I am trying to launch a Binder rep and import JupyterDash into it.
The Binder built worked.
In my Binder rep
enter link description here
My yml is:
name: plotly_dash
channels:
defaults
dependencies:
python
ipykernel
seaborn
pandas
matplotlib
numpy
plotly
jupyter-dash
dash
chart-studio
nbformat
ipywidgets
openpyxl
jupyter_server_proxy
However, I get the message:
jupyterlab-dash needs to be included in built
On my machine locally this is also the case and not a problem and works.
In Binder it throws an error:
If you are experiencing the build failure after installing an extension (or trying to include previously installed extension after updating JupyterLab) please check the extension repository for new installation instructions as many extensions migrated to the prebuilt extensions system which no longer requires rebuilding JupyterLab (but uses a different installation procedure, typically involving a package manager such as 'pip' or 'conda').
If you specifically intended to install a source extension, please run 'jupyter lab build' on the server for full output.
As I see it JupyterDash is not prebuilt.
On
github.com/plotly/jupyter-dash
they say to include:
JupyterDash.infer_jupyter_proxy_config()
This does not work either and to make it work it requires some efforts on the server site, I guess. However I do not even think this would solve the problem.
What can I do to make the built work?
Thank you for any suggestions.
I posted this on Jupyter Discourse Forum too:
enter link description here
Related
I am very new to coding and am trying to write a practice script for webscraping in VS Code Editor. But every time i run the script i get this issue of there being no real output. Can you please advise on what the issue is? Note: the pink boxes are just covering my nameenter image description here
I tried running the code and expected webscraped data from the link. I have tried many different scripts and the same issue happens. So there must be something wrong with the whole system i think
VSCode is an excellent IDE. When you start a new project (or open a folder in VSCode), it does not come with any build tools or compilers etc. You have to manually configure them. You have to set up the environment using different toolchains. Here are some instructions for Python
This is not a problem with VSCode but I am going to answer your question.
You can't webscrape indeed.com with requests and beatiful soup because it has bot protection using cloudflare. If you take a closer look to the response it returns the 403 Forbidden status code instead of 200 OK. You can scrape using a headless browser using selenium.
Here's an example
First install selenium and webdriver_manager
pip install selenium webdriver_manager
from selenium.webdriver import Chrome, ChromeOptions
from selenium.webdriver.common.by import By
from selenium.webdriver.chrome.service import Service
from webdriver_manager.chrome import ChromeDriverManager
# Make sure you are not detected as HeadlessChrome, some sites will refuse access
options = ChromeOptions()
options.add_argument('--disable-blink-features=AutomationControlled')
options.add_experimental_option("excludeSwitches", ["enable-automation"])
options.add_experimental_option('useAutomationExtension', False)
driver = Chrome(options=options, service=Service(
ChromeDriverManager().install()))
# Make sure you are not detected as HeadlessChrome, some sites will refuse access
ua = driver.execute_script("return navigator.userAgent").replace(
"HeadlessChrome", "Chrome")
driver.execute_cdp_cmd("Network.setUserAgentOverride", {
"userAgent": ua})
driver.execute_script(
"Object.defineProperty(navigator,'webdriver',{get:()=>undefined});")
driver.get("https://www.indeed.com/companies/best-Agriculture-companies")
main = driver.find_element(By.ID, "main")
I am a student who has gotten a part time job embedded system programming. I am given a program the company uses, and asked to understand it. This is a working program. Therefore, the project can be built and flashed on ESP32 by the developers with no problem. So, the code and CMake files should have no issues. However, I cannot build the program either with VSCode extension nor with idf.py. In fact, I cannot build esp-idf examples from the official website, either.
Note: I am new to StackOverflow as well as to ESP32, so sorry if I made any mistakes here. If this post is problematic in any way, please inform me.
The error message from the terminal is shown here
I was initially using VSCode on Windows 10 (Windows is not activated). At first, ESP extension was completely failing to start the building process because it could not locate the tools. I was getting "could not be located" errors for all the tools. Below is a list of what I did in this setting:
I had v5.0.0 for esp-idf downloaded from Espressif server. I deleted it and tried v4.3.3 and then I tried to download from Github server. I downloaded the requirements for idf.py scripting environment and completed the settings for it as described by the Espressif's documentation.
I manually set the environment variables for IDF_PATH and PATH for both the user and for the system.
