I'm trying to install WindowsSubsytemAndroid and PowerShell tell me that I Need The Following:
"Microsoft.UI.Xaml.2.6" with minimum version 2.62108.18004.0.
I managed to install (Get-AppxPackage Show This Two):
Microsoft.UI.Xaml.2.6 2.62106.23002.0
Microsoft.UI.Xaml.2.7 7.2109.13004.0
But This Doesn't Solve The Problem. Any Idea ?
click this link https://store.rg-adguard.net/
URL: https://www.microsoft.com/store/productId/9P3395VX91NR
Channel: Slow
click the tick button, below you will get a set of files. select the files you want and install it via powershell
Once you navigate to the folder where the downloaded file exists (in powershell)
run this command to install.
Add-AppxPackage Microsoft.UI.Xaml.2.7_7.2109.13004.0_x64__8wekyb3d8bbwe.Appx
Related
HEY GUYS I tried everything i could to make it work and I somehow did!!!
I'm running a windows 7 64-bit system, but i'm sure it can work for anything else. These are the steps I did:
Delete pgadmin 4 folder which can be found in C:\Program Files\PostgreSQL\14\pgadmin 4 or where you downloaded the PSQL folder. (This is to install a new version and get rid of the version you have)
Click the link to install a new version, is version 5, it worked for me:
https://pgadmin-archive.postgresql.org/pgadmin4/v5.7/windows/index.html
Download the exe file above, and go thru the steps.
After it's downloaded, make sure to go to 'Program Files', if you see pgAdmin 4 v5 folder next to the PostgreSQL folder, drop the pgadmin 4 v5 folder in the PostgreSQL Folder\14 and leave it there. EXAMPLE (C:\Program Files\PostgreSQL\14(version)\pgadmin4 v5 )
Click Windows + R and type in %APPDATA%, see if in the Roaming folder there is a 'pgadmin' and click on the folder.
DELETE everything found inside the folder but NOT the folder itself.
Go to windows bar where you can run the 'pgadmin4 v5': remember this is the newer version, so make sure you deleted the previous version just in case you don't get confused.
Right-click pgAdmin v5 and run as administrator, click yes, and then let it wait until it goes to the server.
If this doesn't work the first time don't worry, it took me a few times, but keep going to Windows + R and type %APPDATA%, go to Roaming\pgadmin and delete everything found inside the folder again, and then run the pgAdmin v5 as administrator again.
LET ME KNOW IF THIS WORKS. IF NOT I CAN HELP YOU WITH OTHER STEPS BUT THIS SHOULD WORK!!!!
I need to change some configuration information to use SpringToolSuite4. But when I downloaded SpringToolSuite4 4.1.2 and unziped, there isn't SpringToolSuite4.ini file. So I created one, but SpringToolSuite4 didn't reference to SpringToolSuite4.ini file when starting.
I solved the problem with these steps:
Open the commad terminal;
go to the location where you put the jar file;
Run "java -jar [****.jar]";
PS: Make sure you have java runtime installed in you machine and you have the correct environment settings.
Hope this could help you.
I guess this is an admin rights problem:
I have downloaded the self extracting .jar file:
spring-tool-suite-4-4.8.1.RELEASE-e4.17.0-win32.win32.x86_64.self-extracting.jar
I saved it in c:\Program Files (needs admin rights).
Double-clicked it (not as admin) -> Same error (cannot find the SpringToolSuite4.ini file).
I have started TotalCommander (you may use a differnt explorer) with admin rights -> Problem fixed.
Open jar with winrar. Open the "contents.zip". Move to "sts-4.8.0.RELEASE" folder in documents. After, we run the program.
jar:spring-tool-suite-4-4.8.0.RELEASE-e4.17.0-win32.win32.x86_64.self-extracting
You can solve the problem like this.
When I downloaded it for the second time. I also got this error(SpringToolSuite4.ini). That's how I passed. instead of downloading it again. Downloading it again didn't work.
right click on the sts icon inside the extracted sts-bundle package and select show content.
I have installed the flutter folder in Program Files (x86) and have added the .../flutter/bin directory to path. Running flutter doctor in the flutter_console.bat window or just a normal command prompt window gives nothing
and running as admin in either gives me the error:
Updating flutter tool...
\flutter\.pub-cache was unexpected at this time.
What do I do? Thanks in advance for any help.
You shouldn't put Flutter in Program Files. These folders are not writeable by non-Admin users so may fail when trying to write files if you're not running your console/editor as Admin.
Cut flutter folder from Program Files (x86) to Program Files. It has problem with x86 but works fun in x64 directory. And update the environment variables with the new path.
I had mine fixed by just removing the special character from the directory name.
I organize my folders with numbering and parenthesis like so
1) xyz
2) yza
3) aws
...
