I am setting up VSCode for Ada. I typed in a known good test program and tried to "Run -> Start Debugging". In the PROBLEMS (Crtl+Shift+M) window, a message appears:
"No project found in root directory. Please create a project file and add it to the configuration."
I have read the documentation and looked around in the VSCode editor and have not found anything to correct this error. Can someone provide suggestions? Thanks.
The language extension is looking for a project file (.gpr file). Here are some instructions to set that up: https://github.com/AdaCore/ada_language_server/wiki/Getting-Started
I saw some extra procedures inside the extension itself. There were extra steps to complete the setup. I started Ada programming with a simple text editor and the gnat compiler so these additional steps were not anticipated. Sorry for the trouble.
Related
I'm using VSCode. After the last update of the IDE, I see this error (Even if I didn't open any project to work on).
I googled it, and I tried several actions according to this link:
https://github.com/microsoft/TypeScript/issues/43838
but none of them seems to work.
Anyone faced the issue? (I'm not using TypeScript in any of my projects and I don't have any tsconfig.ts file). Is it related to one of my VSCode extensions?
It is a general update problem about visual-studio-code with the last update. Issue can be followed from here: https://github.com/microsoft/vscode/issues/168420
Installing JavaScript and TypeScript Nightly extension is helpful for me.
Configure .eslintrc.json in your folder again and reload the vs code
example:
.eslintrc.json file for salesforce
Or
you can refer below link to config your eslint file
https://eslint.org/docs/latest/user-guide/configuring/
I know there are questions like this on SO, but none of the given solutions helped me.
I also tried to ask this question on netbeans forum, but they haven't responded to my questions, probably because they just don't know answers.
SO community is a "bit" bigger than the one on the netbeans forum, so I hope I'll get some clue.
I'm trying to get SASS working in Netbeans 8.0.2 (Ubuntu). I installed sass, it sits in /sur/local/bin/sass. I set up this path in NB options. I set up paths in project properties. And... nothing happens when I save a css file. Shouldn't there be at least a warning message if something's wrong?
Yes, I have "generate extra information (debug)" and "open output on error" checked. The path to the sass executable is also correct.
And yes, I also have "compile Sass files on Save" checked.
In project properties / Input and Output fields I tried relative and full urls. I also tried using ${web.root} variable.
I use Netbeans for PHP, but I don't think it matters.
None of these solutions work for me, especially that most of them is for Windows OS:
How to use SASS with Netbeans 8.0.1
Cannot get SASS to output .css file in Netbeans 8.0
Netbeans - installing SASS
Please help, I've been trying to make it working for the last 4 hours :(
Please tell me at least where can I find an error log or something.
Update:
The log says:
INFO [CPOnSaveHook]: processSavedFile called for Sass type on project
/var/www/html/analytics. INFO
[net.sickill.off.netbeans.NetbeansProject]: fileChanged: ignoring
internal file changes INFO
[org.netbeans.modules.css.prep.process.BaseProcessor]: Not compiling,
file /var/www/html/analytics/src/AppBundle/Resources/scss/admin.scss
not matched within current mappings
[Pair[/var/www/html/analytics/src/AppBundle/Resources/scss,/var/www/html/analytics/web/css]]
But as I said: In project properties / Input and Output fields I tried relative and full urls. I also tried using ${web.root} variable.
I solved my problem.
In the project properties -> css properties -> input/output fields there must not be / (a slash) at the beginning. So it should be e.g. "src/AppBundle/Resources/scss" instead of "/src/AppBundle/Resources/scss" And it should not be a full url (like /var/html/www/project...)
Also, using ${web.root} did not work.
I solved may problem. In project properties -> css prepocessor -> uncheck compile sass files on save:
With Vuforia's ImageTargets sample application, I tried using OpenGL ES 1.1 by setting USE_OPENGL_ES_1_1 to true in jni/Android.mk and uncommenting and changing the corresponding line in AndroidManifest.xml (). After converting the project so that it has a C++ perspective and associating ndk-build and the proper include directories, I could successfully run the application on my Android device.
