We use Kafka, Kafka connect and Schema-registry in our stack. Version is 2.8.1(Confluent 6.2.1).
We use Kafka connect's configs(key.converter and value.converter) with value: io.confluent.connect.avro.AvroConverter.
It registers a new schema for topics automatically. But there's an issue, AvroConverter doesn't specify subject-level compatibility for a new schema
and the error appears when we are trying to get config for the schema via REST API /config: Subject 'schema-value' does not have subject-level compatibility configured
If we specify the request parameter defaultToGlobal then global compatibility is returned. But it doesn't work for us because we cannot specify it in the request. We are using 3rd party UI: AKHQ.
How can I specify subject-level compatibility when registering a new schema via AvroConverter?
Last I checked, the only properties that can be provided to any of the Avro serializer configs that affect the Registry HTTP client are the url, whether to auto-register, and whether to use the latest schema version.
There's no property (or even method call) that sets either the subject level or global config during schema registration
You're welcome to check out the source code to verify this
But it doesn't work for us because we cannot specify it in the request. We are using 3rd party UI: AKHQ
Doesn't sound like a Connect problem. Create a PR for AKHQ project to fix the request
As of 2021-10-26, I used akhq 0.18.0 jar and confluent-6.2.0, the schema registry in akhq is working fine.
Note: I also used confluent-6.2.1, seeing exactly the same error. So, you may want to switch back to 6.2.0 to give a try.
P.S: using all only for my local dev env, VirtualBox, Ubuntu.
#OneCricketeer is correct.
There is no possibility to specify subject-level compatibility in AvroConverter unfortunately.
I see only two solutions:
Override AvroConverter to add property and functionality to send an additional request to API /config/{subject} after registering the schema.
Contribute to AKHQ to support defaultToGlobal parameter. But in this case, we also need to backport schema-registry RestClient. Github issue
The second solution is more preferable till the user would specify the compatibility level in the settings of the converter. Without this setting in the native AvroConverter, we have to use the custom converter for every client who writes a schema. And it makes a lot of effort.
For me, it looks strange why the client cannot set up the compatibility at the moment of registering the schema and has to use a different request for it.
I just started using Postman. I had this error "Error: socket hang up" when I was executing a collection runner. I've read a few post regarding socket hang up and it mention about sending a request and there's no response from the server side and probably timeout. How do I extend the length of time of the request in Postman Collection Runner?
For me it was because my application was switched to https and my postman requests still had http in them. Changing postman to https fixed it.
Socket hang up, error is port related error. I am sharing my experience. When you use same port for connecting database, which port is already in use for other service, then "Socket Hang up" error comes out.
eg:- port 6455 is dedicated port for some other service or connection. You cannot use same port (6455) for making a database connection on same server.
Sometimes, this error rises when a client waits for a response for a very long time. This can be resolved using the 202 (Accepted) Http code. This basically means that you will tell the server to start the job you want it to do, and then, every some-time-period check if it has finished the job.
If you are the one who wrote the server, this is relatively easy to implement. If not, check the documentation of the server you're using.
Postman was giving "Could not get response" "Error: socket hang up".
I solved this problem by adding the Content-Length http header to my request
Are you using nodemon, or some other file-watcher? In my case, I was generating some local files, uploading them, then sending the URL back to my user. Unfortunately nodemon would see the "changes" to the project, and trigger a restart before a response was sent. I ignored the build directories from my file-watcher and solved this issue.