After 2, the initial error was gone. Unfortunately, I had a new error which indicated that ".elf" file for the project output could not be found. I do not exactly recall the error but if it is integral to the problem's solution I can try to replicate this issue.
I tried to delete and reinstall VSCode. I tried running VSCode with admin authority.
I tried changing the IDF_TOOLS_PATH in the VSCode esp-idf extension configurations from ".espressif" to "esp\esp-idf".
At this point, I moved to try to build the project on Ubuntu 22.04.1 LTS:
In Ubuntu, I got the fatal error: esp_event.h: No such file or directory error.
It does not seem to be a common issue and I could not find much about it online.
I followed the Linux setup steps in the documentation. It said that only step 1 (Downloading the prerequisites) was necessary for the VSCode extension.
I decided to try the "master branch" from esp-idf configurations as well. After I downloaded the master branch, the error changed to the current version: 'fatal error: esp_wifi.h: No such file or directory'
I also tried the idf.py in Ubuntu but I got the same error.
Both in Ubuntu and in Windows, the Doctor Command returns nothing. It does not even open the terminal or any window. I am not sure what it should return but some online discussions were asking about its return so I wanted to note it here.
Edit: When I tried the examples on Ubuntu, they actually build just fine. Doctor Command also works with examples.
However, the main code has still issues. Initially, I assumed I made some mistakes with esp-idf configurations. But, perhaps that was not the case.
I had the same problem and ended up editing my project's CMakeLists.txt. When I added "esp_wifi" to the "REQUIRES" list, it worked for me:
idf_component_register(
SRCS "main.c"
INCLUDE_DIRS res
EMBED_FILES res/settings.html
REQUIRES esp_wifi
)
I'm trying to test out a serverless Python Chatbot API in Microsoft Azure, but when I follow online guide https://towardsdatascience.com/creating-a-serverless-python-chatbot-api-in-microsoft-azure-from-scratch-in-9-easy-steps-2f1913fc9581
it gives these error :
Unable to import 'azure.functions' pylint(import-error) [3,1]
Unable to import '__app__modules.library_finder' pylint(import-error) [4,1]
any idea how to resolve this?
Regards
This error is coming from pylint. It seems that the linter is not pointed to the .env and therefore cannot validate the azure package! To solve it, you can try this:
In Visual Studio Code:
Locate the Python version in the status bar and click on it
Select the Azure workspace where your project resides
A list of Python versions show up for you. Pick the one that starts with ./.venv/ (In my case, it is: ./.venv/bin/python)
You might then get a popup saying the Linter pylint is not installed.
Click on Install button to install it and you should be good to go
Hope this helps
I'm working at a visual effects studio in which we use MongoDB/pymongo for our asset management. Our studio is using the SideFX software Houdini.
So far MongoDB has been a pleasure to work with in terms of programming, however whenever we connect to the MongoDB via pymongo from within Houdini, we're getting the following error:
Microsoft Visual C++ Runtime Library - Runtime Error!
Program: C:\houdini\17.5.293\bin\houdini.exe
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.
This error occurs everytime when we import pymongo for the very first time, i.e. in a Python shell within Houdini, which is using Python 2.7. Once we click 'OK' on the error popup (it appears twice after clicking OK for the first time), the error disappears and we're able to connect successfully to the database.
The SideFX support team suggested that pymongo wasn't compiled with Visual Studio 2017, which is the compiler SideFX is using for their software.
Now we've been trying to debug this for a while now to no avail. Here's a rundown of what we tried:
update Windows10 to the latest and greatest
updating pymongo from 3.5.1 to 3.9.0
launching Houdini from different builds (16.5, 17.0, 17.5), we get the error in every version.(We're launching a vanilla Houdini session without any 'PYTHONPATH' or 'PATH' environment variables set)
interestingly enough my colleague imported pymongo into Houdini successfully on his private laptop last night without any errors occurring which leads me to believe that the error might be related to our system settings possibly?
I would love to find out how to get rid of this error message because it is really messing with our current pipeline. Any suggestions/help is welcome and much appreciated.
Please let me know if you need any additional information in order to debug this matter.
Thanks a lot in advance,
Manu
This post here helped me to resolve my issue:
Runtime error R6034 in embedded Python application
What happened is that we have a Python 2.7 install located at C:\Python27 which is being added as an environment variable 'path' in Windows.
Using the Process Explorer, I learned that this folder contains the file 'msvcr90.dll' which is conflicting with Houdini, since Houdini comes with its own Python installation that doesn't contain this dll file.
