I'm trying to follow along with a tutorial video and I am unable to get past the 1st step of creating the project using react next js. Within Visual Studio Code I enter the following then am giving the response -
after opening vscode and opening a terminal I type
-npx create-next-app -e with-tailwindcss ( then my projects name )
After I press enter, the files start to download, but then I receive an error as stated below
-Downloading files for example with-tailwindcss. This might take a moment.
? Could not download "with-tailwindcss" because of a connectivity issue between your machine and GitHub.
Do you want to use the default template instead? ยป (Y/n)
I am unable to start the project because I am receiving the error that there is a connectivity issue between my machine and github. I do not understand why because I have never seen this error before prior to using the command npx- create-next-app -e with-tailwindcss
If I type npx create (project name) I do not receive an error and there is no connectivity issue between my machine and github.
Does anyone know how to solve this? I have been browsing everywhere and cannot find the solution. Thank you !
Related
I am a student who has gotten a part time job embedded system programming. I am given a program the company uses, and asked to understand it. This is a working program. Therefore, the project can be built and flashed on ESP32 by the developers with no problem. So, the code and CMake files should have no issues. However, I cannot build the program either with VSCode extension nor with idf.py. In fact, I cannot build esp-idf examples from the official website, either.
Note: I am new to StackOverflow as well as to ESP32, so sorry if I made any mistakes here. If this post is problematic in any way, please inform me.
The error message from the terminal is shown here
I was initially using VSCode on Windows 10 (Windows is not activated). At first, ESP extension was completely failing to start the building process because it could not locate the tools. I was getting "could not be located" errors for all the tools. Below is a list of what I did in this setting:
I had v5.0.0 for esp-idf downloaded from Espressif server. I deleted it and tried v4.3.3 and then I tried to download from Github server. I downloaded the requirements for idf.py scripting environment and completed the settings for it as described by the Espressif's documentation.
I manually set the environment variables for IDF_PATH and PATH for both the user and for the system.
After 2, the initial error was gone. Unfortunately, I had a new error which indicated that ".elf" file for the project output could not be found. I do not exactly recall the error but if it is integral to the problem's solution I can try to replicate this issue.
I tried to delete and reinstall VSCode. I tried running VSCode with admin authority.
I tried changing the IDF_TOOLS_PATH in the VSCode esp-idf extension configurations from ".espressif" to "esp\esp-idf".
At this point, I moved to try to build the project on Ubuntu 22.04.1 LTS:
In Ubuntu, I got the fatal error: esp_event.h: No such file or directory error.
It does not seem to be a common issue and I could not find much about it online.
I followed the Linux setup steps in the documentation. It said that only step 1 (Downloading the prerequisites) was necessary for the VSCode extension.
I decided to try the "master branch" from esp-idf configurations as well. After I downloaded the master branch, the error changed to the current version: 'fatal error: esp_wifi.h: No such file or directory'
I also tried the idf.py in Ubuntu but I got the same error.
Both in Ubuntu and in Windows, the Doctor Command returns nothing. It does not even open the terminal or any window. I am not sure what it should return but some online discussions were asking about its return so I wanted to note it here.
Edit: When I tried the examples on Ubuntu, they actually build just fine. Doctor Command also works with examples.
However, the main code has still issues. Initially, I assumed I made some mistakes with esp-idf configurations. But, perhaps that was not the case.
I had the same problem and ended up editing my project's CMakeLists.txt. When I added "esp_wifi" to the "REQUIRES" list, it worked for me:
idf_component_register(
SRCS "main.c"
INCLUDE_DIRS res
EMBED_FILES res/settings.html
REQUIRES esp_wifi
)
I followed the Flow installation guide for npm & babel and when I get to the second stage where you flow init I keep getting the error message zsh command not found: flow. I installed flow into my project (a branch of my Gatsby blog) for testing/debugging purposes. It is not installed globally, which is what the Flow docs state is the best practice:
Flow works best when installed per-project with explicit versioning rather than globally.
