I have small problem with VSCode folder, that opened by default.
Problem description: I start new instance of VSCode (trough File->New Window), and then if I choose File->Open Folder it opens dialog with my Windows user folder as starting point (C:\Users\MyUser)
Question: How can I change that folder in settings (if it possible)? So by default it will show as start point for example D:\development\ ?
At the time I write this answer, this is not possible. There are two problems on Windows, and one problem on Mac and Linux:
VS Code does not provide a default path to the file dialog 1. It does remember the last folder that you opened a file in, but that path cannot be used as a default because it is overwritten constantly.
On Windows only, Electron ignores the default path when creating a file dialog if the default path is a directory 2.
An extension also cannot solve this, because extensions are not allowed to modify the File menu 3.
I think the best option at this point is to pin a folder to the Quick Access area in Windows Explorer, as suggested in a comment, or to put an actual shortcut in the user profile folder.
Workspaces and File > Open Recent may also be helpful if you often open the same folders.
Your main problem is that you are unable to open your specific folder in VScode.
To solve that you can simply open the terminal/cmd in that specific window by just typing cmd in your search bar or just by pressing shift+right-click in that folder.
Now your cmd is open and you just have to type "code ." in the cmd and press enter to open the current folder in your VSCode.
In case that code . doesn't work for you then you have to add the Vscode in the environment variables of your windows.
Visual Studio doesn't provide a specific feature to open a specific path. But there is a solution to your problem. You are saying that you want D:\develpment as a default when you open VS Code. You can go to that specific directory or create shortcut to desktop then click right click on that folder and then click on open with code. If you didnot see open with code then reinstall your VS code and check on open with code when you are reinstalling VS Code.
make a shortcut on the desktop for vscode and then modify it and add the folder after the .exe command. This will default open that folder when you double click on it.
Visual Studio Code can be installed in two ways - User setup and System setup. I strongly believe you have User setup installed in your PC. Try re-installing it System-wide. That should probably fix your problem.
For more information: https://code.visualstudio.com/docs/setup/windows#_user-setup-versus-system-setup
PS: A lot more information is needed, you can share a screenshot of the window and elaborate more on it.
Visual Studio Code source control panel is empty when I click on it. Nothing to expand and nothing to click on.
Things I've tried:
Uninstalled/Reinstalled Git
Uninstall/Reinstalled VS Code
Removed extensions folder
Open your project with cmd.
> cd your-folder-location
> code . -n
It worked for me
Dude, just lost an hour because my SCM in VSCode randomly stopped showing anything today. I restarted everything, tried git init, everything on the forums. Made sure Git built in extension is enabled, mine was already enabled so I was totally lost.
All I had to do was disable and then reenable the built in Git extension. and it fixed it.
Go to Extensions.
Filter by "built in".
Click the gear icon by Git, and click disable.
Then click it again, and click enable.
Here is a screenshot reference
In my case, somehow, the Source Control Repositories option, available under the 3 dots ... on the SOURCE CONTROL tab, was no longer selected.
All I had to do was press the ... and select Source Control Repositories, then select the correct repo, and all the changes were again listed.
I had a similar issue. It seems vs code has two source control extensions. When I clicked View -> SCM it opened an extension with changes displaying.
source control extension 1
source control extension 2
I had this problem 2-3 times for the last 2 years (OS -> Linux Mint). The changes on any file didn't appear to the source control nor have they been marked on the line I've edited. When manually go to "Source control" and click on the refresh button they appear but the lines that I had change didn't light up (there were no visual marking on the files after editing them). This happened when I switched to a different branch while the workspace was open to the 2 monitors at the same time. Or when working on several projects (opened 2-3 or more VS Code instances). The scariest thing was that it didn't work not only for one repository(project) but for all of them. I've read alot on the subject and tried everything that I found and think of. There is some issue with git path mapping or something.
The thing that I tried:
reload VS Code
restarting VS Code
disable all extensions
enable/disable all git related options in (file -> preferences -> settings)
deleting (folders and files) and cloning the repository
updating git
removing and installing git
restarting PC (don't judge me I was desperate)
But the only solution that worked for me was:
open VS Code (if open, don't close it)
go to the directory where you keep your repositories (not from VS Code but from you file explorer).
go one folder above it (if you are in .../{{some folder}}/{{you repos}}, go to ../{{some folder}})
then open you repositories containing folder (/{{you repos}}) by right click -> open with VS Code
wait until everything loads. The Source Control will mark alot of changes, don't worry about it.
then close VS Code (all windows (instances), because it will open a new instance)
after that go to the directory where you keep your repositories again and right click and open with VS code the repository of you choice. Now at this point the Source control will start working properly.
What worked for me was going to my "code" folder where I keep all my repos, right-clicking on the folder containing the repo I want and opening that folder with VS Code.
The VS Code window for this specific repo was closed. I did have another window for a different repo open. As soon as the window opened, the changes showed up in source control and I was able to commit, push and everything else like normal.
I faced this problem when I opened a repo in a directory inside symlink.
My solution: just open this directory in original destination without any symlinks
I had this problem in a repository not as a problem from config but because I had a coverage folder with thousands of files not tracked and it seemed to slow the process of checking that out too much.
So I added that folder to .gitignore and it started working again.
Restating my Vscode And Giving time to load properly Solved my Problem
I had the same problem. What I did was:
Open another folder with File -> Open Folder...
Close the VSC
Open VSC
Open the original folder with File -> Open Folder...
After this I saw that the source control started loading and my changes came back.
Hope this works for you.
