I am writing a batch script to automate some processes.
this process runs a few different tools by stages, those tools creates the input necessary to run the next stage.
In one of the stages basically I open an .exe file and call a powershell file to simulate the "enter key" press, so far so good, it opens the tools and it starts to run run it, however what happens is that command line executes the next stage without waiting for the .exe file to finish, which is a important step thus that process creates the input for the next stage.
the command line I use is:
START /WAIT powershell -command .\bat.ps1
which runs this powershell script
[System.Diagnostics.Process]::Start("C:\folder\file.exe", "C:\temp\TestProject1\TestProject1.pjs /run /exit /SilentMode")
$wshell = New-Object -ComObject wscript.shell;
$wshell.AppActivate('title of the application window')
Sleep 1
$wshell.SendKeys('~')
I would like to know if there is a workaround that makes me wait till the .exe file finish running, and then start the new stage.
thanks for your help
I found a workaround, that partially responds to my question.
I put the START /WAIT command after the powershell command, so while the .exe is running the next stage is on waiting, however I will have to press "y" to continue the process once the .exe file is finished, which is a start.
Thanks once again
Have you tried using the Start-Process cmdlet and including the -Wait parameter in lieu of a direct call to Start()?
From your powershell prompt try help start-process to see if some of the other parameters like -NoNewWindow would also be useful to you.
I am working on a Reboot Scheduling application to be used on simple remote machines. It has to be user friendly though so I have to have multiple scripts and tasks in the background. my main GUI script needs to launch a Secondary Script in a NEW hidden window so that the Main GUI Script can close.
the Secondary Script (Reboot.ps1) will run until the machine restarts if the user has a scheduled reboot pending.
The code below starts the Secondary Script hidden but as a sort of "child job", since this script can run "forever" it wont end thus leaving the Main GUI script frozen open until killed in task manager (not very user friendly I know..)
$program = Powershell.exe -windowstyle hidden -file "C:\Reboot.ps1"
$scriptblock = $ExecutionContext.InvokeCommand.NewScriptBlock("Invoke-Command {$program}")
Invoke-Command -NoNewScope -Scriptblock $scriptblock
So what I'm asking is if anyone knows how to start the Secondary Script in a new PowerShell window, instance, environment, anything that allows the Main GUI Script to close. Preferably, less intensive if possible. :) thank you!
Use Start-Process's own -WindowStyle Hidden parameter to launch your script hidden and asynchronously (Start-Process's default):
Start-Process -WindowStyle Hidden powershell.exe -Args '-File', 'C:\Reboot.ps1'
Your code looks really complicated for what you're trying to achieve, use Start-Process
Start-Process powershell.exe -ArgumentList '-windowstyle hidden -file "C:\Reboot.ps1"'
I would like an easy way to run a process with different privileges from the same user without asking or knowing his/her password. A dialog is okay if necessary. I would prefer not to launch a PowerShell sub-process to accomplish this.
Scenario 1:
PowerShell script is running in admin-mode. I want to launch a script or an .exe without admin privileges but on the same user.
Scenario 2:
PowerShell script is running in normal mode. I want to launch a script or an .exe with admin privileges on the same user.
Let's split this into three parts.
First determine if current session is running with admin privileges:
$CurrentID = [System.Security.Principal.WindowsIdentity]::GetCurrent()
$CurrentPrincipal = new-object System.Security.Principal.WindowsPrincipal($CurrentID)
$adminRole = [System.Security.Principal.WindowsBuiltInRole]::Administrator
# Check to see if session is currently with admin privileges
if ($CurrentPrincipal.IsInRole($adminRole)) {
write-host "Yes we are running elevated."
}else{
write-host "No this is a normal user session."
}
Now, if we are running with or without elevation, you can start a new process with elevated privileges like this:
$newProc = new-object System.Diagnostics.ProcessStartInfo "PowerShell"
# Specify what to run
$newProc.Arguments = "powershell.exe"
# If you set this, process will be elevated
$newProc.Verb = "runas"
[System.Diagnostics.Process]::Start($newProc)
And lastly, if we have elevated privileges, but would like to start a new process without...
