I'm working on trying to setup my local database with some mock data to work with. We have a development AWS account with a postgres database. I would like to create a backup of it, export it to my local computer, and restore to my local postgres database.
I've been trying to find how to do this online, but everything I'm finding is on how to backup to AWS and to restore back to AWS. I tried creating a snapshot and exporting it via S3 - but the snapshot doesn't produce a sql file to restore from like I was expecting.
If anyone can point me in the right direction I would very much appreciate it :)
I am afraid that the only chance you have is pg_dump/pg_restore.
Even if Amazon lets you get your hands on its file system backups, which I doubt, they may be of little use to you, since Amazon runs modified versions of PostgreSQL and you cannot be sure that the physical file format is identical to PostgreSQL.
Related
I would be happy to get your help / feedback re data load.
Goal:
Load source data from a Postgres database, which is located in GCP project A to another Postgres database, which is located in GCP project B.
Challenge:
Get a connection (I have an IAM account with sufficient rights to run a COPY TO / COPY FROM command) to the Postgres DB in GCP Project A and copy the table either to a CSV or create a dump that can be used in order to be inserted to another Postgres DB in GCP Project B.
How do I connect to the database (e.g. if I create a key, where shall I store the json keyfile and would that approach even be feasible?) with this IAM email account?
Other ways I've researched were to use psycopg2 (thus I could use the function cursor.copy_expert (which doesn’t need any superuser right or Postgres user credentials and copy the data), but I didn’t succeed in connecting to the database with psycopg2 due to challenges with cloud proxy.
Another idea was to use pg_dump or gcloud sql export csv.
I would be curious if some of you were facing a similar challenge and how did you solve it and what might be the best way/practice
You can have a try out database migration service. You can set up a continuous migration configuration and use Cloud SQL for PostgreSQL.
Hello after a lot of searching I've come to these solutions:
If you have continuous copy, you need to use the database migration service, check this documentation.
If you have one shot copy:
you can restore your instance, see the bottom page of this documentation
you can create a bucket and backup your instance on it, then import it from the other project
I'm giving a try on PoWA, but I've got a little problem.
My Postgres database is running on AWS RDS.
PoWA needs HypoPG in order to suggest indexes.
But RDS doesn't support HypoPG extension. So I had to install PoWA at my backup database (outside RDS).
The problem is: PoWA isn't analyzing the restored database. It can't recognizes any data. If I execute some SQL queries manually it works though.
Is there something that I can be missing?
And, when I tried Ankane Dexter, I could show it the log files path (dumped at the backup database in parallel). Is there a way to do so in PoWA?
Thanks.
I have a need to load data from S3 to Postgres RDS (around 50-100 GB) I don't have the option to use AWS Data Pipeline and I am looking for something similar to using the COPY command to load data in S3 into Amazon Redshift.
I would appreciate any suggestions on how I can accomplish this.
Originally, this answer was trying to use the S3 to Postgres RDS Functionality. That whole enterprise failed (see below).
The way I have finally been able to do this is:
Set-up an EC2 instance with psql installed (see below near end of post)
Copy the relevant CSVs to import from S3 to the local instance
Use the psql /copy command to import the files up
This last part is really, really important. If you use the SQL COPY command the entire RDS Postgres role structure will frustrate you to no end. It has a wonky SUPERRDSADMIN role which is not very super at all. However, if you use the psql /copy commany you apparently can do anything. I have confirmed this be the case and have started my uploads succesfully. I will come back and re-edit this post (time permitting) to add relevant documentation steps for the above.
Caveat Emptor: The post below was all the original work I had done trying to get this implemented. I don't want to bury the lead despite multiple efforts (including what can only be described as pathetic tech support from AWS) I don't believe that this feature is ready for prime time. Despite a very simple test environment, easy to replicate, AWS has not provided an effective way to not get the copy statement to crap out as follows:
The actual call to aws_s3.table_import_from_s3(...) is reporting a permission problem between RDS and S3. From my research work with psql this appears to be a C library, probably installed by AWS.
NOTICE: CURL error code: 28 when attempting to validate pre-signed URL, 1 attempt(s) remaining
NOTICE: HINT: make sure your instance is able to connect with S3.
S3 to Postgres RDS Functionality Now Added
On 2019-04-24 AWS released functionality allowing a Postgres RDS to load directly from S3. You can read the announcement here, and see the documentation page here.
I am sharing with the OP because this appears to be the AWS supported way of solving the question posed.