Here is the Nodemon readme on ignoring files: https://github.com/remy/nodemon#ignoring-files
I have just faced the same problem and I fixed it by close my VPN. So I guess that's a network agent problem. You can check if you have some network proxy is on.
this happaned when client wait for response for long time
try to sync your API requests from postman
then make login post and your are done
I defined Authenticate method to generate a token and mentioned its return type as nullable string as:
public string? Authenticate(string username, string password)
{
if(!users.Any(u => u.Key==username && u.Value == password))
{
return null;
}
var tokenHandler = new JwtSecurityTokenHandler();
var tokenKey = Encoding.ASCII.GetBytes(key);
var tokenDescriptor = new SecurityTokenDescriptor()
{
Subject = new ClaimsIdentity(new Claim[]
{
new Claim(ClaimTypes.Name, username)
}),
Expires = DateTime.UtcNow.AddHours(1),
SigningCredentials = new SigningCredentials(new
SymmetricSecurityKey(tokenKey),
SecurityAlgorithms.HmacSha256Signature)
};
var token = tokenHandler.CreateToken(tokenDescriptor);
return tokenHandler.WriteToken(token);
}
Changing nullable string to simply string fixed "Socket Hang Up" issue for me!
If Postman doesn't get response within a specified time it will throw the error "socket hang up".
I was doing something like below to achieve 60 minutes of delay between each scenario in a collection:
get https://postman-echo.com/delay/10
pre request script :-
setTimeout(function(){}, [50000]);
I reduced time duration to 30 seconds:
setTimeout(function(){}, [20000]);
After that I stopped getting this error.
I solved this problem with disconnection my vpn. you should check if there is vpn connected.
What helped for me was replacing 'localhost' in the url to http://127.0.0.1 or whatever other address your local machine has assigned localhost to.
Socket hang up error could be due to the wrong URL of the API you are trying to access in the postman. please check the URL once carefully.
It's possible there are 2 things, happening at the same time.
The url contains a port which is not commonly used AND
you are using a VPN or proxy that does not support that port.
I had this problem. My server port was 45860 and I was using pSiphon anti-filter VPN. In that condition my Postman reported "connection hang-up" only when server's reply was an error with status codes bigger than 0. (It was fine when some text was returning from server with no error code.)
When I changed my web service port to 8080 on my server, WOW, it worked! even though pSiphon VPN was connected.
Following on Abhay's answer: double check the scheme. A server that is secured may disconnect if you call an https endpoint with http.
This happened to me while debugging an ASP.NET Core API running on localhost using the local cert. Took me a while to figure out since it was inside a Postman environment and also it was a Monday.
In my case, adding in the header the "Content-length" parameter did the job.
My environment is
Mac:
[Terminal command: sw_vers]
ProductName: macOS
ProductVersion: 12.0.1. (Monterey)
BuildVersion: 21A559
mysql:
[Terminal command: mysql --version]
Ver 8.0.27 for macos11.6 on x86_64 (Homebrew)
Apache:
[Terminal command: httpd -v]
Server version: Apache/2.4.48 (Unix)
Server built: Oct 1 2021 20:08:18.
*Laravel
[Terminal command: php artisan --version]
Laravel Framework 8.76.2
Postman
Version 9.1.5 (9.1.5)
socket hang up error can also occur due to backend API handling logic.
For example - I was trying to create an Nginx config file and restart the service by using the incoming API request body. This resulted in temporary disconnection of the Nginx service while handling the API request and resulted in socket hang up.
If you have tried all the steps mentioned in other comments, and still face the issue. I suggest you check the API handler code thoroughly.
I handled the above-mentioned example by calling the Nginx reset method with delay and a separate API to check the status of the prev reset request.
For me it was giving Socket Hung Up error only while running Collection Runner not with single request.
Adding a small delay (100-300ms) in the collection Runner solved issue for me.
In my case, I had to provide --ssl-client-key and --ssl-client-cert files to overcome these errors.
Great error, it is so general that for everyone something different helps.
In my case I was not able to fix it and what is really funny is fact that I am expecting to get multipart file on one endpoint. When I prepare request in postman I get "Error: socket hang up". If I change for other endpoint(even not existing) is exactly that same error. But when I call any endpoint without body that request works and after that all subsequent attempts works perfectly.
In my case this is purely postman issue. Any request using curl is never giving that error.
For me the issue was related to the mismatch of the http versions on the client and server.
