I have an issue in flutter installation on MacBook Air M1 chip. It drives me crazy. I get the error :
zsh: command not found: vim
screenshot
I enabled rosetta terminal and re-run it again, but same issue.
I tried almost all installation videos online but nothing helped.
You don't have vim. To install it, run the command below :
sudo apt-get install vim
You can also use nano. Also, it's vim ~/.zshrc (where ~/ refers to the home directory of the current user) and you also misspelled zshrc.
I suggest you follow the official docs for the correct installation steps.
I have also created a detailed blogpost about the installation steps and the possible issues that one might encounter. It is written extensively for MacBook Air with M1 chip running BigSur (which I work on).
Related
I am very new here, and also in programming.
I have found out that I have VS Code two times installed with different ways. When I started it from the KDE it ran well, but when I have started it from the current directory with "code ." it was an oss version without some extension and accounts.
Now I want to uninstall completely both of them. One version I could from terminal with yay --remove code. So the terminal can't see any versoion of vs code any more. But in the application launcher is vs code still there, I can run it and use completely. But I have no idea how to uninstall it.
I have already tried this: https://code.visualstudio.com/docs/setup/uninstall
you can uninstall from manjaro linux by visiting the add software>installed>code and clicking the trashcan near the name of the software. this will queue the action of deletion. Now just click apply on the bottom right of the screen and confirm all the things it will ask you. then it will uninstall code.
So I also had this problem, I found this command for uninstall vs code,
sudo pacman -R visual-studio-code-bin
A few days ago I installed Kali Linux. I'm trying to use Code-OSS instead of VSCode, since newest version of Kali doesn't have the libraries needed to install the normal one.
If I try to open a folder in Code-OSS from terminal using code-oss . or code ., it just opens Code on a new 'untitled-1' document, or opens the folder I was before closing Code-OSS. It doesn't open the folder I was in the terminal.
In these cases I need to open the folder I want through File > Open folder > search for folder and then open it.
The same just occurred with git commit or git commit --amend; it opens a new document, not the one I want to open.
I spent sometime searching for a solution on documentation, stackoverflow, google but could not find anything.
I cannot find any way to resolve this problem on Code-oss. Apparently it happened just with me.
Surprisingly for me, I was able to install VSCode following this tutorial, and it apparently managed to ignore the lack of libraries of Kali Linux that I mentioned above.
I hope this solution prevent any person in the future to get stuck on this.
I had the same issue when I first installed Kali-linux on my VM. Pretty anoying.
Just intall vscode by running :
sudo apt update
sudo apt install code
It will unistall code-oss and install VsCode, and it works now.
I have just installed debian 10 as well as vscode. I have been struggling with this for 3 days now.. I installed texlive from terminal with the following command:
sudo apt install texlive
I then installed the latex workshop extension in vscode and tried building a .tex file. The following error popped up:
Recipe terminated with fatal error: spawn latexmk ENOENT.
I then preceded to install latexmk from terminal with:
sudo apt install latexmk
The same error kept popping up after that. The output showed this.
[14:59:34] Recipe step env: {}
[14:59:34] cwd: /home/phoenix/Documents/stellies/year4/2021/s&s-414/pracs/prac-4/report
[14:59:34] LaTeX build process spawned. PID: undefined.
[14:59:35] LaTeX fatal error: spawn latexmk ENOENT, . PID: undefined.
[14:59:35] Does the executable exist? PATH: /app/bin:/usr/bin:/home/phoenix/.var/app/com.visualstudio.code-oss/data/node/bin:/home/phoenix/.var/app/com.visualstudio.code-oss/data/cargo/bin:/home/phoenix/.var/app/com.visualstudio.code-oss/data/python/bin
[14:59:35] The environment variable $SHELL: /bin/sh
I then proceded to review the texlive website. I noticed that i did not set the path variable to include the texlive binaries. The texlive website gives the following path to the binary files : PATH=/usr/local/texlive/2021/bin/x86_64-linux:$PATH
however /usr/local/texlive does not exist on my system for some reason. Where can i find the correct path to the texlive binaries on Debian 10?
I had the same problem. The root cause was: (1) software's bin folder missing from PATH; (2) bad file privileges. Consequently, VSC couldn't access latexmk, which explains the error messages.
In my case, the problem occurred on a mac, and specifically after I installed MacTex, which, in turn, installs Tex Live. I believe the same solution may apply to linux distros too.
