How can I create Fuzzy Rule Table with 3 input and 1 output? It's easy to make this kind of rule table with 2 inputs and 1 output but I have no idea how to make this kind of table if the input is more than 2.
Click here for sample 2 input 1 output rule table
Related
I am trying to compute a N_break that has to "satisfy" a condition. I have a variable which indicates 1 or 0. Lets call that variable "HT". Every lopnr is also labled in every row multiple times. So first 10 rows can be ID nr 1. And next 20 can be ID nr 2 and so on.
My question is: How do i create a N-break with lopnr as breakvariable that has to have HT=1? I am not allowed to select only 1s on variable HT before, since i need the 0s in the file.
A few simple ways to do this:
1 - USE FILTER
filter cases by HT.
aggregate ....
when you get back to original dataset, use:
filter off.
use all.
2 - COPY DATASET
dataset name orig.
dataset copy foragg.
dataset activate foragg.
select if HT.
aggregate....
3 - TEMPORARY SELECTION
temporary.
select if HT.
aggregate....
I have a PDI transformation that gets 3 fields from a result row:
SEARCH_VALUE
Asset
IP_V4_Address
The next hop is a table input that searches based on search value and returns one column value, something like abcd-1234.
SELECT DISTINCT p.txt_reqID FROM ...
Now, after my table input runs, the resulting stream only has 1 column (the txt_reqID). I'd like my output stream to have 4 columns - the original 3 + the new one from the table input. How do I do that?
Here is the transformation and the input row structure:
This is the table input setup:
I'm only able to access the txt_reqID field after the table input, I can't figure out how to tell it to pass the other 3 through.
You can achieve this by having Select values step after the Get rows from result step. Select Values is required to duplicate your SEARCH_VALUE as you need this field in both SELECT and in the WHERE clause and also it can be used to reorder the fields before table input.
In Table input you can use the query like
SELECT DISTINCT p.txt_reqId, ? as SearchValue, ? as Asset, ? as IPV4 address
FROM ... WHERE d.value like ?
Here is the sample for the same
click here for the image
I am not sure what the technical term for what I am trying to do is.
Hoping raw data and output below will clearly define the use case.
Raw data :
This is what my raw data looks like
Output 1 :
this is what I am trying extract first
Here I am trying to get a table where the first column has the name of the guests and 2nd column has the count of times they have featured in the table as a guest.
Output 2 :
this what I am trying extract next
Here I am trying to map months against names and see how many nights one has collected in which month.
One way to achieve this would be to create a temp table with 5 columns,column 1 with Guest names,
column 2 with count of occurrence in guest 1 column in raw data table,
column 3 with count of occurrence in guest 2 column in raw data table,
column 4 with count of occurrence in guest 3 column in raw data table,
column 5 with total of previous 3 columns.
But I am trying to find a proper solution through tableau, if possible. Because this way would not help me achieve Output 2.
Plain text raw data if you'd like to work on it :
booking by,Guest 1,Guest 2,Guest 3,stay start,stay end,hotel code
Ram,Seema,Ram,,May 1 2018,May 2 2018,BBST
Karan,Ram,Seema,,May 6 2018,May 7 2018,BRRLY
Mahesh,Mahesh,Seema,Ram,June 2 2018,June 4 2018,BBST
Krishna,Krishna,,,June 2 2018,June 3 2018,BRRLY
Seema,Seema,,,June 7 2018,June 8 2018,BRRLY
I am adept in both SQL and CR, but this is something I've never had to do.
In CR, I load a table that will always contain 1 record. There is a range of columns (like Column1, Column2 ... Column60). (bad design, I know, but I can't do anything to change that).
Thanks to this old design I have to manually add each column in my report like this:
-----------
| TABLE |
-----------
| Column1 |
| Column2 |
| Column3 |
| ... |
-----------
Now I would like to be able to create a subreport and create a datasource for it in such a way that [Column1...Column60] becomes a collection [Row1...Row60]. I want to be able to use the detailsection of the subreport to dynamically generate the table. That would save me a lot of time.
Is there any way to do that? Maybe a different approach to what I had in mind?
Edit
#Siva: I'll describe it the best way I can. The table exists out of 500+ columns and will only hold 1 record (never more). Because normalization was never taken into account when creating these tables (Objective C / DBF ages) columns like these: Brand01,Brand02,Brand03...Brand60 should have been placed in a separate table named "Brands"
The document itself is pretty straight forward considering there's only one record. But some columns have to be pivoted (stacked vertically) and placed in a table layout on the document which is a lot of work if you have to do it manually. That's why I wanted to feed a range of columns into my subreport so I can use the detail section of my subreport to generate the table layout automatically.
Ok got it... I will try to answer to the extent possible...
you need to have 2 columns in report that will show the 60 column names as 60 rows as 1st column and 60 column data as 2nd column. For this there are two ways that I can think of.
if columns are static and report need to be developed only once then though its a tough job manually create 120 formulas 60 for row names where you will write column names and 60 for data for respective columns and place in report since you have only one record you will get correct data. Like below:
formula 1:
column1 name // write manually
Formula 1:
databasefield for column1 // this has data for column1
Above will be one row in report like this you will get 120 formulas 60 rows and you don't need sub report here main report will do the job.
Since you are expecting dynamic behavior (Though columns are static), you can create view from database perspective or datatable (Please note I have no idea on datatable use it as per your convinience).
Create in such a way that it has 2 columns in table and in report use cross tab that will give you dynamic behaviour.
In cross tab column1 will be rows part and column 2 will be data.
Here also I don't see any requirement for sub report you can directly use main report. If you want sub report you can use aswell no harm since you have only 1 record
I have the following problem with MS Access:
Suppose I have a list of companies with monthly performance values. I can view the performance of a single company in a chart by hooking the chart into a query with a Month column and a Performance column.
Now suppose I want to display a chart for N companies. I could theoretically do this if I were to generate a query with a Month column and N Performance columns (one for each company). Is there any way to create a query with a variable column count like this? I have a SQL backend that I can use if necessary, and I'm fine with putting together any VBA code necessary to support it. The only impediment I'm seeing is that I'm stuck using MS Access, which I am not very familiar with.
So here are my main questions:
Is this even possible?
How would I go about tackling this issue? I'm trying to minimize research time, so it would be great if I could just get pointed in the right direction.
Thanks!
With this table:
company pmonth performance
1 1 10
2 1 8
3 1 15
1 2 15
2 2 5
3 2 25
1 3 5
2 3 4
3 3 20
I create this query:
SELECT p.company, p.pmonth, p.performance
FROM MonthlyPerformance AS p;
Then change the query to PivotChart View and drag company field to "Drop Series Fields Here", drag pmonth to "Drop Category Fields Here", and drag performance field to "Drop Data Fields Here".
If you prefer, you can create a form using the same query SQL as its data source, then set the form's Default View to PivotChart, and set up the chart the same way as I did for PivotChart view on the query.
If that's not what you want, give us some more information about the type of chart you want and the context in which you will display it.