25) flutter
I changed it to
1) xyz
2) yza
3) aws
...
25 flutter
don't forget to change it in environment variables too
Ok so this is probably not the way to go about it but what I did to solve this problem was remove this line
SET pub_cache_path=%FLUTTER_ROOT%\.pub-cache
from flutter/bin/flutter.bat. I then went through the installation process and once everything was working changed the flutter.bat file back by adding the line again and then ran flutter again. I got no errors from doing this and I appreciate that this is probably not the correct way to go about solving this problem but it worked for me so I am posting it as the answer if others want to try it.
1.Set the environment variable by copying the bin directory ex: C://programfiles/flutter/flutter/bin
2.Go to Control panel -> User Accounts -> User Accounts-> Change environment variables -> Choose User variable -> Path -> Edit -> New -> Paste the link -> click ok
3.Restart Computer -> Open powershell -> Type "Flutter"
4.It should be working now.
1- First make sure that you running cmd or powershell as admin.
2- If didn't work try to restart PC.
3- If didn't work try to move the flutter folder to another path and make sure that you did the required changes on Environment Variables.
4- If didn't work, just delete the cache folder in "flutter\bin" and try again by writing
flutter doctor
Also as a note, try not to put your flutter directory inside the special directories which need a special permissions like Program Files.
I had originally installed it in d:\Program Files (x86) which is NOT the system folder, but an alternate install location that does not require elevated privs, and I was getting this error. I moved flutter to just d:\flutter and it worked. I don't know if it was spaces or the parentheses that was problematic.
Extract the zip file and place the contained flutter in the desired installation location for the Flutter SDK (for example, C:\src\flutter; do not install Flutter in a directory like C:\Program Files\ that requires elevated privileges).
You are now ready to run Flutter commands in the Flutter Console!
I am unable to install the following question types with my moodle
1. Drag and drop into text (qtype_ddwtos)
2. Drag and drop matching (qtype_ddmatch)
I am using I am using Moodle 2.5.4 (Build: 20140113), php 5.4.7, MySQL 5.5.27, Apache 2.4.3, XAMPP server version 1.8.1
I have downloaded the plugins and unzip it then placed in the moodle->question->type. After that if I click the notifications link it is showing only blank page. Please advise me how to go further and how to resolve this issue and make use of those plugins.
the idea is to give the 755 permission to the "ddmatch" and "ddwtos" folders.
1- copy the two folder to moodle->question->type (as you did)
2- cd to this this directory:
cd /opt/lampp/htdocs/moodle/question/type
3- and change the permission of the two folder:
sudo chmod -R 755 ddwtos ddmatch
it worked for me !
I just checked out 2.5.4 and downloaded the plugins you mentioned - making sure they were both 2.5 versions - and extracted them into /question/type
https://moodle.org/plugins/view.php?plugin=qtype_ddmatch
https://moodle.org/plugins/view.php?plugin=qtype_ddwtos
Then went to notifications, they both require other plugins
qtype_match doesn't exist unfortunately
https://moodle.org/plugins/view.php?plugin=qtype_match
However gapselect does, so I downloaded that one too
https://moodle.org/plugins/view.php?plugin=qtype_gapselect
Then ran the upgrade and no errors were shown.
Is this on linux? Its possible that the extracted files haven't got the correct permissions - check the ownership of the folders : http://docs.moodle.org/25/en/Security_recommendations#Running_Moodle_on_a_dedicated_server
I would also double check that the files have been unzipped into the correct folder - so you should have /question/type/ddmatch, /question/type/ddwtos and /question/type/gapselect
If all that is okay then, like davosmith says, if you can switch on debugging and paste the error here. If you can't get into the system then edit /config.php and add these 2 lines after $CFG = new stdClass();
$CFG->debug = 32767;
$CFG->debugdisplay = 1;
Then try going to notifications again and see what the error is /admin/index.php
I'm trying to change the installed language with install4j, according to the documentation the parameter I should use is:
-Dinstall4j.language=[ISO code]
I'd like it to install in English but it keeps installing it in Swedish, the iso-codes I've tried is: en and En_us.
This is how I add the parameter, is this correct or am I doing something wrong?
> .\Setup_64bit.exe -Dinstall4j.language=en
Environment: Windows 7, Powershell, Install4j 5.1.6
The simplest way I found to solve this was installing it locally on a OS with the correct language selection. Then I went to the .install4j folder(which can be found in the same folder where your application is installed) and inside this folder there is a response.varfile. The .varfile can be put next to the installation .exe, and if given the same name as the .exe file but with .varfile the installer will automatically use this response-file to select language! :)
Using -Dinstall4j.language=en is correct, but if you have already installed it before, a "Load a response file" action in your project will load the response file from previous installation and override the selection on the command line.