However, the problem is that once I open up jni/ImageTargets.cpp, I get several errors from Eclipse, all from places where OpenGL ES 2.0 code would execute, the first one being:
Description Resource Path Location Type Symbol 'vertexHandle' could
not be resolved ImageTargets.cpp /ImageTargets/jni line 402 Semantic
Error
Sure enough, vertexHandle is defined at the top of the ImageTargets.cpp, inside the "#ifdef USE_OPENGL_ES_2_0" block. Because USE_OPENGL_ES_2_0 is not defined (per Android.mk), the code should be able to compile successfully, and sure enough, ndk-build does not report any problems. So it seems that only Eclipse reports the problems and when I run the project, Eclipse says, "Your project contains error(s), please fix them before running your application." And thus, I cannot run my application anymore. In a sense, it's kind of strange that this never occurred until I opened ImageTargets.cpp and Eclipse "discovered" the errors.
The best work-around I've found so far is to just delete or comment out those lines (that should not be causing problems because USE_OPENGL_ES_2_0 is not supposed to be defined)... Is there a better way to deal with this problem? Did I miss a setting in Eclipse that should solve this?
I've found a solution: go to the project properties -> C/C++ Build -> Discovery Options -> Check "Automate discovery of paths and symbols"
I have this Metro App project that I just tried building for the Windows Store.
After completing the buildprocess (with no errors) I can't open the appxmanifest xml file in visual studio anymore. If I select "STORE" > "Edit App Manifest" I get the following error message: "Value does not fall within the expected range."
I can't open any manifest file in any project now.
Does anybody know whats happening, do I need to reinstall Visual Studio or whats going on?
I'm pretty desperate, so any suggestions are welcome.
Found the answer here http://forums.asp.net/t/1836720.aspx/ - so i tried deleting the .suo files from the project, and now it seems to work. I have no clue why that would affect newly created/other/checked out projects, weird behavior indeed?
(Since I am both new to SO and to Visual Studio, I don't know if answering my own question is considered bad practice, if it is, please let me know what I should do instead)
It's an XML file, so you could try to open it with a text editor to figure out if there's an invalid value set somewhere. You could always compare to a default Package.appxmanifest from a new project.
Can your fellow coworker open the manifesting file you're having trouble with?
The first thing to check is to make sure you are running Visual Studio as an admin. (Right click, run as administrator)
Try creating a completely new project. Save it without modifications. Build it. See if you can open the manifesting file in that project. If you can't, try a XAML/C# project instead of JS just to see if something is wrong with the specific project type.
And before you try completely reinstalling, you might try resetting your Visual Studio settings. Make sure to take a backup just in case you need to get your environment back to where it was once you find the issue.
http://msdn.microsoft.com/en-us/library/ms247075.aspx
so once again, I'm having a little problem I can't figure out myself. Meaning, I'm pretty sure I know what the problem is, I just can't fix it.
I'm developing in C++ using Netbeans 7.01 with CMake 2.8.6. However, when I'm trying to build a project, I get the following error from CMake:
CMake Error: The path to the source directory:
H:/Projects/Netbeans/CppApplication_1/CONF=Release
contains unsupported character '='.
Please use a different source directory name.
Please note, that "CONF=Release" isn't a folder. It seems to be a configuration flag set by Netbeans, as it changes when I'm trying a debug build. So, my guess here is, that theres a space missing, or something similar. Unfortunately, I can't figure out where to change that. There are no options in any related Netbeans window, I can't find anything related in the configuration files for netbeans itself or the project either.
Did anyone here have experienced the same problem and found a solution to it? I would be very glad to hear it. If there's any information missing, let me know, I will add them as fast as possible.
Edit:
Just noticed there is already version 7.1 of netbeans, nice to know. However, even with this version, the same problem occurs.
You must specify the command you ran to allow for the error to be identified. However, it looks like you missed the "source-path" parameter.
The cmake command ends with the path to source and should be something like:
cmake -D CONF=Release <path to source>