Solution:
Claim file ownership (which was originally root) under folder /usr/local/texlive: sudo chown -R <username> /usr/local/texlive, where <username> is the OS-level user name. The fix will work for this specific user. If it is not enough, try instead setting group owner appropriately, and/or consider Step 3.
Add /usr/local/texlive/2021/bin/<software_dialect> to PATH. <software_dialect> depends on the installed software version: in my case it is universal-darwin; on linux it might be x86_64-linux.
If the problem persists, try to change file access permissions under /usr/local/texlive using chmod.
EDIT: As a final step, restart VSC for changes to take effect.
I recently encountered the same problem on MacOS Monterrey (M1 based). I used basictex (just for the context). As required by the installation instruction,
I added TeXLive to PATH,
installed latexmk package to the TeX distribution.
However, still got the same error as OP.
Afte reading the wiki again more carefully, what finally worked for me was as simple as restarting VS Code and MacOS. Everything works as expected after a reboot of the MAC.
I had this same problem on Mac recently, the fix that worked for me was to uninstall and reinstall the LaTeX Workshop extension.
I got the same issue , seems to be a misbehaving from Vscode on MacOS
check if the command is in the path on mac
-which command_you are running example which latexmk
If this output something that means you have your latex installed, otherwise go and installed it and make sure it is accessible via command line.
If latex is installed and you are getting that issue you can just restart your VSCode and everything will be okay.
Had a similar error and came across this post when looking for a solution.
I wanted to use texlive on Vscode with WSL2 on Windows 10. Installing texlive-full in wsl fixed this error for me.
On Mac, this is a way to fix the issue
Step1: reinstall mactex by downloading it from this link: http://www.tug.org/mactex/mactex-download.html
Step2: In your terminal do cd /usr/local, you should see texlive folder
Step3: In your terminal do sudo vim etc/paths to set the environment. Details are in this link: https://www.architectryan.com/2012/10/02/add-to-the-path-on-mac-os-x-mountain-lion/
Step4: In your terminal do /usr/local/texlive/2021/bin/x86_64-linux at the bottom. check the folder to see if the year is correct. Details in: http://www.tug.org/texlive/quickinstall.html.
Step5: Quit VC code completely, and reopen it.
I've tried probably 10 different sites looking how to download MongoDB on M1 Mac. And I would like to put this here for anyone who wants to make a step-by-step guide to get MongoDB working on M1 Macs. Feel free to edit this and provide your steps.
For example if I run the following command (brew install mongodb-community#4.4), the following error occurs:
Error: Cannot install under Rosetta 2 in ARM default prefix (/opt/homebrew)!
To rerun under ARM use:
arch -arm64 brew install ...
To install under x86_64, install Homebrew into /usr/local.
And then I try rerunning in ARM. And it installs successfully. Then I run mongod and get zsh: command not found: mongod. How is this possible?? It's weird because mongo command works just as expected. So mongodb-community is downloaded but I can't access the mongod command.
Does anyone know why? I've tried changing the path but mongod isn't anywhere local...
-- Starting from Rosetta Terminal:
I am using OdroidXu4 armv7 board, ubuntu 16.04. Dont know why my all menu disappear, but the files on desktop can still be operated.
I followed https://itsfoss.com/how-to-fix-no-unity-no-launcher-no-dash-in-ubuntu-12-10-quick-tip/ to reinstall ubuntu-destop or unity, but it didn't work.
Then I used the command below
dconf reset -f /org/compiz
setsid unity
The menu flashed a while then disappeared again, returned error:
file /dev/mali0 is not of a compatible version (user 10.6, kernel 10.1)
ERROR: The DDK is not compatible with any of the Mali GPUs on the system.
The DDK was built for 0x620 r0p1 status range [0..15], but none of the GPUs
matched:
file /dev/mali0 is not of a compatible version (user 9.0, kernel 8.0)
I was confused with the "GPUs", because I didn't have any GPU.
How to fix the problem, thanks for your help
I was using Ubuntu 16.04.In my case unity, launcher and even terminal is not working.I followed the steps as described in https://www.itsmearunchandel.co.in/linux/ubuntu/how-to-reset-ubuntu-desktop.html .
1. Go to command line mode, press Ctrl+Alt+F1
2. Give username and password.
3. Run the commands as described in the link.
This way my issue was resolved.