I've been trying to get a script working to check if my player is below a certain Y lvl, for a platformer. so it can be respawned to the beginning, But how do I put the y lvl inside a variable to check it? i cant figure it out lol
In the Update() run something like:
if(player.transform.position.y < 1)
{
//do something
}
where 'player' is the GameObject in question.
I am assuming you want to just want to compare (==, <=, >=, all that jazz is what I mean by comparing just in case you were not aware) the Y value to something like 10 for example. This is easy and you don't even need a variable necessarily for this.
//For the object position relative to the world
if(transform.position.y == 10) //"transform" gives you acces to the transform component
{ //of the object the script is attached to
Debug.Log("MILK GANG");
}
//For the object position relative to its Parent Object
if(transform.localPosition.y == 10)
{
Debug.Log("MILK GANG");
}
If you want to change the value of the position of your object then
transform.position = new Vector2(6, 9)//Nice
//BTW new Vector2 can be used if you dont
//want to assign a completely new variable
However, if you want to get a reference (Basically a variable that tells the code your talking about this component) to it.
private Transform Trans;
void Awake() //Awake is called/being executed before the first frame so its
{ //better than void Start in this case
Trans = GetComponent<Transform>();
Trans.position = new Vector2(69, 420); //Nice
}
This is the code way of doing it but there's another way that uses Unity
[SerializeField] private Transform Trans;
//[SerializeField] makes the variable changeable in Unity even if it is private so you
//can just drag and drop on to this and you good to go
Hope this help
if it doesn't
then welp I tried lel
You can use a script added to gameobject to check transform.position of the object.
if(transform.position.y < ylvl)
{
//do something
}
where ylvl is the integer of the height you want to check
Related
I'm coding a top down game, with point and click movement. Currently you are able to click on the map, but you can also click outside the map to move there. I added colliders to the walls, but you still try and go outside. Code example:
if (Input.GetMouseButtonDown(1)) {'move'}
But what I want is something like this:
if (Input.GetMouseButtonDown(1) on MAP) //map is the object
So I want to be able to only click on the map, and if you click outside the map, it won't do anything. Thanks!
My script:
using System.Collections;
using System.Collections.Generic;
using UnityEngine;
public class PlayerMovement : MonoBehaviour
{
public float speed = 10f;
Vector2 lastClickedPos;
//Rect inRect = new Rect(82.80f, -83.20f, 164.90f, 163.29f);
bool moving;
private void Update()
{
if (Input.GetMouseButtonDown(1) && GameObject.CompareTag("clickedOn")){ // && inRect.Contains(Input.mousePosition)
lastClickedPos = Camera.main.ScreenToWorldPoint(Input.mousePosition);
moving = true;
}
if (moving && (Vector2)transform.position != lastClickedPos)
{
float step = speed * Time.deltaTime;
transform.position = Vector2.MoveTowards(transform.position, lastClickedPos, step);
}
else
{
moving = false;
}
}
}
I think you can resolve your issue using tags or layers. I'll just list how to setup tags since it has a lot less setup vs. doing layers.
First off you'll need to create a tag and since Unity has good documentation on stuff like this I'll just link it here: https://docs.unity3d.com/Manual/Tags.html
Once you created your tag and tagged the ground/environment/area you want to have be clickable with the tag then you just need to find the object you want to collided with and use CompareTag so to put that in an example here is what your if statement could look like:
if (Input.GetMouseButtonDown(1) && collidedObject.CompareTag("TagNameGoesHere"))
{
//Movement goes here
}
Just to note I've named the gameObject that was found to collidedObject but you can name it whatever you want.
Hopefully this helps, let me know if I need to clarify something, it has been awhile since I've done a stackoverflow answer so I may have left something out.
Edit: Alright so adding onto this, you'll need to also look into how to do raycasting to check what object you click on so you can determine if it's a spot you can move to.
I've just tested this in a project just to make sure I understand it (I've used raycast a lot but never really done point to click movement before).
Essentially I've broken down things into 3 statements, which you can add together into one if statement but it's more so I can explain everything in detail:
if (Input.GetMouseButtonDown(1))
What you use currently, we want to make sure we only do the next few checks when we click
if (Physics.Raycast(playerCamera.ScreenPointToRay(Input.mousePosition), out hit, Mathf.Infinity))
So this here, is essentially drawing a line from a position, in this bit we are using the player camera which is just a regular camera reference and converting a point on screen into a ray which we then set the length to be Mathf.Infinity (this can be whatever float, I've just used this for an example) and then we output the hit object to hit which is a RaycastHit struct.
if (hit.collider != null && hit.collider.CompareTag("TagNameGoesHere"))
Now we finally check to see if the collider is not null (in case we hit the sky or something, which shouldn't happen for you in a top down game) and also that the object has right tag. Again you need to setup the tags which I've listed above and make sure you set the correct game objects in scene to have the correct tag. After which you should be able to move to the position (using the position you've setup and such is fine)
So it should look something like this:
if (Input.GetMouseButtonDown(1))
{
if (Physics.Raycast(playerCamera.ScreenPointToRay(Input.mousePosition), out rayCastHit, Mathf.Infinity))
{
if (hit.collider != null && hit.collider.CompareTag("TagNameGoesHere"))
{
//Movement goes here
}
}
}
Make sure to also put a reference to the camera and RayCastHit objects (these are the playerCamera and rayCastHit variables in the above). For my example script that I created I made them global variables.