I couldn't see any changes in while trying git status. I opened changed files in text editor and they were not changed either. That lead me to conclusion that changes can't be seen by the system (and therefore by git).
The Autosave option was disabled, simply saving the changes helped.
That was my beginning with VSC, in Pycharm never had such problem.
I had this problem, because I was changing files one folder down from where I opened Visual Studio Code.
Solution- open Visual Studio Code without a location, File/Open Folder - open the folder I am directly working out of.
Unstaged changes now show in the direct folder I'm working in. Unstage changes previously auto-staged by Visual Studio Code when working on a nested project directory to see them (open a Terminal and run git reset).
I encountered the same issue, and I fixed that by removing the files.watcherExclude property in settings.json file.
Because the value of files.watcherExclude became { "**/**/*": true } somehow.
// settings.json
// remove or comment next line
// files.watcherExclude: { "**/**/*": true }
For me, the files were in WSL (Windows subsystem for linux) but I was not opening the folder as such.
in the bottom left, click the green >< symbol, then click "reopen folder in WSL"
VSC remote mode image
presto.
Go to View -> Terminal
cd to root folder, and run git status and see if you have any errors
I had a unsafe repository fatat error, as my repo was on a network drive. Did as suggested by git to add an exception and it fixed the issue.
close vscode
moved local Code config folder as backup (~/.config/Code/)
reopen vscode (this will still show problem)
close and reopen vscode (this will show db re-write issue but it will re-create config folder.)
this solved my problem. this reset many of my settings but It can be checked from config backup.
In setting check Git: Autorefresh
I experience this problem when I right click a folder and open it up with VS code. Instead now I start VS code from the start menu and after that I use File -> Open Folder option.
I experienced this issue with VSCode V1.70.1, all I did is just closing VSCode completely and open a new instance and I could find git changes appears simultaneously as expected.
If running into this issue on a Mac, make sure you are running your instance of Visual Studio Code from your Applications folder and not your Downloads folder. I managed to fire up an instance from the wrong folder and this prevented my Source Control from being able to properly load git info and also caused Visual Studio updates to fail. More on the issue can be found here.
Here is another possible solution for Linux users:
In my case, it was only not showing lines changed with the file open. Source control tab was showing fine.
I have a symlink from /var/www to /mnt/{hdd-uuid}/www. When I created my workspace, it was using the path /var/www/project-folder, instead of the full path, and this was giving me the error.
I opened my .code-workpsace file in another text editor and changed the references in the JSON from ../../../../var/www/project-folder to /mnt/{hdd-uuid}/www/project-folder, then reopen VS Code. Close all file tabs open and, when you open again a modified file it will show the lines changed.
It is possible that you need to trust the repo again.
Try opening project or folder which contains git files. Later try opening your wanted folder. This sorted the issue for me.
Double-check git is actually installed on your system. I just did a fresh install of Windows 11 the other day, and although one of the development tools I installed thereafter downloaded and supposedly installed git in Windows, actually, it never installed it. Fail!
I fixed this issue by toggled-on the AutoSave feature in VSCode via File > AutoSave. I noticed that the badge on the github does not show up until the file is actually saved first.
What worked for me was that I was forgetting to save, so just enabled autosave option.
File > Auto Save (check)
Open Visual Studio code -> View -> Appearance -> Show activity bar
I use the Eclipse RSE plugin to access files residing on a remote server (via SSH). There's one behaviour of this plugin which I find incredibly annoying: whenever I switch tabs in the editor, the Remote System view automatically selects the corresponding file in the tree... but, it does that by closing all nodes in the tree, and then re-opening to the file, but only to that file's node. All others remain closed. If I have other nodes open because I'm frequently using files from those nodes, I then have to dig through the tree again.
I assume that this is not just happening for me? Is anyone aware of any way to prevent this behaviour?
Thanks.
Toggle link with editor button in Remote systems view.
I'm looking for a good ssh console plugin for Eclipse, and can't find much at all. Would anyone have some good leads on one?
If you don't like the ssh.shells or ssh.terminals subsystems in Eclipse RSE, try using the Terminal View instead.
Open up Window -> Show View -> Other (or press Shift+Alt+Q then Q)
Type Terminal in the search box
Select the Terminal view listed under the Terminal folder
You'll see a window that looks similar to RSE's ssh.terminals subsystem... but with some extra buttons on the top right.
How to use it:
To fix the scrolling issue (ie: for programs like top), click the Scroll Lock button at the right.
For extra Terminal window tabs, click the down arrow on the New Terminal Connection button
To change the current terminal window's settings, use the Settings button.
If you really like the annoying command input box at the bottom, you can toggle it on and off with the appropriate button.
Change the Background Color:
For some reason, the default setting is to use a terribly hard to see white background. To change this:
Go to Window -> Preferences
Type Terminal in the search box at the top left, or select Terminal on the left.
Check the box that says Invert terminal colors
You can also configure a larger terminal buffer or connection timeouts here
Click Apply
Now the terminal should have a black background! If you want a local terminal, you can enable ssh on your local machine, and connect to localhost.
In Eclipse 3.4.1, there is the Remote Systems Explorer perspective that allows you to create and connect to SSH terminals (here)
There are plugins that exist that allow you up open WinSCP or Putty from within Eclipse.
I would advise maybe doing a search for "putty eclipse plugin" or similar
You can also try the Terminal plug-in for Eclipse
This plug-in provides a fully-working, command-line terminal to
Eclipse 3.7 or later (yes, even 4.2!) It works on Linux and MacOS
only.
More info at: http://alexruiz.developerblogs.com/?p=2428