Since the update to 3.1.0 via RubyInstaller under Win 10 there is a problem with alt gr in irb. When I try to enter { (German keyboard alt gr + {) I get ^[{. Any idea what's going wrong? BTW 3.0.2 was working fine.
Fixed:
git clone https://github.com/ruby/reline
cd reline
rake install
https://github.com/ruby/reline/pull/425
Alternatively you can install or update reline using gem :
gem install reline
This issue (altgr+4 => ^[{) also occurs with irb/ruby installed via msys2.
As a side effect you might notice a speed up when copy/pasting inside irb.
Ps: not enough reputation to just comment previous answer
Related
Good evening people, I am trying to install pgadmin4 on fedora 36, I followed all the steps in the documentation and pgadmin4 and its dependencies were installed correctly but I do not know how to start it, or open it and it does not let me configure it on the web because I do not create the directory described in the final step to configure the web version.
I had the same problem. I solved it installing pgadmin4 from linux-pachages
https://linux-packages.com/fedora-36/package/pgadmin4-qtx86-64
I followed the same instructions but mistakenly changing "yum" to "dnf" out of force of habit. I found I got an install out of it which seemed OK at a glance, but it was just documentation and not an executable, and there was no shortcut added to run pgAdmin. Perhaps you might have inadvertently done something similar? After uninstalling, I tried again using "yum" exactly as documented and the latest executable installed without any issue. So the steps to install that would work for me were as follows. (Desktop version in my case.)
sudo rpm -e pgadmin4-fedora-repo
sudo rpm -i https://ftp.postgresql.org/pub/pgadmin/pgadmin4/yum/pgadmin4-fedora-repo-2-1.noarch.rpm
sudo yum install pgadmin4-desktop
The QT workaround also mentioned as an answer worked for me, but I wanted to avoid that since it is an earlier release (6.9) than the current 6.11, isn't officially supported and fires a warning about that every time on start up saying some functionality may be missing, which is not good for clients to see potentially in my case.
Same problem - couldn't open it after installing. You have to install pgadmin4-desktop not pgadmin4.
I use the described way for Fedora 29 but when I type sudo dnf install code I receive a long list of - nothing provides and , for example libgconf-2.5.4 (64 bit) ...etc etc.
I have tried to use nogpgcheck, but that also does not work.
If it is relevant when it starts after dnf check-update it says Failed to set locale, defaulting to C.UTF-8
I have previously installed VSCode on this laptop but then when I wanted to use another file, using File the path is shown a the top but there is no list of files. I then deleted VSode from the laptop and now I cannot install it again.
Thank you for your attention. I am awaiting your answer, thank you.
James Gibbens
So, I use Fedora, and I always do it like so:
Go to: https://code.visualstudio.com/docs/?dv=linux64_rpm (hopefully this triggers a download for you)
Then I just double click to install, through nautilus. That works like a charm for me. You should also be able to do sudo dnf install code-*.rpm in the command line, but I tend not to bother since I'm running gnome and chrome anyway, so it's pretty seamless to just use the UI provided.
Debian Jessie, as well as sid, have a mercurial-git package which contains the hg-git plugin. However, this package was (auto-)removed from Debian Stretch to to a release-critical bug.
But - I need it installed and running. Surely this should be possible, right?
Well, I followed the installation instructions on the plugin page:
I ran apt-get install python-setuptools python-setuptools-git python4-setuptools python3-setuptools-git
I ran easy_install hg-git and it seemed to work
But still, when I run various mercurial operations I get, as the first line, the error message:
*** failed to import extension hgext.git: No module named git
(regardless of whether I'm doing anything git-related or not.)
My questions:
Why is this happening?
What do I need to do in order to make the error message go away while having hggit working?
Now,
How do I correctly install dulwich to get hg-git working on Windows?
Apparently, that critical bug doesn't manifest always (and perhaps only under very specific circumstances), so you can try installing the Debian sid version of the mercurial-git package (that is, version 0.8.11-1 at the time of writing). There's a SuperUser question about how to do this:
https://linuxaria.com/howto/how-to-install-a-single-package-from-debian-sid-or-debian-testing
my personal opinion in this case is to simply install the .deb file, which you can get from here (it's not platform-specific; at the link you'll need to choose a mirror.) That makes the error message go away, at least assuming you have:
[extensions]
hgext.bookmarks =
hggit =
in your ~/.hgrc file.
I have a critical problem with MySQL Workbench: I actually cannot edit the "Columns" tab, because it is greyed out.
I tried to edit a table's columns both for a newly created diagram and for an existing diagram, but with no luck. Is there a bug in the last versions of WB, or am I missing something else?
I found this problem both with the WB version installed via the OS package management (apt) and with the version installed from source.
OS: debian jessie/sid
WB version (installed via APT): 6.1.7 build 1788 (6.1.7+dfsg-1)
WB version (installed from source): 6.2.3 build 2280
P.S. I have already readed a couple of similar questions (see here and here), but they don't fit with my problem.
If you want it to work before Debian updates it, I suggest you to download the mysql-workbench source, apply this patch, build the package and then install it.
EDIT:
Instructions
As normal user, open a terminal and do the following:
cd ~
mkdir mysql-workbench-source
cd mysql-workbench-source
su root (type root password)
apt-get install build-essential
apt-get install pbuilder
apt-get source mysql-workbench
apt-get build-dep mysql-workbench
cd mysql-workbench-6.1.7+dfsg/frontend/linux/linux_utilities
cp ~/Downloads/glib.diff . (don't forget the last dot).
patch <glib.diff
cd ~/mysql-workbench-6.1.7+dfsg
debuild -us -uc -b (this will take a while)
cd ..
dpkg -i mysql-workbench_6.1.7+dfsg-1_amd64.deb
dpkg -i mysql-workbench-data_6.1.7+dfsg-1_all.deb
It should be fixed now.
If it's like my problem was - I created a table and I couldn't add columns - there was a panel over the editable area. Maximize the window, and it should become visible.
There seems to be a problem on the linux platform which needs to be addressed by the dev team. The best way to have this fixed quickly is to create a bug report on http://bugs.mysql.com. Give it a high severity.
I can't figure out how to install the Doxygen GUI (doxywizard) on Ubuntu. Where can I get it?
In Debian the package is called doxygen-gui. It must be the same in Ubuntu, so try sudo apt-get install doxygen-gui.
Edit : apparently, doxygen-gui doesn't exist in Karmic. Try any other repo ? http://packages.ubuntu.com/search?keywords=doxygen-gui
apt-file search doxywizard
is a good way to answer this type of question, and leads directly to doxygen-gui.
I installed the older package from Jaunty on Karmic. I believe it was from this link: http://packages.ubuntu.com/en/jaunty/doxygen-gui YMMV.
Yes, and from what I've read it will become available again in Ubuntu Lucid Lynx , 10.04
(see: https://launchpad.net/ubuntu/+source/doxygen/1.6.2-0ubuntu1 )
Downloaded .deb-file from :
https:// launchpad.net/ubuntu/lucid/i386/doxygen-gui/1.6.2-1
But that needs some libqt4-xml version higher then the jaunty jackalope 9.10 repository .
Guess we'll have to wait a bit .
if you use eclipse there is a plugin called eclox which would do the trick.
(tested it in ubuntu 9.04)