
if you specified name of cluster using
minikube delete -p <your-cluster-name>
After that you should start minikube again.
minikube start --vm-driver=<depends-on-your-needs>
Here you have all drivers you can use with minikube.
2. Use --force flag.
It would look like:
minikube start --vm-driver=hyperv --force
but it's also recommended to user minikube delete before this command.
3. Steps to run Minikube on Windows.
As you mentioned you already have docker, but if you would need to reinstall, you can find good tutorial on Docker official docs.
Good tutorial, how run Minikube on Windows 10 can be found here.
You can also check this StackOverflow thread for more updated version.
4. Further issues with starting minikube
If you will still have issues with running minikube, please update your question with debug logs. It can be found here.
minikube start --vm-driver=hyberv --v=7
or
minikube logs
trying to shell into the container by kubectl exec -it xxxxxx
but it returns
rpc error: code = 5 desc = open /var/run/docker/libcontainerd/containerd/faf3fd49262cc738e16368001eba5e1113abcb8a87e7b818cb84af3799906149/30fe901c16e0465aa15b596bf3e4f244fb12a7e4133b6e4da5aa35167a8dfb30/shim-log.json: no such file or directory
trying to reboot the node but not help
Thanks #Prafull Ladha
Eventually I restarted the docker (systemctl restart docker) of that Node which my pods could not be shelled, and it resumes to normal
The problem is with containerd, Once the containerd restart in the background, the docker daemon still try to process event streams against the old socket handles. After that, the error handeling when client can't connect to the containerd leads to the CPU spike on machine.
This is the open issue with docker and currently the workaround is to restart the docker.
sudo systemctl restart docker
It appears like some issue with the docker daemon. it would help if you add the logs from the container to research the root cause.
deploy alpine pod and see if you can get into the container. This is to isolate if the problem is with the platform or the pod that you are running.
kubectl run pingpong --image alpine ping 8.8.8.8
kubectl exec -it <pingpong-pod-name> sh
most likely something wrong with the pod that you are running. share the container logs for further help
I try to run minikube v0.22.1 and kubectl v1.7.5 on MacOS with Virtualbox.
$ minikube start
Starting local Kubernetes v1.7.5 cluster...
Starting VM...
Getting VM IP address...
Moving files into cluster...
Setting up certs...
Connecting to cluster...
Setting up kubeconfig...
Starting cluster components...
Kubectl is now configured to use the cluster.
$ minikube version
minikube version: v0.22.1
$ minikube status
minikube: Running
cluster: Running
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
However all kubectl commands fail with "connection refused - did you specify the right host or port?"
$ kubectl version
Client Version: version.Info{Major:"1", Minor:"7", GitVersion:"v1.7.5", GitCommit:"17d7182a7ccbb167074be7a87f0a68bd00d58d97", GitTreeState:"clean", BuildDate:"2017-08-31T19:32:26Z", GoVersion:"go1.9", Compiler:"gc", Platform:"darwin/amd64"}
The connection to the server 192.168.99.100:8443 was refused - did you specify the right host or port?
The solution proposed here (sudo ifconfig vboxnet0 up) did not help, the vboxnet0 interface is up.
Any ideas or suggestions are highly appreciated.
If you run
kubectl config get-contexts
Do you get the following?
CURRENT NAME CLUSTER AUTHINFO NAMESPACE
* minikube minikube minikube
If not that means your kubectl context is not correctly setup. To setup the context correctly run this
kubectl config use-context minikube
You may have it stopped or saved for any reason. sometimes, after you enable/disable addons you may need to restart it.
1) Restart minikube VM, stop it
$ minikube stop
2) Start it again, make sure you assign enough cpu/memory (the following is just an example of how to pass it, you need to adjust it based on available resources in your machine)
$ minikube start --memory=10000 --cpu 4
If this didn't work out, you can do the following that will help you to know more about the underlying cause of problem:
Check minikube status and make sure the status is Running
$ minikube status
Or, check minkube logs:
minikube logs
Finally, if you couldn't fix it, you may need to delete and start it from scratch
$ minikube delete && minikube start
Ref: https://github.com/kubernetes/minikube/issues/1498
I will just drop this in here in case anyone find this question.
As of right now I don't know the versions of the OP's setup. So I'm going to assume he has the latest version that was available when he posted, which was: 0.22.1
Description
I had a similar issue. The cluster was timing-out irregularly. One moment I got answers using kubectl cluster-info dump another I didn't. Then it worked again, and then it didn't. I found a github bug report with a solution.
Solution
Remove your VirtualBox VM.
Remove the ./minikube folder.
Remove the minikube executable.
Install version 0.19.0.
Verify that minikube is working with: kubectl
Versions
OS: Windows 10 (Home edition)
Minikube bugged version: 0.22.2
Minikube working version: 0.19.0
Kubectl (client): v1.7.0
Kubectl (server): v1.6.0
EDIT:
I kept having some issue with minikube after I posted this original answer. I found something that fixed the issue completely.
It's related to the dynamic memory setting in Hyper-V.
Solution
1. Turn off the hyper-v minikube VM.
2. Go to the VM's settings.
3. Turn off dynamic memory allocation.
4. Assign a decent amount of memory.
5. Save and turn the VM on again.
This should work with any minikube version. See this github issue for progress on an automatated solution
When debugging the minikube commands, e.g.
$ minikube dashboard --loglevel 0 --logtostderr
some proxy issues became visible and could be solved.
I ran into this situation this morning (another Monday!) on MacOS 11.3 with minikube v1.19.0.
I ran minikube status and got the following:
E0503 14:15:43.912005 7308 status.go:412] kubeconfig endpoint: got: 127.0.0.1:64041, want: 127.0.0.1:56537
minikube
type: Control Plane
host: Running
kubelet: Stopped
apiserver: Stopped
kubeconfig: Misconfigured
WARNING: Your kubectl is pointing to stale minikube-vm.
To fix the kubectl context, run `minikube update-context`
Seemed like good advice, so I did run minikube update-context and got this:
🎉 "minikube" context has been updated to point to 127.0.0.1:56537
💗 Current context is "minikube"
After which everything worked like it did on Friday.
After the Linux Security OS patching and reboot we are unable to start kubernetes service received below error.
Error message: The connection to the server 192.168.1.101:8443 received while starting the kubernetes service.
This issue happened due to systemd package got updated during the security patching.
So We did below action to bring up the application On each master nodes
1. Update the /usr/lib/systemd/system/kubelet.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
2. Update the /usr/lib/systemd/system/kube-proxy.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
3. Run the kube-restart.sh on the master nodes.
4. run the kube-restart.sh on the worker nodes.
Update: I am using minikube version: v1.25.2
The command mentioned in this thread did NOT work:
minikube start --memory=10000 --cpu 4 #this will FAIL
This, however, DID WORK (use cpus instead. I also changed values to show minimum requirement for Docker):
minikube start --memory=1800 --cpus=2 # this will work
minikube start --memory=1800 --cpus 2 # this will also work
minikube delete && minikube start
sudo minikube start --vm-driver=none (start minikube again)
This solved my problem
minikube delete
minikube start
just restarted the container