I have no idea. Will have to try to find the answer to this, but as it is not a common scenario, I had no luck so far.
EDIT: I have now seen a couple of “solutions” for this scenario. There is no native way to do this in .NET/PowerShell. Some are quite complicated (Calls to some 12 COM objects). This vista-7-uac-how-to-lower-process-privileges is a good reference.
The one that seems most elegant to me, is exploiting a “bug” in explorer.exe.
Just launch you .exe using explorer.exe and the resulting process runs without privilege elevation again.
$newProc = new-object System.Diagnostics.ProcessStartInfo "PowerShell"
# Specify what to run, you need the full path after explorer.exe
$newProc.Arguments = "explorer.exe C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe"
[System.Diagnostics.Process]::Start($newProc)
EDIT #2: Another way I have just found to start a new non-elevated process from an already elevated environment is to use the runas.exe with the 0x20000 (Basic User) trust level:
C:\> runas /showtrustlevels
The following trust levels are available on your system:
0x20000 (Basic User)
C:\> runas /trustlevel:0x20000 devenv
I use this as first command in all scripts that requires elevated mode, it transfer the script to another elevated process if I forgot to start up as Admin. You have to confirm so it's not suitable for automated tasks
If (-NOT ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")) {
$arguments = "& '" + $myinvocation.mycommand.definition + "'"
Start-Process powershell -Verb runAs -ArgumentList $arguments
Break }
I have a PowerShell script that monitors an image folder. I need to find a way to automatically run this script after the computer starts.
I already tried the following methods, but I couldn't get it working.
Use msconfig and add the PowerShell script to startup, but I cannot find the PowerShell script on that list.
Create a shortcut and drop it to startup folder. No luck.
%SystemRoot%\SysWOW64\WindowsPowerShell\v1.0\powershell.exe -File "C:\Doc\Files\FileMonitor.ps1"
or
%SystemRoot%\system32\WindowsPowerShell\v1.0\powershell.exe -File "C:\Doc\Files\FileMonitor.ps1"
Here's my PowerShell script:
$folder = "C:\\Doc\\Files"
$dest = "C:\\Doc\\Files\\images"
$filter = "*.jpg"
$fsw = new-object System.IO.FileSystemWatcher $folder, $filter -Property #{
IncludeSubDirectories=$false
NotifyFilter = [System.IO.NotifyFilters]'FileName, LastWrite'
}
$onCreated = Register-ObjectEvent $fsw Created -SourceIdentifier FileCreated -Action {
Start-Sleep -s 10
Move-Item -Path C:\Doc\Files\*.jpg C:\Doc\Files\images
}
I also tried to add a basic task using taskschd.msc. It is still not working.
Here's what I found, and maybe that will help to debug it.
If I open up a PowerShell window and run the script there, it works. But if I run it in a command prompt,
powershell.exe -File "C:\Doc\Files\FileMonitor.ps1"
It will not work. I am not sure it's a permission problem or something else.
BTW, I have PowerShell 3.0 installed, and if I type $host.version, it will show 3 there. But my powershell.exe seems like it is still v1.0.
%SystemRoot%\system32\WindowsPowerShell\v1.0\powershell.exe
I finally got my PowerShell script to run automatically on every startup. You will need to create two files: the first is the Powershell script (e.g. script.ps1) and the second is a .cmd file that will contain commands that will run on the command prompt (e.g. startup.cmd).
The second file is what needs to be executed when the computer starts up, and simply copy-pasting the .ps1 to the startup folder won't work, because that doesn't actually execute the script - it only opens the file with Notepad. You need to execute the .cmd which itself will execute the .ps1 using PowerShell. Ok, enough babbling and on to the steps:
Create your .ps1 script and place it in a folder. I put it on my desktop for simplicity. The path would look something like this:
%USERPROFILE%\Desktop\script.ps1
Create a .cmd file and place it in
%AppData%\Microsoft\Windows\Start Menu\Programs\Startup\startup.cmd
Doing this will execute the cmd file every time on startup. Here is a link of how to create a .cmd file if you need help.