I have been having a similar issue with Lume that returns zsh command not found: lume
If I enter echo $PATH
The colon delimited list should have user/local/.deno/bin:$PATH but it is not there. If I add it by running:
export PATH="/Users/yourUserName/.deno/bin:$PATH"
Than I am able to run lume commands. However, when I try to run lume commands the next day I have to go through the whole process once more as the error crops up again...
My question here today is regarding the Flow error and getting it sorted. I only mention the Lume error because it makes me fairly certain something is messed up in $Path or my Zsh config. I am just not sure what. The only caveat to that hunch though is that Deno is a global install, whereas Flow is installed directly into my project...
So, maybe the two errors while the same syntax are totally separate?
Thank you in advance for any guidance/suggestions. Cheers!
I came across this video from 2017 no less and the host had issues with flow not working within the project and so he installed it globally. I gave it a shot and the flow error zsh command not found: flow has been resolved...
I tried internet search on this issue and it is very common with many suggestions. The problem started with an update to VS2019 in which I paused because my projects in VSCode were breaking.I did a system restore and when I tried to start VSCode I got a message saying my installation was corrupt. So I reinstalled to the latest version and now get this error.
A fatal error was encountered. The library 'hostpolicy.dll' required to execute the application was not found...
I found 3 extensions that needed updating so I do so but did not fix this problem. Do not know if I need to update the .Net Core since it looks like a version mismatch. It seems these updates are wreckless since they always cause thing to go wrong.s
If you are facing this problem, it means you are using Windows.
This official microsoft live share github page explains how to fix the issue: https://github.com/MicrosoftDocs/live-share/issues/102
Especially, check out this comment: https://github.com/MicrosoftDocs/live-share/issues/102#issuecomment-366509735
make vscode is up to date
uninstall live share from vscode
close vscode completely
restart vscode as administrator
reinstall live share
I should add:
close completely vscode and restart it
really confused about this and don't know where to start.
Basically i have generated a new angular project with the "dotnet new angular" command.
Im using a fresh machine, node, npm etc etc are all up to date.
My issue is this template just does not work out of the box. When i run the application, all of the frontend will load however, any requests to the api's etc will 404 stating that it cannot find the url.
Message in Chrome console: "Error: Uncaught (in promise): Error: Cannot match any routes. URL Segment..."
My application runs on a different port everytime I execute the "dotnet run" command. Is this supposed to be the case ? Whichever port is generated, this will be the problematic one.
I have to manually change to port 5001 for anything to function correctly (although this comes with annoying security prompts.)
I am using visual studio code for this project. The funny thing is, if i run this project via visual studio (not code) i get a consistent static port number that will function as intended (this also comes with annoying security prompts) so i have to assume its this random port number that vscode is generating ?
Im honestly not to familiar with this so I could be way off admittedly. Any help or advice would be appreaciated. I'd post code snippets if I knew where to start.
PS, I know that I can of course just not run it with VSCode and just stick to Visual Studio. I'd rather understand the issue than ignore it though.
Thanks, in advance.
I'm following the tutorials and samples of the official WSO2 ESB documentation. When I create (or load) a synapse configuration in the WSO2 Developer Studio I'm getting the error as shown below:
Save problems
Save could not be completed.
Reason:
resources\sunErrorHandler.esb_diagram (The system cannot find the path specified)
This error shows up when I want to open anything in the Design view. Even when I'm not trying to save anything.
So far I have tried to add the path specified in the error, but without success. I already found a workaround to be able to save and deploy my ESB configurations. By using "Save as" I'm able to keep the changes I made in the XML files. However the error stills shows up when I open the new version of the file.
Does anyone know a better solution to permanently resolve this error message?
I had this problem as well, running eclipse.exe as administrator fixed it.
Issue remains unresolved for my Eclipse + DevStudio 3.8.0 install on a Windows 10 environment. However since I was experiencing some other issues with the WSO2 ESB I decided to migrate to a Linux (Ubuntu) environment. This seems to work much better, the eclipse does not seem to have this issue on Linux.
Eclipse want to write in C:\Program Files\eclipse\resources. I solve problem by adding full permissions to group users on folder C:\Program Files\eclipse
If this happens in Mac you can provide the required permission to the "/Applications/IntegrationStudio.app/Contents/MacOS/resources" folder.