In my source block I want to be the amount of agents based on two different factors namely the amount of beds and visitors per bed. The visitors per bed is just a variable (e.g. visitors=3) and the amount of beds is loaded from the database table which is an excel file (see first image). Now I want to code this in the code block as shown in the example in image 2, but I do not know the correct code and do not know if it is even possible.
Simplest solution is just to do the pre-calcs in the input file and have in the dbase.
The more complex solution is to set the Source arrivals as:
Now, you read your dbase code at the start of the model using SQL (i.e. the query constructor). Make the necessary computations and create a Dynamic Event for each arrival when you want it to happen, relative to the model start. Each dynamic event then calls the source.inject(1) method.
Better still is to not use Source at all but a simple Enter block. The dynamic event creates the agent with all relevant properties from your dbase and pushes it into the Enter block using enter.take(myNewAgent)
But as I said: this is not trivial
Related
In my model I only want to batch agent which are at the same location. So my source block generates the agents according to a database to a specific node (which is sometimes different for agents), now I want the agents that occur at the same node to batch in sizes of 2 and the one that are left over need to be batched alone.
How can I model this, I know that I can use the selectoutput (which says for example if location=node1 use this output etc) option, but do I than have to add for example manually 100 outputs if I've 100 different locations where the agents start or is there a more simple solution for this problem?
Added later:
Or is there another way to model my idea:
So I'm simulating an hospital environment, where logistic employees (in this case the transporter) based on predefined times collects the thrash on certain areas for example the databaserow I show in the picture below:
At 9:50, the thrash at thrash collection point at LAB_Office_2_H_T_N can be collected by the logistic employee.
So in my model I create this 2 agents (which are 2 containers, last column) based on this time and seize a transporter to collect this thrash. Since a logistic employee is able to collect 2 thrash in one time I want to batch it and let the logistic employee collect 2 thrash containers at once.
After that he transports it to the thrash dump area and is released.
The colors changed after the added information. You can use pickup and dropoff blocks instead. You can define your node requirements in the condition cell. You can use local variables like container and agent to code whatever you want. Or use "Quantity (if available)" option. There you can programmatically define how many units will be picked up by using your own function.
Dear Anylogic Community,
I am struggling with finding the right approach for storing my simulation results. I have datasets created that keep track of every value I am interested in. They live in Main (see below)
My aim is to do a parameter variation experiment. In every run, I change the value for p_nDrones (see below)
After the experiment, I would like to store all the datasets in one excel sheet.
However, when I do the parameter variation experiment and afterwards check the log of the dataset (datasets_log), the changed values do not even show up (2 is the value I did set up in the normal simulation).
Now my question. Do I need to create another type of dataset if I want to track the values that are produced in the experiments? Why are they not stored after executing the experiment?
I really would appreciate if someone could share the best way to set up this export of experiment results. I would like to store the whole time series for every dataset.
Thank you!
Best option would be to write the outputs to some external file at the end of each model run.
If you want to use Excel, which I personally would not advise, even though it has a nice excelFile.writeDataSet() function, you can.
I would rather write the data to a text file as you will have much for control over the writing, the file itself, it is thread-safe, and useable in many many more platforms than Microsoft Excel.
See my example below:
Setup parameters in your model that you will write the data to at the end of the model of type TextFile. Here I used the model on destroy code to write out the data from the data sets.
Here you can immediately see the benefit of using the text file! You can add the number of drones we are simulating (or scenario name or any other parameter) in a column, whereas with Excel this would be a pain...
Now you can pass your specific text file to the model to use by adding it to the parameter variation page, providing it to the model through the parameters.
You will see that I also set up some headers for the text file in the Initial Experiment setup part, and then at the very end of the experiment, I close the text files in the After experiment section so that the text files can be used.
Here is the result if you simply right-click on the text files and open them in Excel. (Excel will always have a purpose, even if it is just to open text files ;-) )
for an analysis of a production process, I want to spawn agents in my source block according to past real data.