Open the .cmd file with a text editor and enter the following lines:
PowerShell -Command "Set-ExecutionPolicy Unrestricted" >> "%TEMP%\StartupLog.txt" 2>&1
PowerShell %USERPROFILE%\Desktop\script.ps1 >> "%TEMP%\StartupLog.txt" 2>&1
This will do two things:
Set the Execution Policy of your PowerShell to Unrestricted. This is needed to run scripts or else PowerShell will not do it.
Use PowerShell to execute the .ps1 script found in the path specified.
This code is specifically for PowerShell v1.0. If you're running PowerShell v2.0 it might be a little different. In any case, check this source for the .cmd code.
Save the .cmd file
Now that you have your .ps1 and .cmd files in their respective paths and with the script for each, you are all set.
You could set it up as a Scheduled Task, and set the Task Trigger for "At Startup"
What I do is create a shortcut that I place in shell:startup.
The shortcut has the following:
Target: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -Command "C:\scripts\script.ps1"
(replacing scripts\scripts.ps1 with what you need)
Start In: C:\scripts
(replacing scripts with folder which has your script)
You could create a Scheduler Task that runs automatically on the start, even when the user is not logged in:
schtasks /create /tn "FileMonitor" /sc onstart /delay 0000:30 /rl highest /ru system /tr "powershell.exe -file C:\Doc\Files\FileMonitor.ps1"
Run this command once from a PowerShell as Admin and it will create a schedule task for you. You can list the task like this:
schtasks /Query /TN "FileMonitor" /V /FO List
or delete it
schtasks /Delete /TN "FileMonitor"
This is really just an expansion on #mjolinor simple answer [Use Task Scheduler].
I knew "Task Scheduler" was the correct way, but it took a bit of effort to get it running the way I wanted and thought I'd post my finding for others.
Issues including:
Redirecting output to logs
Hiding the PowerShell window
Note: You must have permission to run script see ExecutionPolicy
Then in Task Scheduler, the most important/tricky part is the Action
It should be Start a Program
Program/Script:
powershell
Add arguments (optional) :
-windowstyle hidden -command full\path\script.ps1 >> "%TEMP%\StartupLog.txt" 2>&1
Note:
If you see -File on the internet, it will work, but understand nothing can be after -File except the File Path, IE: The redirect is taken to be part of the file path and it fails, you must use -command in conjunction with redirect, but you can prepend additional commands/arguments such as -windowstyle hidden to not show PowerShell window.
I had to adjust all Write-Host to Write-Output in my script as well.
Try this: create a shortcut in startup folder and input
PowerShell "& 'PathToFile\script.ps1'"
This is the easiest way.
Prerequisite:
1. Start powershell with the "Run as Administrator" option
2. Enable running unsigned scripts with:
set-executionpolicy remotesigned
3. prepare your powershell script and know its path:
$path = "C:\Users\myname\myscript.ps1"
Steps:
1. setup a trigger, see also New-JobTrigger (PSScheduledJob) - PowerShell | Microsoft Docs
$trigger = New-JobTrigger -AtStartup -RandomDelay 00:00:30
2. register a scheduled job, see also Register-ScheduledJob (PSScheduledJob) - PowerShell | Microsoft Docs
Register-ScheduledJob -Trigger $trigger -FilePath $path -Name MyScheduledJob
you can check it with Get-ScheduledJob -Name MyScheduledJob
3. Reboot Windows (restart /r) and check the result with:
Get-Job -name MyScheduledJob
see also Get-Job (Microsoft.PowerShell.Core) - PowerShell | Microsoft Docs
References:
How to enable execution of PowerShell scripts? - Super User
Use PowerShell to Create Job that Runs at Startup | Scripting Blog
Copy ps1 into this folder, and create it if necessary. It will run at every start-up (before user logon occurs).
C:\Windows\System32\GroupPolicy\Machine\Scripts\Startup
Also it can be done through GPEDIT.msc if available on your OS build (lower level OS maybe not).
