I did some research into this and couldn't really find anything, so if this is a repetitive question I apologize. but anyway I have made a CCB file in CocosBuilder and I would like to start the timeline, for example, at one second instead of playing from the beginning. Is there a way to do this? Thanks for the help guys.
Edit: i would like this to be done in the code.
I am using 2.2.1 Cocos2DX version. I think there is no option to play it from given interval. But you can tweak yourself to get it done. (Not simple one)
You have to go to CCBAnimationManager and there you get "mNodeSequences".
It is dictionary and you get difference properties there like "rotation position etc..."
values there.
Internally AnimationManager reads this value (These values are specified in your CCB)
and puts in runAction queue.
So you have to break it as you want.(Ex. 5 min timeline you have. But you want to start
from 1 min then you have run first 1 min Actions without delay and for remaining you
have properly calculate tween intervals.
It's long procedure and needs calculation. If you don't know any other simpler way try this. If you know pls let us know (Post it).
Related
Let's say I have 3 pairs of pickup and delivery(6 nodes), and their own time windows.
0-Node_start #Index(0)
1-Pickup, 2-Delivery #Index(1,2)
3-Pickup, 4-Delivery #Index(3,4)
5-Pickup, 6-Delivery #Index(5,6)
7-Node_end #Index(7)
How can I force my vehicle to go from node start to index_3, then continue with the rest of the route directly without changing the time window of a node in index_3, or changing the traveling time to 0 from node_0 to node_3? This should be possible regardless of the time taken from index_0 to index_3, as long as time windows allow.
Also, not sure if this is important in this case, but I use FirstSolutionStrategy.GLOBAL_CHEAPEST_ARC
I have found a solution that works for my case, hopeful it will work for others too. I used NextVar
consecutive_locations = [[1,3], [7,9]]
for location_index in consecutive_locations:
routing.solver().Add(routing.NextVar(location_index[0]) == location_index[1])
I used a loop because I have multiple vehicles, each vehicle has a specific starting point, and a location I want it to visit next after starting point.
The solution takes longer though, I think firstSolutionStrategy might be the issue(Not sure)
I need to use "Count Day" code for indicator.
It does work fine, but this indicator keeps previous day object till I restart MT4.
What is wrong below code?
if(day >= drowDays) {
break;}
Also you can see chart screenshot link.
You're not providing sufficient information to your problem :'(
With the limited info, what I can say is that you need to delete the graphical objects created for previous day.
Assuming your indicator will plot the latest line, then you MIGHT (again, this is a guess as there is not enough information of your code) be able to achieve it with the ObjectsDeleteAll() function at the start of your OnCalculate(). Obviously, this is not efficient, but is something you can think about.
When I create a new quote from Epicor I would like to add an item from the parts form automatically.
I am trying to do this using the following ABL code which runs when 'GetNewQuoteHed' is called:
run Update.
run GetNewQuoteDtl.
run ChangePartNumMaster("Rod Tube").
ttQuoteDtl.OrderQty = 5.
run Update.
I am getting the error:
Index -1 is either negative or above rows count.
This error occurs for each line in my ABL code.
What am I doing wrong?
That's not the proper format for a 4GL error message (nor is it at all familiar) so I'd say it is an Epicor application message. Epicor support is probably your best bet. However... Just guessing but it sounds like you might need to somehow initialize the thing that you're updating.
Agree with #Tom, but i would also say try and isolate the error and see where the error is raised as soon as you find the point the error is actually raised it is normally much easier to figure out exactly what is going wrong and how to solve it.
Working between a 0 based and a 1 based system there can be issues with the 1st or last entry depending on which way you moving. As the index for 0 based systems starts at 0 and ends at n-1 where 1 based systems start at 1 and end at n.
Anyone know if there's a way to generate URL's for SoundCloud tracks that specify a start time for the song? I'm looking for a way to force playback of streams at a certain time in the stream without having to do any processing on my end via the API.
As #bsz correctly noticed, we have released a way of specifying start time on the sound when linking to it, append #t=12s to the sound's URL to start it at 12th second, etc.
If the audio is long enough, you can use (e.g.) #t=2h10m12s.
They seem to have added a #t option but not sure if you can also give an stop time:
https://soundcloud.com/razhavaniazha-com/06-06-2013-razhavaniazha-afn#t=54:00
You can also specify a start time one minute or over by appending
#XmXs
If you want a time right on the minute mark (e.g. 3:00), include 0 seconds (0s) in the time code (i.e. 3m0s), or else the start time will be ignored. It does not appear to support a start time over an hour.
Click share and set or pick time
I am new to iPhone programming so am hoping someone can help me out here. I have searched the web, but can only find information on count down timers.
What I am looking to do is start a count up timer when a button is pressed and then stop it when a certain value drops by, say 5, and finally display that time. I can display values on screen once I have them, but getting the time in the first place is proving difficult for me.
I apologize if this is a simple question, but I look forward to reading your responses.
Thanks in advance,
stu
NSDate will provide the current date. You can use - (NSTimeInterval)timeIntervalSinceNow
to get the time since the first call and now.
There's no difference between an up-counter and down-counter. Just change the order of your subtraction.
UpcounterElapsedTime = UpcounterCurrentTime - UpcounterStartTime;
DowncounterElapsedTime = DownCounterStartTime - DownCounterCurrentTime;