I have created a simple generic inquiry that shows some data after joining two tables. I am now struggling to implement a condition that should make the result only contain rows where a date field is equal to yesterday date.
I am a bit annoyed as Acumatica has created the method `today()` neatly, but not a `yesterday()` or `tomorrow()`.
Does anyone have a good solution that they care to share?
Help is much appreciated,
Cheers.
P.s
I have made this very hackish solution that somewhat works, but breaks between change in month or year.
=CStr(Year(Today()))+CStr(Month( Today() ))+CStr( Day(Today())-1)
Okay, so I found the solution to my problem!
I read that Acumatica is coded C# and.NET which made me think of how adding dates is done there. You utilise the DateAdd(date, interval, number) under the time tab to create relative changes to date.
In this case, the date is the time source from where you want to change, interval is in which interval/dimension you wanna move, for example, 'd' is for days. You can find more prefixes here: crosspost. Lastly, number is how much you want to change in the interval, in my case -1.
TLDR; Use DateAdd(Today(), 'd', -1) to get the previous date in relation to the current date.
You can simply write Equals to #Today-1 for Yesterday like below:
Related
My boss asked me to add a double slider input control for the date information on a report on Webi.
We have several columns and two of them display a date (start and end date of procedure). So I need to have two double slider, one for each date.
I've been searching for a whole day now and I know that it is not directly possible to use double slider with dates, because double slider only works with values (measures) and dates don't have that.
But I managed to create two more variables on the business layer. I used the following SQL function:
CAST(currentDate as Bigint))
These variables are displaying the date as numbers (e.g. 1090101 for 01.01.2009 (format is "dd-MM-yyyy")).
And it is working great! But it displays the dates as number, which is not possible to use for work. No one will know which date is 1090101. I could perhaps let both columns (date as date and date as number) in the report, so people could check the date they want to filter with the input control and select the right number on the slider. This could be a workaround, but not a clean one, I think.
I tried to change the format of the date as number to a date format, but then I could not use the slider anymore (even if the variable is a number).
I looked for a way to change the formatting of the values displayed on the slider, but with no luck.
So I'm asking for your help. Does anyone know how I could make this work?
Is there really no solutions for such a useful way of filtering data? I mean, filtering data by an interval of dates is surely something people want to do quite often, I assume.
Thank you in advance for your time.
(Version Webi : SAP BusinessObjects BI Platform 4.2 Support Pack 8 Patch 6,
Version: 14.2.8.3671)
You could format your date value as year, month, day and then convert it to a number so the value you are filtering on makes a little more sense. Like this...
=ToNumber(FormatDate([Your Date];"yyyyMMdd"))
It will be better than just an arbitrary number, but certainly not perfect since you will have large chunks of your range for which there never will be any corresponding data (e.g. 20211232 through 20220100).
What is wrong with just a Minimum and Maximum input controls? They are more intuitive and simple to create. Sometimes what your user or boss asks for is a bad idea and/or just not possible.
I'm pretty new in Tableau. I have looked at the forum already and the answered suggested. But I'm not quite sure it match my question.
I have a bunch of records. This is about registration for a sport lesson depending on time. All of them have a start date and and some of them a finish date. The other never finish (They continue until date T with T = now).
My goal is to compare only the first 6 months of all my records, I think there are 50 of them, like the evolution during this period of time. So, for some the start date would be in January 2009, for some other, it would be in May 2016, etc.
As field provided, I have the start date and the number of person that have subscribed those lesson through time.
So, do you if there is any to achieve this goal? Is there enough detail for you to understand what I am saying ?
Thx to you guys !!
EDIT
You can find enclosed a screenshot of the result that I already have.
number of registration for all lesson through time
I'm not sure to be clear, what I try to do is to compare the first 6 months only of each courses. So the evolution of the first 6 months of this course compare to the evolution of the first 6 months of this other course and so on :)
If I understand your question correctly you are wanting to show only the first six months of your data but you want this by each category.
I am assumuming that by definition this means 6 months from the first record in your data for each category.
In order to achieve this I would create a true/false flag using a level of detail expression. As you are new to tableau I would suggest you do some reading on this but basically you can force a calculation to be at a certain level of the data rather than at the row level. You use this to find the minimum date in the table and then use a date diff to return true if the actual date field is within 6 months of this.