Be sure, whenever you want PowerShell to run automatically / in the background / non-interactive, it’s a good idea to specify the parameters
-ExecutionPolicy Bypass to PowerShell.exe
PowerShell.exe -ExecutionPolicy Bypass
I have a script that starts a file system watcher as well, but once the script window is closed the watcher dies. It will run all day if I start it from a powershell window and leave it open, but the minute I close it the script stops doing what it is supposed to.
You need to start the script and have it keep powershell open.
I tried numerous ways to do this, but the one that actually worked was from http://www.methos-it.com/blogs/keep-your-powershell-script-open-when-executed
param ( $Show )
if ( !$Show )
{
PowerShell -NoExit -File $MyInvocation.MyCommand.Path 1
return
}
Pasting that to the top of the script is what made it work.
I start the script from command line with
powershell.exe -noexit -command "& \path\to\script.ps1"
A relatively short path to specifying a Powershell script to execute at startup in Windows could be:
Click the Windows-button (Windows-button + r)
Enter this:
shell:startup
Create a new shortcut by rightclick and in context menu choose menu item: New=>Shortcut
Create a shortcut to your script, e.g:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -NoProfile -Command "C:\Users\someuser\Documents\WindowsPowerShell\Scripts\somesscript.ps1"
Note the use of -NoProfile
In case you put a lot of initializing in your $profile file, it is inefficient to load this up to just run a Powershell script. The -NoProfile will skip loading your profile file and is smart to specify, if it is not necessary to run it before the Powershell script is to be executed.
Here you see such a shortcut created (.lnk file with a Powershell icon with shortcut glyph):
This worked for me. Created a Scheduled task with below details:
Trigger : At startup
Actions:
Program/script : powershell.exe
Arguments : -file
You can see scripts and more scheduled for startup inside Task Manager in the Startup tab. Here is how to add a new item to the scheduled startup items.
First, open up explorer to shell:startup location via start-button => run:
explorer shell:startup
Right click in that folder and in the context menu select a new shortcut. Enter the following:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -NoProfile
-Command "C:\myfolder\somescript.ps1"
This will startup a Powershell script without starting up your $profile scripts for faster execution. This will make sure that the powershell script is started up.
The shell:startup folder is in:
$env:APPDATA\Microsoft\Windows
And then into the folder:
Start Menu\Programs\Startup
As usual, Microsoft makes things a bit cumbersome for us when a path contains spaces, so you have to put quotes around the full path or just hit tab inside Powershell to autocomplete in this case.
If you do not want to worry about execution policy, you can use the following and put into a batch script. I use this a lot when having techs at sites run my scripts since half the time they say script didnt work but really it's cause execution policy was undefined our restricted. This will run script even if execution policy would normally block a script to run.
If you want it to run at startup. Then you can place in either shell:startup for a single user or shell:common startup for all users who log into the PC.
cmd.exe /c Powershell.exe -ExecutionPolicy ByPass -File "c:\path\to\script.ps1"
Obviously, making a GPO is your best method if you have a domain and place in Scripts (Startup/Shutdown); under either Computer or User Configurations\Windows Settings\Scripts (Startup/Shutdown).
If you go that way make a directory called Startup or something under **
\\yourdomain.com\netlogon\
and put it there to reference in the GPO. This way you know the DC has rights to execute it. When you browse for the script on the DC you will find it under
C:\Windows\SYSVOL\domain\scripts\Startup\
since this is the local path of netlogon.
Execute PowerShell command below to run the PowerShell script .ps1 through the task scheduler at user login.
Register-ScheduledTask -TaskName "SOME TASKNAME" -Trigger (New-ScheduledTaskTrigger -AtLogon) -Action (New-ScheduledTaskAction -Execute "${Env:WinDir}\System32\WindowsPowerShell\v1.0\powershell.exe" -Argument "-WindowStyle Hidden -Command `"& 'C:\PATH\TO\FILE.ps1'`"") -RunLevel Highest -Force;
-AtLogOn - indicates that a trigger starts a task when a user logs on.