The solution is simple. When launching Houdini in a custom environment, strip the C:\Python27 from the 'path' environment variable so Houdini only fires up its own Python interpreter.
Is there a way to load a package from an alternative server when Visual Studio Package Manager (NuGet) is responding with a "The remote server returned an error: (503) Server Unavailable" message?
This is an obscure condition that will likely only occur on an "enterprisy" network environment. If these conditions apply you:
you are required to access the Internet via an HTTP proxy server
the HTTP proxy server requires a valid user ID & password (or AD authentication) to allow requests to proceed
you've been messing with cool developer tools that were ported to Windows from a Linux/Unix environment
the new cool tool(s) work after adding the HTTP_PROXY (or possibly HTTPS_PROXY or both) environment variable(s)
you can access the NuGet servers from a browser without getting a 503 error
Then it's likely you broke NuGet by inadvertently invoking this configuration feature. I'm not sure exactly how the environment variable breaks NuGet but I suspect NuGet is detecting & using the http_proxy URL but sending an empty user ID & password which causes the HTTP proxy to reject the request.
Fix: remove the environment variable(s) you added and see if the cool tool can be configured to use an HTTP proxy without them.
Update: Ran into a version of this issue with the NuGet config file referenced in the "this configuration feature" link above. Open this file:
%appdata%\nuget\nuget.config
in your favorite editor. If it contains elements with http_proxy or https_proxy then removing these elements may fix the issue too.
PS: Hopefully I'll get an up vote from Colonel Panic :-)
If you have used the package in the past it is probably in your cache. You can add the local cache as an available package source by going into the Library Package Manager Settings under the Tools menu in Visual Studio. For Visual Studio 2012, choose Tools, Library Package Manager, Package Manager Settings, and then click on Package Sources.
In the Available package sources section, type a name like "Cache" and then in for the source, browse to %LocalAppData%\NuGet\Cache. You may need to use Windows Explorer to translate %LocalAppData%\NuGet\Cache into the full path (usually C:\Users\YourAccountName\AppData\Local\NuGet\Cache).
Once you have the Cache as an available source, you can now use the Package Manager Console (found under the View menu under Other Windows or also under the Tools menu under Library Package Manager).
From the Console (which is a PowerShell window with commandlets for NuGet) you can type "get-help NuGet" to see available commands.
Then using Get-Package, you can get a list of Package ID's. Make sure the "Package source" is set to "Cache" (or whatever you called it) and the Default project is set to the project you need manipulate, both of these are dropdowns located at the top of the Page Manager Console. You can also use the Get-Project to verify you are working against the correct project in your solution.
Finally, you can type Install-Package and when prompted enter the Package ID from the output of the Get-Package commandlet.
i had also this problem, it was becouse of my network.
if you have any blocking on your Internet, (like in companies internet or etc..)
you may not allowed to download the nuget package.
try to download the package in another network, maybe it can help you!
Talbott's answer did not work for me, as my cache was empty. However, if you have used the package in another solution, you can copy the items you want from the "packages" folder in the other solution to a packages folder in your target solution.
If you have no packages installed in the target solution, you may need to add the following to a repositories.xml file in the packages folder:
<?xml version="1.0" encoding="utf-8"?>
<repositories>
</repositories>
After doing that, the packages appeared to be installed in my solution and I was able to add them to projects.
Additional Note: I had to use the "Manage NuGet Packages for Solution" option at the solution level to add the package to individual projects. Using Install-Package from the console still returns a 503 even though the packages is already installed in the solution.
You can also get this error if you are using a VPN client (e.g. Cisco AnyConnect) and you have recently renewed your VPN certificate. The issue can occur after you have updated your certificate, but before you have rebooted. A reboot resolves the issue.
It is a pretty old question, but I have just encountered the same problem. In my case it occurred because I had more than one nuget package source configured in the Visual Studio Package Manager. In my company we use NuGet to get mainstream packages and MyGet for our own stuff.
When I attempted to pull a pretty big package it failed with a 503 code and the error link looked pretty odd, it had MyGet in it istead of NuGet. Turns out Visual Studio package manager tried to pull it from another source despite having NuGet chosen as a current source. Disabling other sources and then proceeding with a download fixed it.
Hopefully it will help somebody who stumbled upon this thread just like I did.
Another possible reason for recieving 503: If you're using Azure DevOps feed, then NuGet packages are limited to 500 MB.