Client was assuming http v2 while server (spring boot/ tomcat) in the case was http v1
When on the server I configured server to v2, the issue got resolved in a go.
In spring boot you can configure the http v2 as below:-
server.http2.enabled=true
Note - Also the scenario was related to using client auth mechanism (i.e. MTLS)
Without client auth/ MTLS it worked without issues but for client auth the version setting in spring boot was the important rescue point
"socket hang up" is proxy related issue. when we run same collection with the help of newman on jenkins then all test are passed.
change the proxy setting
https://docs.cloudfoundry.org/cf-cli/http-proxy.html
I had the same issue: "Error: socket hang up" when sending a request to store a file and backend logs mentioned a timeout as you described. In my case I was using mongoDB and the real problem was my collection’s array capacity was full. When I cleared the documents in that collection the error was dismissed. Hope this will help someone who faces a similar scenario.
"Socket Hung Up" can be on-premise issue some time's, because, of bottle neck in %temp% folder, try to free up the "temp" folder and give a try
I fixed this issue by disabling Postman token header. Screenshot:
I face the same issue in when calling a SOAP API with POSTMAN
by adding the following data in the header my issue was fixed
Key:Content-Length
Value:<calculated when request is sent>
In my case, I was incorrectly using a port reserved for https version of my api.
For example, I was supposed to use https://localhost:6211, but I was using http://localhost:6211.
It is port related error. I was trying to hit the API with an invalid port.
if it helps to anybody... In my case, i just forgot to use json parser (const jsonParser = express.json();) to have access to json type of objects sending to the server from the client. Be careful, don't waste your time =)
This happened to me while I was learning ASP.NET Web API.
In my case it was because the SSL certificate verification.
I was using VS Code so I oversee about SSL certificate verification and it came with https protocol.
I solved this with testing my endpoints with http protocol.
Another approach can be just disabling the SSL certificate Verification on Postman Settings.
This error was coming for me since the request url is not correct --> here you can see my url does not contains : after http
The url I was using was : http//locahost:9090/someApi
Solution
adding a colon new url is http://localhost:9090/someApi
the socket error was not coming
This is just my case may be your case is totally different as mentioned in the other answers :)
I am trying to use the ElasticSearch module (https://github.com/cleverage/play2-elasticsearch) with my Play 2 application. In the readme, it says I should add the following to my application.conf:
## define local mode or not
elasticsearch.local=false
## list clients
elasticsearch.client="192.168.0.46:9300"
# ex : elasticsearch.client="192.168.0.46:9300,192.168.0.47:9300"
What is local mode? What is my client URL supposed to be? I can not find any information on what these options should be. With my current options, I get a NoNodeAvailableException.
Some people suggest:
elasticsearch.local=false elasticsearch.client=mynode1:9200,mynode2:9200
But what is mynode1 and mynode2? It doesn't work with my application. Can anyone help? Thanks
What is local mode?
If elaticsearch.local=true, a elasticsearch node is started in your application ( embedded )
What is my client URL supposed to be?
It's your host:port, but the port is the tcp transport define on your elasticsearch node.
By default, the port start on 9300 ( http://www.elasticsearch.org/guide/reference/modules/transport.html )
I can not find any information on what these options should be. With my current options, I get a NoNodeAvailableException.
I think you have a problem on port number.
mynode1 and mynode2 are elasticsearch nodes.
Do you have any Elasticsearch node running?
On which IP address?
Can you try to connect on these nodes using curl, for example:
curl localhost:9200
Or
curl YOURIPADDRESS:9200
If one of this is successful, then configure your play app using YOURIPADDRESS:9300 as Nicolas Boire wrote before.
If no one is successful, check that you have installed Elasticsearch and launched it before.
HTH
I've just had the same problem, be sure that you respect the version requirements written in the table : https://github.com/cleverage/play2-elasticsearch
At the beginning, I set up the latest version of the plugin 0.8.1 but my ElasticSearch version was 1.0.2.
By starting ES with version 0.9.13, it worked.