-AtStartup - indicates that a trigger starts a task when the system is started.
-WindowStyle Hidden - don't show PowerShell window at startup. Remove if not required.
-RunLevel Highest - run PowerShell as administrator. Remove if not required.
P.S.
If necessary execute PowerShell command below to enable PowerShell scripts execution.
Set-ExecutionPolicy -Scope LocalMachine -ExecutionPolicy Unrestricted -Force;
Bypass - nothing is blocked and there are no warnings or prompts.
Unrestricted - loads all configuration files and runs all scripts. If you run an unsigned script that was downloaded from the internet, you're prompted for permission before it runs.
I 'm aware that people around here don't need a tool like this. But I think it will be useful especially for novice users. Auto start tool It is a Portable freeware which designed to simplify the process to automatically launch an App or script when you login to Windows. It offers 3 different options for autostart
Task Scheduler
Startup folder
Registry run key
The best part of the tool is supports powershell scripts (.Ps1) . this means that you can run a Powershell script automatically at system startup with all 3 methods.
Download
https://disk.yandex.com.tr/d/dFzyB2Fu4lC-Ww
Source:
https://www.portablefreeware.com/forums/viewtopic.php?f=4&t=25761
One thing I found. if you are using Write-Host within your PowerShell scripts, and are also using Task Scheduler (as shown in the posts above), you don't get all the output from the command line.
powershell.exe -command C:\scripts\script.ps1 >> "C:\scripts\logfile.log"
In my case, I was only seeing output from commands that ran successfully from the PowerShell script.
My conclusion so far is PowerShell uses Out-File to output to another command or in this case a log file.
So if you use *> instead of >> you get all the output from the CLI for your PowerShell script, and you can keep using Write-Host within your script.
powershell.exe -command C:\scripts\script.ps1 *> "C:\scripts\logfile.log"
https://lazyadmin.nl/powershell/output-to-file/
You can also run the script in the background, regardless of user login.
Within your task in Task Scheduler set "Run whether user is logged on or not", and then in the password prompt type your hostname\username then your password (In my case an account with Admin permissions).
I used Set-ExecutionPolicy RemoteSigned -Scope CurrentUser to get around the script execution problem. I still would have preferred to run it on a per-process basis though. A problem for another time.
I have 2 scripts working, when I start them manually.
Moving mouse cursor out of Screen:
[system.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") | out-null
[System.Windows.Forms.Cursor]::Position = New-Object System.Drawing.Point(1999,100)
If there is a chrome browser open with title HUD, put it to kiosk mode:
[void] [System.Reflection.Assembly]::LoadWithPartialName("'Microsoft.VisualBasic")
[Microsoft.VisualBasic.Interaction]::AppActivate("Hud - Google Chrome")
[void] [System.Reflection.Assembly]::LoadWithPartialName("'System.Windows.Forms")
[System.Windows.Forms.SendKeys]::SendWait("{F11}")
If I put them in a Scheduled Task on Windows 7 they don't work.
They work if I start a batch file calling the script file
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noninteractive -command "&C:\Users\Miniuser\Documents\chromeHUD.ps1"
But not if I start the batch file in a Scheduled Task.
It seems in a Scheduled Task I can't acces my UI elements.
Any ideas?
When the script runs as a scheduled task, it runs in a different context/session and there is no GUI that it can "see", nor any way to interact with your existing session.
As alroc answers, it does run under another context/session.
I was not able to find any workaround to get pass this... Using pure powershell... However i was able to get the job done with wscript.
in your PS script, open your chrome with this
(new-object -com wscript.shell).run("http://localhost/",3)
It will open the default browser in full screen. i could use this with sendkeys in the task scheduler!
To run a script as a scheduled task that must interact with the desktop
You have to create a folder (or two on a 64bit-windows):
(32Bit, always) C:\Windows\System32\config\systemprofile\Desktop
(64Bit) C:\Windows\SysWOW64\config\systemprofile\Desktop