Key summary points:
Requires Postgres 11.1 or greater
Need access to psql and the ability to connect it to the RDS instance
Need to install the aws_s3 extension which pulls in aws_commons.
You can get to the S3 bucket by specifying credentials or by assigning IAM roles to RDS
It advertises supporting all of the same data formats as the postgres COPY command
It currently only appears to support a single file at a time (ie no regex)
The instructions are fairly detailed and provide a variety of paths to configuring (AWS CLI scripts, Console instructions, etc). Additionally, the option to use your IAM keys rather than have to set-up roles is nice.
I did not find a way to download just psql, so I had to bring down a full postgres install down to my mac, but that was no big deal with brew:
brew install postgres
and since the DB service does not get activated it is the quickest way to get psql.
Update: Decided that having psql on my mac was a security hole, port forwarding, etc. I found that there is a simple Postgres install available for AMI Linux 2 under the AMI Extras rubric. The install command is fairly simple on your ami instance type.
sudo amazon-linux-extras install postgresql10
psql is fairly easy to use, however, important to keep in mind that any instructions to psql itself are escaped by a \. Documentation on psql can be found here. Recommend going through it at least once before executing the AWS recommended scripts.
To the extent you run tight security and have access to your RDS instances seriously restricted (which I do) don't forget to open up the ports from your AMI instance running Postgres to your RDS instance.
If your preference is a GUI then you can try to use PGAdmin4. It is the AWS recommended way of connecting to RDS Postgres instances according to the docs. I was unable to get any of the SSH tunneling features to work (which is why I ended up doing the localhost SSH mapping that I used for psql). I also found it to be rather buggy in other ways. Reading reviews of the product it seems that version 4 may not be the stablest of releases.
http://docs.aws.amazon.com/redshift/latest/dg/t_loading-tables-from-s3.html
Use the COPY command to load a table in parallel from data files on
Amazon S3. You can specify the files to be loaded by using an Amazon
S3 object prefix or by using a manifest file.
The syntax to specify the files to be loaded by using a prefix is as
follows:
copy <table_name> from 's3://<bucket_name>/<object_prefix>'
authorization;
update
Another option is to mount s3 and use direct path to the csv with COPY command. I'm not sure If it will hold 100GB effectively, but worth of trying. Here is some list of options on software.
Yet another option would be "parsing" s3 file part by part with something described here to a file and COPY from named pipe, described here
And the most obvious option to just download file to local storage and use COPY I don't cover at all
Also worth of mentioning would be s3_fdw (status unstable). Readme is very laconic, but I assume you could create a foreign table leading to s3 file. Which itself means you can load data to other relation...
My problem is to get big(250Gb) postgres dump on my local machine.
Its on AWS RDS. I tried to dump it to local machine, but it takes too long, kinda 3+ days.
Trying to find a way to dump it into S3 and download from there safely. May be you could suggest more effective way to do that. Will appreciate any kind of help.
Thanks!
As of my knowledge, aws does not provide a way to backup db into s3
you can take a look into this question and answers,
Export huge database from amazon RDS to local mysql
here is one answer
If the data is that big I would suggest copying the RDS snapshot on S3, as explained here.
Link to documentation to copy snapshot to s3
This topic is covered in this StackOverflow thread Exporting a AWS Postgres RDS Table to AWS S3
Another solution would be to spin up an EC2 instance and dump the database to a local EBS volume that is large enough for the following steps. Then chose one of the following:
Compress the DB dump into multiple files and copy to S3 for download. I would use a smart S3 download manager given the size of the database dump.
Export the S3 data using Snowball Export S3 Data. If your Internet connection is not fast enough / reliable enough then Snowball will get you the data.
we are using Heroku Postgres with Ruby on Rails 3.2.
A few days before, we deleted important data by mistake using 'heroku run db:load' with misconfigured data.yml, that is, drop tables and the recreate tables with almost no data.
Backup data is only available 2 weeeks before, so we lost data of 2 weeks.
So We need to recover not by PG Backup/pg_dump but by postgresql's system data files.
I think, the only way to recover data is to restore data from xlog or archive file, but of course we don't have permission to be Super User/Replication Role to copy postgres database on heroku (or Amazon EC2) to local server.
Is there anyone who confronted such a case and resolved the problem?
Your only option is the backups provided by the PgBackups service (if you had that running). If not, Heroku support might have more options available.
At a minimum, you will have some data loss, but you can guarantee you won't do it again ;)