There is a code for instantiate cube into the list and change a Material of each clone when it hits on the ground
The following code works but not in Real-Time. Update function works like a Start function for a Foreach method
How to get a value of item.transform.position.y in the Update function Real-Time?
public GameObject cubePrefab;
public Material RedMat;
public float GroudLevel = 0.5f;
void Update()
{
if (Input.GetMouseButtonDown(0))
{
List<GameObject> cloneList = new List<GameObject>();
//instantiate clones into the list
for (int i = 0; i < 10; i++)
{
var clone = Instantiate (cubePrefab,new Vector3(Random.Range(-3f, 3f),
Random.Range(4f, 10.5f),Random.Range(-3f, 3f)), Quaternion.identity);
cloneList.Add(clone);
}
//if clone is grounded change a Material for each clone
foreach (var item in cloneList)
{
//Debug.Log(item.transform.position.y);
//check if clone is on the ground
if(item.transform.position.y < GroudLevel)
{
item.GetComponent<Renderer>().material = RedMat;
}
}
}
}
There is a screenshot for a GroudLevel = 7
The reason this function isn't working is because the pivot (transform.position) of your item is always in the center of the object. This isn't something you can change in Unity (nor would you necessarily want to).
On top of this, you're checking if the item is under the ground, and not on it when you use < insteaad of <=, because the position needs to be less than groundLevel to return true.
There are several solutions here.
The simplest would involve moving all of this logic to an OnCollisionEnter or OnTriggerEnter method. For more information on this, check the Unity documentation.
Another solution would be to find a way tthe size of the object, divide it by two, and check if
item.transform.position - halfSize <= groundLevel;
This seems really cumbersome and overly complex, however. You'd be better off using Unity's built-in collision system, unless you have a reason not to.
I wanted to make a vertically scrolling background with 3D assets (2D pictures works fine, but i wanted the cool lighting effect), and i kept failing doing something i though would be so simple.
so here's my current progress:
public Vector3 target;
private Transform Top_Top_Left_Rescroll;
void Start (){
target = GameObject.FindGameObjectWithTag ("Top_Top_Left_Rescroll").GetComponent<Transform>();
}
void Update () {
if (gameObject.transform.position.y <= -12) {
gameObject.transform.position = new Vector3 (target.x, target.y, target.z);
}
}
}
The object resets it's position to 0 after the if statement (the rotation and scale weren't affected), and i ran out of ideas to do what i want.
You are passing a Transform to a Vector3.
try :
target = GameObject.FindGameObjectWithTag("Top_Top_Left_Rescroll").transform.position;
ps: I'm not sure if you really want your target position to never change, but you are passing it's value during Start() so you will always place your gameObject in every frame at the same initial position.
I've created an arm with a custom pivot in Unity which is essentially supposed to point wherever the mouse is pointing, regardless of the orientation of the player. Now, this arm looks weird when pointed to the side opposite the one it was drawn at, so I use SpriteRenderer.flipY = true to flip the sprite and make it look normal. I also have a weapon at the end of the arm, which is mostly fine as well. Now the problem is that I have a "FirePoint" at the end of the barrel of the weapon, and when the sprite gets flipped the position of it doesn't change, which affects particles and shooting position. Essentially, all that has to happen is that the Y position of the FirePoint needs to become negative, but Unity seems to think that I want the position change to be global, whereas I just want it to be local so that it can work with whatever rotation the arm is at. I've attempted this:
if (rotZ > 40 || rotZ < -40) {
rend.flipY = true;
firePoint.position = new Vector3(firePoint.position.x, firePoint.position.y * -1, firePoint.position.z);
} else {
rend.flipY = false;
firePoint.position = new Vector3(firePoint.position.x, firePoint.position.y * -1, firePoint.position.z);
}
But this works on a global basis rather than the local one that I need. Any help would be much appreciated, and I hope that I've provided enough information for this to reach a conclusive result. Please notify me should you need anything more. Thank you in advance, and have a nice day!
You can use RotateAround() to get desired behaviour instead of flipping stuff around. Here is sample code:
public class ExampleClass : MonoBehaviour
{
public Transform pivotTransform; // need to assign in inspector
void Update()
{
transform.RotateAround(pivotTransform.position, Vector3.up, 20 * Time.deltaTime);
}
}
I have a script that generates objects in the scene from a prefab, and I have a moveable cube. I want a script that gets the name of the object if the distance between the cube and the cloned object is < 0.3f.
I have this UnityScript:
var distance1 = Vector3.Distance(Food.transform.position, cube1.transform.position);
Debug.Log(distance1);
if(distance1 < 0.3f)
{
//Destroy nearest object
}
In this case I think is better to use Collision Detection as recommended by Barış Çırıka... but if you want to get it by distance I think you can do something like
var MyCube = GameObject.FindGameObjectsWithTag("MyCube");
LateUpdate(){
var distance = Vector3.Distance(this.gameObject.transform.position, MyCube.transform.position);
if(distance < 0.3f)
{
Destroy(this.gameObject);
}
}
this script should be attached to every object you instantiate.
If you know which object is near. You can use Destroy.
Destroy(cloneObject);
If you don't know which objects are near, you can use List to add clone objects
and check it is near.(When you create clone you need to add clone to the list.)
You need to add using System.Collections.Generic; for using List.
Example code: (It's C# code but you can understand logic)
....
using System.Collections.Generic;
public List<GameObject>cloneObjectList;
private void cloneObject(){
GameObject cloneObject = Instantiate(originalPrefab,position,rotation);
cloneObjectList.add(cloneObject);
}
private void checkDistance(){
foreach(GameObject cloneObject in cloneObjectList){
float distance = Vector3.Distance(Food.transform.position, cloneObject.transform.position);
if(distance <0.3f){
cloneObjectList.Remove(cloneObject);
Destroy(cloneObject);
}
}
}
Moreover you can use Collision detection system.