I had written a script that would compare the block height from local waves node and a remote waves node.
For some reason, it started at around 10 March 2022 at 10pm NZDT, the result that I'm getting from querying nodes.wavesnode.com block height is behind by at least 300-400(approximately). This appears to happen intermittently.
Anyone else having this issue? Or know of how to fix it?
I've sent a message to discord channel for waves, but not received any replies.
To prove that the issue is not the script, ive tried to visit the website:
https://nodes.wavesnodes.com/blocks/height
The result for most of the time appears to be correct, but from time-to-time, it would be way below than what the correct block height is supposed to be.
Related
I am currently working on a parking place simulation. Before entering the parking place, a car has to cross a border. To simulate that, I added a "carMoveToBorder" block, where the car moves to a stopline. Then I added a service block to simulate the time getting served by the borderService. Now that I am having a car network, I dont really know how to specify the location of the delay or the queue inside the service block. I tried specifying the location of the delay by entering the name of the stopLine but I got an error message saying: Type mismatch: cannot convert from Agent to AnimationStaticLocationProvider
Pictures are below.
Help is appreciated.
Thank you for your time.
borderServicePicture1
borderServicePicture2
why dont you try to use Delay instead of Service. One of the difference between them is that Service has embedded queue. But maybe in your case the car will never use that queue, i mean if its right in front of border but not quite there, it means its still in CarMoveToBorder block. And i guess in Delay you just dont have to set any agent location. (btw, what happens if you leave agent location blank in Service?)
I'm trying to filter a signal and then analyse the values of the filtered signal using Tone.js / Web-Audio API.
I'm expecting to get values of the filtered signal, but I only get -Infinity, meaning that my connections between the nodes are wrong. I've made a small fiddle demonstrating this, however in my use-case I do not want to send this node to the destination of the context - I only want to analyse it, not hear it.
osc.connect(filter)
filter.connect(gainNode)
gainNode.connect(meter)
console.log(meter.getLevel())
I guess you tested the code in Chrome because there is a problem with Chrome which causes it to not process anything until it is connected to the destination. When using Tone.js that means you need to call .toMaster() at the end of your chain. I updated you fiddle to make it work: https://jsfiddle.net/8f7abzoL/.
In Firefox calling .toMaster() is not necessary therefore the following works in Firefox as well: https://jsfiddle.net/yrjgfdtz/.
After some digging I've found out that I need to have a scriptProcessorNode - which is apparently no longer recommended - so looking into Audio Worklet Nodes
I'm trying to create an agent statechart where a transition should happen every day at 4 pm (except weekends).
I have already tried:
1. a conditional transition (condition: getHourOfDay() == 16)
2: A timeout transition that will "reinsert" my agent into the chart every 1 s and check if time = 16.
My code is still not running, does anyone have any idea how to solve it?
This is my statechart view. Customer is a single resource that is supposed to "get" the products out of my stock everyday at 4pm. It is supposed to happen in the "Active" state.
I have set a timeout transition (from Active-Active) that runs every 1s.
Inside my "Active" state in the "entrance action" i wrote my code to check if it is 4 pm and run my action if so.
I thought since i set a timeout transition it would check my condition every 1s, but apparently it is not working.
Your agent does not enter the Active state via an internal transition.
Redraw the transition to actually go out of the Active state and then enter it again as below:
Don't use condition-based transitions, for performance reasons. In your case, it also never triggers because it is only evaluated when something happens in the model. Incidentally, that is not the case at 4pm.
re your timeout approach: Why would you "reinsert" your agent into its own statechart? Not sure I understand...
Why not set up a schedule or event with your recurrence requirement and make it send a message to the statechart: stateChart.fireEvent("trigger!");. In your statechart, add a message-based transition that waits for this message. This will work.
Be careful to understand the difference between the Statechart.fireEvent() and the Statechart.receiveMessage() functions, though.
PS: and agree with Felipe: please start using SOF the way it is meant, i.e. also mark replies as solved. It helps us but also future users to quickly find solutions :-) cheers
I did some research into this and couldn't really find anything, so if this is a repetitive question I apologize. but anyway I have made a CCB file in CocosBuilder and I would like to start the timeline, for example, at one second instead of playing from the beginning. Is there a way to do this? Thanks for the help guys.
Edit: i would like this to be done in the code.
I am using 2.2.1 Cocos2DX version. I think there is no option to play it from given interval. But you can tweak yourself to get it done. (Not simple one)
You have to go to CCBAnimationManager and there you get "mNodeSequences".
It is dictionary and you get difference properties there like "rotation position etc..."
values there.
Internally AnimationManager reads this value (These values are specified in your CCB)
and puts in runAction queue.
So you have to break it as you want.(Ex. 5 min timeline you have. But you want to start
from 1 min then you have run first 1 min Actions without delay and for remaining you
have properly calculate tween intervals.
It's long procedure and needs calculation. If you don't know any other simpler way try this. If you know pls let us know (Post it).
When I create a new quote from Epicor I would like to add an item from the parts form automatically.
I am trying to do this using the following ABL code which runs when 'GetNewQuoteHed' is called:
run Update.
run GetNewQuoteDtl.
run ChangePartNumMaster("Rod Tube").
ttQuoteDtl.OrderQty = 5.
run Update.
I am getting the error:
Index -1 is either negative or above rows count.
This error occurs for each line in my ABL code.
What am I doing wrong?
That's not the proper format for a 4GL error message (nor is it at all familiar) so I'd say it is an Epicor application message. Epicor support is probably your best bet. However... Just guessing but it sounds like you might need to somehow initialize the thing that you're updating.
Agree with #Tom, but i would also say try and isolate the error and see where the error is raised as soon as you find the point the error is actually raised it is normally much easier to figure out exactly what is going wrong and how to solve it.
Working between a 0 based and a 1 based system there can be issues with the 1st or last entry depending on which way you moving. As the index for 0 based systems starts at 0 and ends at n-1 where 1 based systems start at 1 and end at n.