For that, I want to use an arrival table to make sure that the agents spawn at the correct time.
But I also need to give my agents different parameter variations.
For that, I want to use the "Set agent parameters from DB" checkmark.
However, it seems that I can't use both of them combined. Is there a way to use an arrival table and a parameter DB combined?
Thanks a lot in advance.
Yes, you can. You need to use a single table for all the information regarding the agent.
See the example table below
You also need to create a customer agent for your source with parameters you want to populate from the DB
Then in the source you can select to generate this agent at the "new Agent" dropdown. Then you will be able to populate all the agent parameters from table you specified
I am using Anylogic for a simulation-modeling class, and I am not anylogic or coding smart. My last and only coding class was MatLab based about 16 yrs ago. I have a few questions about how to implement modeling concepts in a discrete model with anylogic.
How can I add/inject agents directly into a queue downstream from a source? I have tried adding an additional source to use the “Calls of inject() function,” but I am not sure how to implement it after selecting it ( example: what do I do after selecting the Calls of inject() function). I have the new source feeding directly into the queue where I want the inject.
How can I set the release of an agent to a defined schedule instead of a rate? Currently, I have my working model set to interarrival time. But I would like to set the agent release to a defined schedule. (example: agent-1 released at 120 seconds, agent-2 released at 150 seconds, agent-3 released at 270 seconds)
Any help would be greatly appreciated, especially if it can be written in a “explain to me like I am 5yrs old” format.
Question 1:
If you have a source connected directly to a queue, then when you call source.inject() an agent will be created at the source block and go to the queue. If you have 1 source with multiple possible destinations, then you will have to use select output blocks and some criteria to go from the source to the desired queue.
Since you mentioned not being a strong programmer, this probably wouldn't be for you, but I often find myself creating agents via add_population and then just adding them to an ArrayList until I am ready to pull them into the DES flow. Really, there are near infinite ways to control agent flow within AnyLogic.
Question 2:
Option a: Arrivals by "Arrival Table in Database" You can link an AnyLogic database table to Excel, and then the source block will just have an agent arrive based on that table.
Option b: Arrival Schedule - you could set this up manually within the development environment or load your schedule from a database. I prefer option a over option b given your brief description.
Option c: Read in data to variable and then write code to release based on next arrival time. 1,000s of ways to do this, but one example could be a list of doubles (your arrival times), set an event to delay until next arrival, call inject function, remove that arrival from the list. I think option a would be best for you, but given that AnyLogic allows you to add java code, there are no limits to how sophisticated you could make your arrival logic.
For 2) You could also use an event or a dynamic event. The action could be source.inject(1); and you can schedule them to your preferences with variables. Just be vigilant that you re-start the events if necessary.
There is a demo-model from AnyLogic for dynamic events.
I have a stock agent which is created in the end of my production line. My products are characterized by their model. I'm trying to create a logic to take out the products from this stock agent when they are to be delivered to the client. This delivery is controlled by an excel sheet and I'm taking the information through a SQL code. However, I was not able to find the right code to take out the products which are to be delivered. My agent population is called ProdutoStock and it's located in my main screen.
I have tried: Main.remove_ProdutoStock() but i couldn't figure out the arguments that i need for this function, since i have to take out of the agent a specific number of agents and also of a specific model.
So, I decided to create a wait block and use the free function to free the specific agents i wanted main.waiting_delivery.free() but i also can't figure out the necessary arguments for this function.
Would someone have any idea how I can take out of my agent/line the products that I need to deliver for my client (considering quality and also model)? This code is not being typed into my main screen.
the argument of the free method is the agent itself.
So you have to do main.waiting_delivery.free(yourAgent);
If you want to free the last agent that entered the wait block:
if(main.waiting_delivery.size()>0)
main.waiting_delivery.free(main.waiting_delivery.get(0));
If you want to free agents following a certain condition
List <YourAgent> theAgents=findAll(main.yourAgentPopulation,a->a.condition==true);
for(YourAgent a : theAgents){
main.waiting_delivery.free(a);
}