I installed Keycloak 17.0.0 but not able to create admin user. I followed this document.
When I access Keycloak page, it is showing "you need local access to create the initial admin user". Screenshot is here - Keycloak. Also I didn't find the add-user-keycloak script in Keycloak 17.0.0. I am quite new to this. Can anyone help on how to create the initial admin user?
Thanks in advance.
I to have been trying to play around with Keycloak 17, and have found it far from easy to get it to work as I expected.
I am trying to get it work on remote server,where its impossible to login on localhost. To create the admin user I followed the information in the Keycloak document at KeyCloak documents, see the section called Creating the first administrator
You set the following envronmental variables
export KEYCLOAK_ADMIN='username'
export KEYCLOAK_ADMIN_PASSWORD='password'
bin/kc.[sh|bat] start
Were username and password are strings for username and password.
Another problem I had was getting Keycloak to work on my server haggis on port 8085. My solution was to invoke it as follows.
./kc.sh start-dev --http-port=8085 --http-host=haggis --db-url-host=haggis --db-username=kc --hostname=haggis:8085 --hostname-admin=haggis:8085 --hostname-strict-backchannel=true --db-url-database=postgresql --db-username='kcuser'
This command line instructs Keycloak to start up on the server haggis, at port 8085, using a postgres database with a database user called kcuser in development mode.
My largest problem was working out that you had to include the port number in the hostname style arguments.
Once everything is working you can invoke it as
http://haggis:8085/admin/master/console/#/realms/master
Ok, someone far cleverer than I figured this out:
export KEYCLOAK_ADMIN=admin
export KEYCLOAK_ADMIN_PASSWORD=admin
sudo -E bin/kc.sh start-dev
https://github.com/keycloak/keycloak/discussions/10262
But don't use admin/admin of course...
Related
I have a fresh install of a database on AWS. I have installed PG Admin 4 for Web and set up for a user login. This works.
I find it is not possible to connect to the localhost database using 'postgres' as a user, without a password. This appears to be enforced by the dialog. Is there a way around this enforcement? How would a user only having web access ALTER this ROLE? I would expect this to be relaxed for the initial login.
The database is local to the webserver and the web server is remote for the user.
TL:DR This logon is not a peer logon as the postgres *nix user.
It's a gap in the install. A manual step will always be required to add a password for postgres for anyone wanting to use the interface for initial USER/ROLE creation. It would be nice to have had this opportunity in the setup script.
I suppose it is expected that most administrators would also add other users/roles at this time and these would be supplied to the users. Changes to config files would still be managed. They are not getting shell access.
Here is the database I am trying to install (comes with 4 short instructions very easy to follow): https://github.com/toddwschneider/nyc-taxi-data
I used git clone to bring the repository down to my vm. And next I cd into it and run initialize_database.sh. Here is what happens:
pic of terminal
the password I am trying to use is the one provided by my Bitnami Launchpad, which says the admin user is postgres, but when I work on it it says kzherbert, my google account. I have tried su postgres but its not a user on the server so it doesnt work like that. I can use postgres password for psql -U postgres, which will take me to the psql terminal. Also, I have tried using my google account password as well and it does not work. What really interests me about the picture is where the shapefile is relevant and why it repeats and doesnt allow me to exit
Any and all help is greatly appreciated.
The problem is that the database you are trying to install (Unified New York City Taxi and Uber data) assumes you're installing PostreSQl from scratch instead of using the one included in the Bitnami Image.
The script you're using assumes that the user to connect the database is the same that the System User you're using to connect to your server via SSH (kzherbert in your case). However, the password you're trying to use is the one for the user postgres.
You need to connect to PG using the password Google provided you and the user postgres and the create an user kzherbert with the password you desire.
I have installed Foreman via foreman-installer (that pack included Postgres DB 9.5). Now i want to create new user + new database for Zabbix, however it seems that i am doing something wrong. The image shows what commands i typed. The new user is created succesfully but i can't login as it to database. Could someone help me and explain where is the problem?
EDIT: I've added option that was suggested in another thread (WITH LOGIN) but it didn't help me:
I believe the answer is here.
In summary, "peer authentication" means postgres checked the username of the UNIX user (which is not zabbix), and ignored your -U option. Instead, you want to use "password authentication", which you can configure in your pg_hba.conf file. Check the link for instructions how to do that.
I installed for the first time on my OS X CKAN (And is possible ive made some mistake). Now i want to play with the UI backend but when I go in "login" section it ask me for User/password
I'm using my postgres user and user's password for access it but it give me error.
If I list the db I can see my user there but when I login it say "user doesn't exist"
So which one is the CKAN Systemadmin access?
Reading in the docs it just say, you shoudl have create this user during installation process
you can run this paster command to create a sysadmin user:
paster --plugin=ckan sysadmin add <username> --config=/etc/ckan/development.ini
For more, see http://docs.ckan.org/en/latest/maintaining/paster.html
How can I reset the ATG Dynamo Admin password?
I need steps to reset/change the password, from the default of admin/admin.
According to Oracle's documentation, you can add Admin.Reset to your ear file which when deployed, will reset the admin password to the admin account.
ATG Documentation
Delete entry for "admin" from DAS_ACCOUNT table and restart the server. Then open dyn admin with admin/admin. It will take you to passward reset page.
You can do this ACC. In ACC click on People and Organizations->Control center users and select the name whose password you want to change.
It is answered in This forum. Basically, there are different ways to reset password, you can do it either by firing some queries or by methods mentioned here.
I had similar issue. In WebLogic app server I was getting denied ATG Dyn Admin of admin/admin. I took a shot in the dark and tried my WebLogic admin console login, and this time it worked, but Dyn Admin tried to take me to a password reset page. At that time I got the error:
Make sure that you have the bin directory for your JDK in your PATH variable before starting Dynamo and that you have enough swap space.
I created below props file in ATG_HOME/localconfig, and added the one liner below:
/atg/dynamo/servlet/pagecompile/ExtendedJhtmlPageProcessor
javaCompilerClassName=atg.servlet.pagecompile.SunJavaSourceCompiler
This solved my problem. I was able to load password change JHTML fine. Not sure yet why ATG Dyn Admin was redirecting me to password change page, and why it accepted my WebLogic console credentials. I wonder if it's a WebLogic specific thing.
you can change your password through /dyn/admin console there is a link password management from where you can reset the default password from admin/admin
Open your SQL developer in Core schema there is table name DAS_ACCOUNT where account name and password has been set so for password there is a long key
i have a key with me
2b7b1f41d6ddb810d48096c266d3bd092d7e5da5
place it in there now your
username:admin
Password:admin123