Create a calculated field as follows:
[date] <= DATEADD('month', 6, { FIXED [category] :min([date])})
Then drag this onto your filters pane and select "TRUE". This should give you only the first six months of records for each category.
Let me know if you need anything else.
We have a vendor which one field in the database is a number and somehow in the app interface it shows the date,
I'm trying to figure out how is this conversion
Here is the data:
this number 15862 generates this date 06/05/2013
I have no idea how, the vendor told us it is NOT a custom logic conversion it was used a tsql function although I can't figure which one.
I tried using "convert" without success.
I don't think that's from a tsql function considering it's derived using the UNIX time epoch. Basically it's number of days since 1969-12-31
But you could get it using tsql like so:
select datediff(d,'1969-12-31','2013-06-05')
It looks like it's using a base-date of 1/1/1970 (actually 12/31/1969) and the number represents the number of days after that.
Most probably this is saved as an offset in days since 01/01/1979:
date('m/d/Y', 15862*3600*24) gives 06/06/2013 and
date('m/d/Y', 15862*3600*24-(3600*24) gives exactly 06/05/2013
I am having trouble grouping certain results in a work in progress report that arranges by start date, I have grouped using fixed values before but because the dates keep moving I am unsure what to do.
The start date is WIP_Schedule.Start_Date
the groups I am trying to create are:
[Group1] Overdue = the current date has passed the start date.
[Group2] (Yet to be named) = the current date 2 week period prior to the start date
[Group3] To Do = the current date after the two week period prior to the start date.
I am after a works instruction on how to achieve this.
I know this isn't a lot of information, if you require any more please ask.
Thanks,
Daniel
This is a pretty straightforward requirement, so you should be able to figure it out by searching the web. However, I'll give you part of the answer and hopefully you can figure it out.
Start by creating a formula to figure out the status of the date.
If {WIP_Schedule.Start_Date} > current date then "Overdue"
Else......
Then you can group based on that formula. All you have to do is figure out the rest of the formula.
Upon logging into their accounts, each user has their login date and time stored to the database. What I was looking to do however is figure out the amount of days (or preferably convert into months if greater than a month) so that if a user views their profile they can see how active the band are. Also, this could benefit me in terms of keeping active profiles top of the agenda for content on the site so that it doesn't become stale from inactive users content filling up main page content.
I'm using ColdFusion so i'd be looking for a way to find for example how many days ago #lastLogin# was from #now()#. So say if the date of the last login was 23/04/2013 and todays date is 29/04/2013 it would read "Last Active, 1 day ago." However if the last login was 23/03/2013, it would read "Last Active, 1 month ago".
Anybody know how to do this? Thanks.
P.S I currently have no code from testing this as I have no idea where to start in terms of achieving this.
Use DateDiff
<cfset days = dateDiff("d", LoginDateVariable, now()) />
It's as simple as that.
P.S I currently have no code from testing this as I have no idea where
to start in terms of achieving this.
This doesn't answer your direct question but to help you know where to get started, I would strongly suggest reviewing the built in ColdFusion functions and tags that are available to you.
Tags
Tags by function
Functions
Functions by category
Also, Google searches usually land you at the docs, just add "coldfusion" to your search string. Searching google for coldfusion date functions yields very helpful answers, the first of which are a list of all ColdFusion date functions.
Dale's answer is spot on. But I would also suggest returning it as a variable with your query. Let the SQL server do the work. It's very efficient for those types of calculations. Not that CF can't do them well, too. But it's probably more appropriate for SQL to do that lifting. Especially if you're already returning the lastLogin date.
It would be similar to the CF solution:
SELECT ...., lastLogin, DATEDIFF(d, lastLogin, GETDATE()) AS LastLoginDays
FROM ....
WHERE ....
That would give you the number of days. You'd have to decide how you wanted to define a month if you wanted to break it out by month/day. That would get a bit more complex. You could write a SQL function that could be run on both dates and give you an accurate count of days/months/years since last login.
One other thing to keep in mind: Where are the dates being generated? When you insert loginDate into the database, are you doing a now() in CF before you insert it or are you doing a getDate() in SQL when you insert it? Again, I would let the database do your date logic, but you'd want to compare the two dates from the same source. For instance, if your loginDate was a database getDate() then you may not want to compare that to a CF now(). One goes by the datetime of the SQL server and the other goes by the datetime of the CF server. They could be different.